|
Levered Chain Stopper f/5/16" or 8mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain.
8mm (5/16"):
B - 72mm (2-7/8")
C - 20mm (7/8")
F - 152mm (6")
G - 92mm (3-5/8")
G1 - 30mm (1-3/16")
I - 70mm (2-7/8")
J - 31.5mm (1-1/4")
J1 - 10mm (7/16")
K - 51.5mm (2-1/8")
L - 95mm (3-3/4")
M - M10
|
269.10 |
|
|
Levered Chain Stopper f/3/8" or 10mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain.
10mm (3/8"):
B - 86mm (3-7/16")
C - 20mm (7/8")
F - 190mm (7-1/2")
G - 130mm (5-1/8")
G1 - 30mm (1-3/16")
I - 86mm (3-1/2")
J - 44mm (1-3/4")
J1 - 10mm (7/16")
K - 64mm (2-5/8")
L - 95mm (3-3/4")
M - M10
|
376.20 |
|
|
Economy Chain Stopper f/5/16", 3/8", 8mm & 10mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain.
8/10mm (5/16"/3/8"):
B - 62mm (2-3/8")
C - 6mm (1/4")
F - 80mm (3-1/8")
G - 46mm (1-4/4")
G1 - 17mm (5/8")
I - 92mm (3-5/8")
J - N/A
J1 - 37mm (1-1/2")
K - 74mm (2-7/8")
L - N/A
M - M10
|
81.36 |
|
|
HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with Capstan
Designed for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.
Kit Includes
Windlass
On/Off Breaker Panel
Reversing Solenoid
Up/down Panel Switch
Clutch Release Handle
Features
The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass
Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope.
The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope.
The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
Case Material: Anodized Aluminum
The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section.
This two piece watertight case allows for quick and easy, on-deck,routine maintenance.
Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up.
The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain).
The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series.
The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs.
High quality Stainless Steel chainwheels
The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.
The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker.
Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required.
The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel.
Exclusive Maxwell 3 YEAR Limited Warranty
Specifications
Maximum PUll: 1540 lbs
Chain Short Link: 5/16" or 8mm
Chain Speed (Anchor Retrieval): 79 ft per Minute
Rope Speed (Anchor Retrieval): 65 ft per Minute
Rope Size (Nylon 3 strand or 8 Plait): 5/8"
Power Supply (DC): 12VDC
Motor Power: 1000 Watts
Net weight: 42 lbs
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2213.51 |
|
|
Single-Hook Anchor Chain Tensioner for 5/16" Chain
These fittings will securely tension and hold the anchor in the bow roller channel. They will free up use of the bow cleat and prepare the anchor for sea condition assuring you peace of mind. This fitting is not designed to take the strain of the rode of a boat at anchor. "Single Hook" style has overall length of 12", the threaded hook has 1-1/2" of adjustment for ease of installation.
|
105.34 |
|
|
Chain Grip for 5/16" (8mm) Chain
Perfect to ensure safe anchoring by easing the tension on the anchor chain. Protects the boat by reducing the chafe of the chain on the rub rail and roller chock. Positioned between two links of the chain (single-handed operation). Optimized design to avoid accidental release of the chain.
Features:
One-piece with nonmoving parts
Forged in Duplex stainless steel grade (increased mechanical & corrosion resistance)
Made in France
Rope size: 22 mm
Specifications:
Chain diameter: 8 mm (5/16")
Rope diameter: 17 mm (5/8")
Working load: 480 kg (1,050 lbs)
Breaking load: 890 kg (1,960 lbs)
Weight: 88 g (0.194 lbs)
Length: 85 mm ( 3-11/32")
Applications:
Mouillage
|
43.02 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 300’ 1/2” Rope
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 1/2 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
757.91 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 150’ 9/16” Rope
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 150 ft. 9/16 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
413.42 |
|
|
VWC1000 Windlass 5/16" - 3B Chain
The VWC Series of windlasses is designed for automatic (hands-free) handling of chain-only anchor rodes. They have an integral chainpipe and chain stripper built into the windlass body to facilitate jam-free operation, and automatic delivery of the chain to and from the chain locker.
VWC windlasses are available in two formats — a low profile, chainwheel-only version, and one with an added independent capstan for the retrieval of a secondary mostly rope rode, or to assist with docking procedures.
This entries features the chainwheel with capstan version of the VWC. The vertical capstan on VWC windlasses is ideal for multi-use rope hauling as, unlike horizontal capstans, it can handle lines leading from any direction.
Features:
Voltage: 12V
Chain Size & Type: 5/16", 3B
|
2503.48 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
1098.38 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 150’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 150 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
412.34 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
1016.38 |
|
|
Anchor Rode 20’ 5/16” G4 Chain with 300’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 300 ft. 5/8 in. 3-strand nylon
Chain: 20 ft. 5/16” G4 chain
|
710.58 |
|
|
Anchor Rode 15’ 5/16” G4 Chain with 200’ 5/8” Rope with Shackle
An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.
*A shackle is included for a secure and convenient anchor attachment point
Features:
High-strength, welded chain rated to high-test G4 specs
Hot-dip-galvanized chain links to minimize corrosion
Calibrated for an even pitch
Smooth rope-to-chain transition for seamless windlass operation
Treated, windlass-grade, 3-strand, twisted nylon rope
Fitted to all Lewmar windlasses and rope chain gypsies
Works With:
Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses
Specifications:
Rope: 200 ft. 5/8 in. 3-strand nylon
Chain: 15 ft. 5/16” G4 chain
|
727.07 |
|
|
RC8 12V Windlass - 100W 5/16" Chain to 5/8" Rope
Features:
The stainless steel RC8-6 fully automatic rope/chain windlass is designed to effortlessly retrieve and deploy 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-brait (plait) rope.
The larger stainless steel RC88 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope.
The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series.
A sleek, Low Profile version and a MAX-grip capstan drum version, with drum made in chromed bronze, are available.
Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass.
Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.
The RC8 features Maxwell's revolutionary, and patented, new Wave Design chainwheel.
The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure.
The RC8 works just as effectively with all-chain rodes.
Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
Full disassembly capability of the topworks utilising only the handle provided and an Allen key.
Manual override and Free Fall, using the emergency crank/clutch handle provided.
Sealed oil bath and marine-grade hard anodized, alloy gearbox provides maximum output via a precision worm and worm wheel.
|
1701.31 |
|