|
Bumper Rope with Carabiner
5-foot Bumper Extension Upgrade and Carabiner.
Features:
5' poly rope braided
Grey Poly rope with black strands
Includes a float
One side has a carabiner for the bumper
The other side gets an 8” loop
Upgrade M3001 bumper ropes with this high-end 5-foot extension
Also great for dock lines
Tie up your boat or kayak as well
|
13.50 |
|
|
Anchoring & Docking
Are you heading out on the water? Make sure you have a great boat anchor onboard. Having an anchor on standby is the easiest way to ensure you are safe. If your engine dies, you need an anchor to hold you in place while making repairs. If you want to get out into the current, you need an anchor to keep you in place while fishing or swimming. We have the right anchor for your boat.
Your boat is not a bumper car. To protect your investment and keep your boat looking good, make sure you have boat fenders. When it comes to docking, the risk of rubbing or bumping increases unless you are prepared to prevent it Choose from our wide range of fenders and dock bumpers to ensure your boat is docked safely without a single scratch.
|
|
|
Dock Edge Dolphin Dockside Bumper
7" x 16"
The ultimate in heavy impact protection
Rugged, air filled Heavy-wall molded PVC & integral inflation valve
Angled ends to deflect craft
Use Straight bumpers in pairs to form inside corners
Excellent gunnel protection
Industrial Strength with the Standard Quality and Performance of Dolphin Fenders
Product Specifications:
Part No.: 1060-W-F
Description: Dock-Side Dock Bumper, 7" x 16", White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
29.70 |
|
|
Dock Edge Dolphin Dockside Bumper 12 x 12 Corner White
The ultimate in heavy impact protection
Rugged, air filled Heavy-wall molded PVC & integral inflation valve
Angled ends to deflect craft
Use Straight bumpers in pairs to form inside corners
Excellent gunnel protection
Industrial Strength with the Standard Quality and Performance of Dolphin Fenders
Product Specifications:
Part No.: 1064-W-F
Description: Dock-Side Dock Bumper Corner, 12x12, White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
48.68 |
|
|
Premium Anchor Rode 215'-15' of 1/4" Chain & 200' of 1/2" Rope w/Shackle
This Premium Lewmar 215' anchor rode kit features 15 feet' of windlass chain spliced to 200' of 8 Plait line.
Features:
Eight (8) Plait rope is woven together with eight (8) individual braided strands. Outperforms the 3-strand once it is wet and used.
Technical Specifications:
Total Length - 215'
Chain Length - 15'
Chain Size - 1/4"
Chain Type - G4
Rope Length - 200'
Rope Size - 1/2"
Rope Type - Eight (8) Plait
Shackle - Not included
*Sold as an Individual
|
507.36 |
|
|
Stow 'n Go Low-Profile Dock Box - 40"L x 19"W x 20"H
With a UV gelcoat finish and the stainless steel lockable latch and hardware these are built tough. Our dock boxes incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas and allows for a slower, more controlled closing. These fiberglass molded dock boxes are also constructed with a smooth interior finish which helps prevent splinters in your hands when storing or retrieving your boating accessories.
Features:
40"L x 19"W x 20"H
Heavy duty stainless steel lockable latch and hinges
Gas shocks come standard on all models
|
691.46 |
|
|
15' Boat Bumper
FATSAC Bumpers are a great way to protect your boat from any scratches, dents, or dings during boat tie-ups, lake parties, or when pulling your boat up to a dock to gas up. They can also be hung from your dock to protect your boat when pulling back up whether to pick up more friends or grab more gear!
Features:
15’ feet long x 20” diameter
UV-resistant material and ink.
Made from the same durable high strength material as our Fat Sacs.
Seams are welded and taped for extra durability
Includes 2 of the 5’ foot rope extensions, to be used on each tie-down cleat (1 on each end), to hang the bumper.
Bumpers are inflated through the Halkey-Roberts air valve fitting. FatSac air pumps work best to fill the bumpers, however, bumpers can be filled with any air pump.
FatSac Bumpers can be hung off the side of a boat or the side of a dock. IMPORTANT – After filling, ensure the air-fitting cap is screwed on tight to keep air from leaking out.
Hang the FatSac Bumper using the cleats on each end. Bumpers should sit on the water or slightly above to prevent a collision.
*FatSac Bumpers are to be used only for boat tie-ups and docks. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!
|
263.26 |
|
|
5' Boat Bumper
FATSAC Bumpers are a great way to protect your boat from any scratches, dents, or dings during boat tie-ups, lake parties, or when pulling your boat up to a dock to gas up. They can also be hung from your dock to protect your boat when pulling back up whether to pick up more friends or grab more gear!
Features:
5’ feet long x 20” diameter
UV-resistant material and ink.
Made from the same durable high strength material as our Fat Sacs.
Seams are welded and taped for extra durability
Includes 2 of the 5’ foot rope extensions, to be used on each tie-down cleat (1 on each end), to hang the bumper.
Bumpers are inflated through the Halkey-Roberts air valve fitting. FatSac air pumps work best to fill the bumpers, however, bumpers can be filled with any air pump.
FatSac Bumpers can be hung off the side of a boat or the side of a dock. IMPORTANT – After filling, ensure the air-fitting cap is screwed on tight to keep air from leaking out.
Hang the FatSac Bumper using the cleats on each end. Bumpers should sit on the water or slightly above to prevent a collision.
*FatSac Bumpers are to be used only for boat tie-ups and docks. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!
|
190.36 |
|
|
Combo Fender/Rope Wrap with Carabiner
This combo combines the best of both worlds. The fender wrap allows you to attach to almost any object. the carabiner rope wrap allows for quick and easy retrieval of ski ropes, life jackets, virtually anything you can wrap and hang.
|
25.98 |
|
|
HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with Capstan
Designed for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.
Kit Includes
Windlass
On/Off Breaker Panel
Reversing Solenoid
Up/down Panel Switch
Clutch Release Handle
Features
The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass
Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope.
The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope.
The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
Case Material: Anodized Aluminum
The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section.
This two piece watertight case allows for quick and easy, on-deck,routine maintenance.
Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up.
The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain).
The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series.
The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs.
High quality Stainless Steel chainwheels
The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.
The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker.
Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required.
The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel.
Exclusive Maxwell 3 YEAR Limited Warranty
Specifications
Maximum PUll: 1540 lbs
Chain Short Link: 5/16" or 8mm
Chain Speed (Anchor Retrieval): 79 ft per Minute
Rope Speed (Anchor Retrieval): 65 ft per Minute
Rope Size (Nylon 3 strand or 8 Plait): 5/8"
Power Supply (DC): 12VDC
Motor Power: 1000 Watts
Net weight: 42 lbs
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2213.51 |
|
|
Torpedo Pipe Bumper - 18" - Royal Blue
These large, durable bumpers add an attractive and functionally rugged cushion to the leg pipes of your docking system. Each measures 18" (45.7cm) tall with a diameter of 5" (12.7cm). Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D.
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
26.32 |
|
|
3.3lb Grapnel Anchor Kit with Storage Bag
Anchor a kayak, canoe, or small boat worry-free with the YakGear 3.3-pound (1.5kg) Grapnel Anchor Kit. This 3.3-pound (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface in deeper and faster-moving water. 30 feet of 3/16-inch black nylon anchor rope and a storage ditty bag are included.
Features:
3.3 lb. galvanized steel Grapnel Anchor
Four folding 6" tines for easy storage
Locks in an open or closed position
A heavy head allows for easier anchoring
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
22.40 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
1098.38 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 300’ 1/2” Rope
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 1/2 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
757.91 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 150’ 9/16” Rope
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 150 ft. 9/16 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
413.42 |
|