8 lengths to meet your needs All rodes comes with a tapered backsplice 1/2" and 5/8" Powerwinch premium three strand nylon line, tested to be the highest quality and best performing line Acco G4 Hi-Test 1/4" and 5/16" chain

Anchor Rode 15’ 5/16” G4 Chain with 200’ 5/8” Rope with Shackle An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation. *A shackle is included for a secure and convenient anchor attachment point Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With: Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses Specifications: Rope: 200 ft. 5/8 in. 3-strand nylon  Chain: 15 ft. 5/16” G4 chain

8 lengths to meet your needs All rodes comes with a tapered backsplice 1/2" and 5/8" Powerwinch premium three strand nylon line, tested to be the highest quality and best performing line Acco G4 Hi-Test 1/4" and 5/16" chain

8 lengths to meet your needs All rodes comes with a tapered backsplice 1/2" and 5/8" Powerwinch premium three strand nylon line, tested to be the highest quality and best performing line Acco G4 Hi-Test 1/4" and 5/16" chain

Quick Anchor-Rode Rope and Chain 20' of 10mm Chain, 200' of 5/8" Rope Slim Splice Quick System Rope and chain An anchor-rode is the connection system between anchor and the boat and its sturdiness during mooring is undoubtedly essential. The critical point of the rope and chain combination is the joint, or technically speaking, the splice. In Quick's Slim Splice, the splice is much slimmer and more tapered, preventing the jamming which often occurs on the gypsy, during changeover from rope to chain. Quick's Slim Splice consists of a calibrated chain and a top quality 3-strand polyester rope, to guarantee optimum strength and life.

Scot Pump 131-200 SEAL - 5/8" SHAFT

Anchor Rode 15’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation. *A shackle is included for a secure and convenient anchor attachment point Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With: Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses Specifications: Rope: 300 ft. 5/8 in. 3-strand nylon  Chain: 15 ft. 5/16” G4 chain

Anchor Rode 15’ 5/16” G4 Chain with 150’ 5/8” Rope with Shackle An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation. *A shackle is included for a secure and convenient anchor attachment point Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With: Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses Specifications: Rope: 150 ft. 5/8 in. 3-strand nylon  Chain: 15 ft. 5/16” G4 chain

Anchor Rode 15’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation. *A shackle is included for a secure and convenient anchor attachment point Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With: Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses Specifications: Rope: 300 ft. 5/8 in. 3-strand nylon  Chain: 15 ft. 5/16” G4 chain

Anchor Rode 20’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation. *A shackle is included for a secure and convenient anchor attachment point Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With: Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses Specifications: Rope: 300 ft. 5/8 in. 3-strand nylon  Chain: 20 ft. 5/16” G4 chain

8 lengths to meet your needs All rodes comes with a tapered backsplice 1/2" and 5/8" Powerwinch premium three strand nylon line, tested to be the highest quality and best performing line Acco G4 Hi-Test 1/4" and 5/16" chain

HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" Rope Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlass has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors. The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval. As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode. Features: Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section 2-piece watertight case allows for quick and easy, on-deck, routine maintenance Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required = The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RC10-10 Capstan Windlass 12V - 3/8" Chain & 5/8" Rope The combined stainless steel and chromed bronze RC10 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm (5/16") and 10mm (3/8") short link chain and 14mm and 16mm (5/8") three strand or 8-brait (plait) rope. A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. Full disassembly capability of the topworks utilising only the handle provided and an Allen key. The RC10 is manufactured from marine-grade 316 stainless steel and chromed bronze for long term durability. The heavy duty stainless steel pressure arm, coupled with the unique rope/chain gypsy, is designed to effectively grasp the splice between rope and chain, giving the RC10 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm pivots on a trouble free bearing, thereby exerting maximum control pressure on the rode and splice. The RC10 works just as effectively with all chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, Free Fall anchoring. Sealed oil bath and marine-grade hard anodized, alloy gearbox provides maximum output via a precision worm and worm wheel. Features: Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, Free Fall anchoring. Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Anchor Rode 215'-15' of 1/4" Chain & 200' of 1/2" Rope with Shackle This Lewmar 215' anchor rode kit features 15 feet' of windlass chain spliced to 200' of 3-strand line and comes with a D shackle. Technical Specifications: Total Length - 215' Chain Length - 15' Chain Size - 1/4" Chain Type - G4 Rope Length - 200' Rope Size - 1/2" Rope Type - 3 Strand Shackle - 5/16" D *Sold as an Individual

Anchor Rode - 20'-5/16" Chain to 200'-5/8" Nylon Brait 20' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields a product with a firm strand formation yet full stowage flexibility. The unique construction offers maximum strength and energy absorption, and working windlass grip-hold. Applications: Docklines and anchorlines Construction: 8-strand Nylon Specific Gravity: 1.14