RAM Universal Laptop Tough-Tray™ Flat Clamping Arm Kit The RAM RAM-234K1-4U, flat side keepers, attach to the RAM-234-3 RAM Tough Tray. The side keepers allow for your laptop to close completely while in the RAM Tough Tray. Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Universal Laptop Tough-Tray™ Holder The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics. Tough-Tray Dimensions: Tray Depth: 10.0" Tray Thickness: 2.125" Tray Width (Expansion): 10" to 16" Side Clamp Arm Height: 0.5" (min) to 1.75" (max) Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display. The Tough-Tray is compatible with laptops that have 17" screens. If the Tough-Tray Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-n-Motion kit.

RAM Tough Tray II™ Universal Netbook, iPad & Tablet Cradle Holder Well thought out and compact designs are common place at RAM and our new RAM Tough-Tray II is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPCs, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM. Dimensions: Tray Depth: 6.0" Tray Thickness: 1" Tray Width (Expansion): 8.56" to 12.31" Side Clamp Arm Height: 2.75" max Included With Purchase: (1) Laptop Tray (4) Standard Retaining Arms (4) Flat Retaining Arms (Allow for laptops to close while in the tray)

RAM Mount Universal Finger Grip Holder Surface Mount Part #: RAM-B-138-UN4 Simply choose the base mounting hardware and the possibilities become endless with a RAM flat surface mount. Four mounting holes in the round ball base easily accommodate up to a #10 screw. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Universal Finger Grip™ Holder Description: The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. This mount is designed to hold the following devices: Cell Phones 2-Way Radios GPS Devices Height Dimensions: Minimum with Top and Bottom Plates: 5.25" Maximum with Top and Bottom Plates: 6.0" The top and bottom plates can be removed for larger devices. Spine Plate Dimensions: 2.5W x 5.0H" Using Short Arm Side Clamps: Maximum Depth: 0.75" Minimum Width: 1.25" Maximum Width: 3.0" Using Medium Arm Side Clamps: Maximum Depth: 1.25" Minimum Width: 1.5" Maximum Width: 3.5" Using Long Arm Side Clamps: Maximum Depth: 1.6" Minimum Width: 2.25" Maximum Width: 3.5" Material: High Strength Composite and Powder Coated Marine Grade Aluminum Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Mount Universal X-Grip™ Holder Handlebar Rail Mount Part #: RAM-B-149Z-UN7U The RAM-B-149Z-UN7U consists of a double socket arm, handlebar rail mount with zinc coated u-bolt base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone. Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) Samsung Galaxy S7 Samsung Galaxy S7 Edge All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount Universal X-Grip Holder Composite Surface Mount Part #: RAP-B-138-UN7 The RAP-B-138-UN7 consists of a double socket arm, 2.5" round base base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

RAM Mount Universal X-Grip Holder Yoke Glare Mount Part #: RAP-B-121-UN7U RAM Composite Clamp Mount with Universal X-Grip™ Holder. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality composite materials insure your device is safe, secure, and within easy reach. The clamp base fits a rail or edge lip from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base. Extra ball not included with purchase of this mount. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

RAM Mount Universal X-Grip Holder Diamond Base Surface Mount Part #: RAM-B-102-UN7U The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone. Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

No-Drill™ Universal Laptop Mount The RAM® Universal No-Drill™ Laptop features a heavy-duty steel mounting base designed to fit a variety of vehicles. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. The included RAM Tough-Tray™ is spring loaded to accommodate 10" to 17" laptops. The tray features four adjustable retaining arms with rubber grips. These arms can be moved both vertically and horizontally, enabling a custom fit for varying thicknesses of laptops and access to ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support phones or other electronics. Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Patented ball and socket mounting system offers shock and vibration dampening Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry Combination Telescoping pole adjusts both height and swing with one knob Modular system makes changing your vehicle, or your device, simple and cost effective Ability to mount laptops, tablets and other devices using the same mounting system Universal Laptop Tray accommodates most laptops Specifications: Placement of Mount: Passenger side floor board, in front of seat Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel PRODUCT DIMENSIONS:  Height Range: 18.25" - 24" TRAY DIMENSIONS Width Range: 10" - 16" Side Arm Clamp Height: .5" - 1.75" Tray Depth: 10" Tray Thickness: 2.125" HOLE PATTERN Seat Bolt Distance: 9"-18.875" center to center BALL/SOCKET SIZE C Size (1.5")

RAM® No-Drill™ Laptop Mount for '19-21 Chevy Silverado 1500 & GMC 1500 This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Chevrolet All-New Silverado and GMC Next Generation Sierra using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions. Specifications: Placement of Mount: Passenger side, in front, where seat frame meets floor board Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Ball and socket mounting system offers shock and vibration damping Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry Combination Telescoping pole adjusts both height and swing with one knob Modular system makes changing your vehicle, or your device, simple and cost effective Ability to mount laptops, tablets and other devices using the same mounting system Universal Laptop Tray accommodates most laptops Compatibility Chevrolet Silverado 1500 (2019-2021) Silverado 2500 (2020-2021) Silverado 3500 (2020-2021) GMC Next Generation Sierra 1500 (2019-2021) Sierra 2500/HD (2020-2021) Sierra 3500/HD (2020-2021)

RAM® No-Drill™ Laptop Mount for 2019 Ford Ranger This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Ford Ranger using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions. Specifications: Placement of Mount: Passenger side, in front, where seat frame meets floor board Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Ball and socket mounting system offers shock and vibration damping Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry Combination Telescoping pole adjusts both height and swing with one knob Modular system makes changing your vehicle, or your device, simple and cost effective Ability to mount laptops, tablets and other devices using the same mounting system Universal Laptop Tray accommodates most laptops

RAM® No-Drill™ Laptop Mount for '22-23 Toyota Tundra + More The RAM® Universal No-Drill™ Laptop features a heavy-duty steel mounting base designed to fit the 2022-2023 Toyota Tundra and 2003-2010 Ford Focus. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. The included RAM Tough-Tray™ is spring-loaded to accommodate 10" to 17" laptops. The tray features four adjustable retaining arms with rubber grips. These arms can be moved both vertically and horizontally, enabling a custom fit for varying thicknesses of laptops and access to ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on the perimeter of the tray facilitate the mounting of additional RAM® systems to support phones or other electronics.  Features: RAM® No-Drill™ base designed specifically for 2022-2023 Toyota Tundra and more offers low-profile mounting; telescoping pole allows for height adjustments A dual articulating swing arm allows for ideal placement; a universal laptop tray accommodates most laptops Made of powder-coated steel and marine-grade aluminum Backed by a lifetime warranty Specifications: Hole Pattern (inch): Seat Bolt Distance:-17.75" center to center Ball Size (inch): C Size (1.5") Materials: Powder-coated steel; Marine grade aluminum; High strength composite Packaging Type: Box Weight (lbs): 15.0 lb Tray Dimensions (inch):  Width Range: 10" - 16" Side Arm Clamp Height: .5" - 1.75" Tray Depth: 10" Tray Thickness: 2.125" Hardware Included:  Assembly hardware

No-Drill™ Laptop Mount Vehicle System for '17-20 Ford F-Series + More This RAM® No-Drill™ laptop stand system installs quickly and easily into a variety of Dodge, Ford, and Jeep vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.  Features: Placement of Mount: Passenger side, in front, where seat frame meets floor board Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Custom, No-Drill™ mounting base offers lowest profile in the industry Ball and socket mounting system offers shock and vibration dampening Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry Combination Telescoping pole adjusts both height and swing with one knob Modular system makes changing your vehicle, or your device, simple and cost effective Ability to mount laptops, tablets and other devices using the same mounting system Universal Laptop Tray accommodates most laptops Compatible Devices 10" to 16" Wide Laptops & (17" Wide Screens) Compatible Vehicles Dodge Journey (2011-2020) Ford F-150 (2015-2020) F-250-F-550 (2017-2020) Escape (2013-2019) Expedition (2018-2021) Transit Connect (2014-2021) C-Max (2014-2018) Focus (2011-2018) Raptor (2015-2020) Jeep Compass (2013-2021) Patriot (2013-2017)

RAM® No-Drill™ Laptop Mount for '20-21 Ford Explorer This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2020 Ford Explorer using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions. Features: RAM® No-Drill™ mounting base for the 2020 Ford Explorer offers low-profile mounting; telescoping pole allows for height adjustments Dual articulating swing arm allows for ideal placement; universal laptop tray accommodates most laptops Made of powder-coated steel and high-strength composite Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, Foot Stabilizer, (2) M10-1.5 x 75mm Hex Bolts, (2) 1.68" Stand-Offs, (2) 3/8" Fender Washers  Tray Dimensions: Width Range: 10" - 16", Side Arm Clamp Height: .5" - 1.75", Tray Depth: 10", Tray Thickness: 2.125" Hole Pattern: Seat Bolt Distance: 12" center to center Ball/Socket Size: C Size (1.5") Materials: Powder coated steel, Marine grade-aluminum, High strength composite

RAM® No-Drill™ Laptop Mount for '11-21 Jeep Grand Cherokee + More This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provide additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray™ is spring-loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with a rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on the perimeter of the tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Features: RAM® No-Drill™ base offers low-profile mounting; telescoping pole allows for height adjustments Dual articulating swing arm allows for ideal placement; universal laptop tray accommodates most laptops Made of powder-coated steel and marine-grade aluminum Backed by a lifetime warranty Hardware Included: Assembly Hardware (2) M10-1.5 x 60mm Hex Bolts, (2) 1" Stand-Offs, (2) 3/8" Fender Washers Tray Dimensions: Width Range: 10" - 16", Side Arm Clamp Height: .5" - 1.75", Tray Depth: 10", Tray Thickness: 2.125" Hole Pattern: Seat Bolt Distance: 15.125" center to center  Ball/Socket Size: C Size (1.5") Materials: Powder-coated steel, Marine grade-aluminum, High strength composite