Marine Plumbing & Ventilation The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.   We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.

Flojet 02840-000-Garden Hose Fitting Water Sys 115V 4.5/40 Sw  Flojet- Diaphragm Pump Water Booster System 115V, 4.5GPM, 40psi Switch, 1.1 Gallon Accumulator Tank, with Garden Hose Fittings

Date: March 1, 2011 Field Notice Number:  311-C11 Models or Product Affected: Cruisair & Marine Air Systems   Immediate Action Is Required In Order To Avoid Damage To Your Vessel   Please see these two PDF's   311-C11_POE-Oil-With-CPVC-Plumbing   301-F10_Antifreeze Mandatory For Chillers

Minimalistic Compact Single Level Mixer - Deck Mount - 3/8" & 1/2" Fittings This part is a minimalistic compact mixer with an above-counter hose connection. Supplied with fittings for 3/8 in. BSP-M or 1/2 in. NPS-M hose attachment. Features: Ideal when used in combination with one of the shower rail systems.  Will not require a bulkhead elbow to route plumbing behind the bulkhead Specifications: Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings Material: Chrome-plated brass Mounting Hole: 1-1/4"= in. Height: 3-3/4 in. Shipping Weight: 4 lbs.

SeaStar Fittings Kit Fittings kit for plumbing your Garmin hydraulic autopilot for most SeaStar steering systems.  What's In The Box? 3 pieces of 1/4” NPT male to marine tube male (3/8” compression) fittings kit (nut & sleeve included) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

BLASTER™ II Washdown Pump Kit - 12 VDC - 3.5 GPM w/25' Hose, Nozzle, Strainer & Fittings SHURFLO's 4338 series wash down pump design was created with a unique over-molded single-piece diaphragm, assuring long life and top performance in all deck wash down plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the BLASTER II Series pumps are designed for the toughest marine wash down applications. SHURFLO's quality reputation has been built on the reliability and dependability of every pump we build. The BLASTER II Series wash down automatic demand pumps are thermally protected and can run dry without damage. Fittings and nozzle included. Ignition protected. Features: 3901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor 4 Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE

ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8" ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight. They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate. Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. An aluminum counter flange and a mosquito screen are available for these hatches. Features: External Dimensions -  13 1/8" x 13 1/8" Cut Out Dimensions - 10 1/4" x 10 1/4"  Number of Handles - 1 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MAGNUS Ventilation Hatch - OD 12-5/16" x 12-5/16" Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market. Features: External Dimensions -  12 5/16"" x 12 5/16" Cut Out Dimensions - 10 1/4" x 10 1/4" Number of Handles - 1 *VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Cowl Ventilator Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements. For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws. Installation Hole Size: 3-1/4" to 3-1/2" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bumper Cap with Insect Screen - 2-Pack Replace lost or damaged RV bumper caps with Camco’s RV bumper caps, featuring vent holes and a squeeze grip for easy installation and removal. Holes allow ventilation while keeping flying insects out. It fits standard OEM 4-inch square bumpers and is constructed of durable polyethylene. Patented. Features: Keeps nesting insects out; smaller holes provide no-insect ventilation Fits standard OEM 4-inch square bumpers Squeeze grip for easy installation and removal Includes clip-on saver Durable polyethylene construction *Sold as a pack (2)

Rhino X RV 20' Sewer Hose Kit - Pre-Attached 360-Degree Swivel Fittings Camco's Rhino X is an all-inclusive, maximum compression RV sewer hose kit that provides the ultimate compact storage. The Rhino X compresses more than any other RV sewer hose to open valuable storage space. This 20-foot kit provides the equipment users need for a quick, reliable sewer hook-up. It includes (2) 10-foot heavy-duty 23mil polymer sewer hoses with pre-attached swivel fittings—(1) end with bayonet and lug, (1) end with bayonet and transparent elbow, and a 4-in-1 adapter; and (4) storage caps. The sewer hose is designed to hold its shape and stay in place during use. The included 4-in-1 adapter is compatible with a 3-inch slip or 3-inch, 3-½-inch, and 4-inch NPT threaded sewer connection. The transparent elbow allows you to see when your tank is empty. Fittings swivel 360° for a simple connection. Once the 4-in-1 adapter is removed, the sewer hose fits in 4-inch square bumpers. The hose and fittings compress to approximately 31 inches. Features: Compresses more than any other RV sewer hose to open up valuable storage space This 20-foot RV sewer hose kit provides the equipment needed for a quick, reliable sewer hook-up The sewer hose is designed to hold its shape and stay in place during use Once the 4-in-1 adapter is removed, the sewer hose fits in 4-inch square RV bumpers; The hose and fittings compress to approximately 31-inches Kit Includes: (2) 10-foot heavy-duty 23mil polymer sewer hoses with pre-attached swivel fittings (1) End with bayonet and lug (1) end with bayonet, transparent elbow, and 4-in-1 adapter (4) storage caps

Closable Deck Ventilator Type The UFO2 is a high-gloss polished deck ventilator with an integral mushroom ventilator that can be made watertight. When opened, it ensures ventilation and is rain- or splash-proof. Specifications: Material: Stainless steel Hose Connection Diameter (mm): N/a Free Flow Area cm²: 30 Sort Ventilator: 0

SHURFLO PRO WASHDOWN KIT™ II Ultimate - 12 VDC - 5.0 GPM - Includes Pump, Fittings, Nozzle, Strainer, 25' Hose SHURFLO's PRO WASHDOWN KIT II includes everything you need for those tough applications in fish box, scaling, anchor chain cleaning and blasting down the grimiest decks all in one kit! The kit includes a washdown pump (Ultimate 5.0), fittings, nozzle, raw water strainer and a 25' coiled hose. Features: Replaces 5901 Sealed Switch Sealed Motor Corrosion Resistant Electro Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Fittings, Nozzle, Raw Water Strainer and a 25' Blue Coiled Hose Included

RhinoEXTREME 15' Sewer Hose Kit with Swivel Fitting 4 In 1 Elbow Caps Camco's RV Rhino EXTREME 15' Sewer Hose Kit has all of the features that Rivers are looking for in a sewer hose. The Rhino EXTREME hose will not dent or rust and will not crush if accidentally stepped on. The sewer hose offers superior abrasion resistance for maximum protection against pinholes and leaks. The 15' kit comes with pre-attached Rhino swivel fittings, snap-glue fittings, and storage caps. The hose has been successfully tested down to -40 degrees Fahrenheit. The removable 4-in-1 adapter allows you to store in 4” square bumpers. Features: Sewer hose has superior abrasion resistance and crush protection Includes pre-attached Rhino swivel fittings - bayonet and transparent elbow with 4-in-1 dump station fitting Also includes snap-glue fittings and storage caps. 4-in-1 adapter allows storage in 4" square bumpers Rhino EXTREME hose will not dent or rust and will not crush if accidentally stepped on Rhino EXTREME hose will not dent or rust and will not crush if accidentally stepped on

Hydraulic Hose Kit 6' - Two Hoses with Bulkhead Fittings Two high-pressure flexible hoses with pre-crimped nickel-plated fittings, bulkhead fittings (for KIT OB-BHBR only), and bend restrictors on one end.  Application: Recommended for use with all Uflex helms with 1500 psi relief valves Specification: Hose Length (feet): 6’