Portable Fuel Tank - 3 Gallon without Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Features:  3 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 16.6" Width: (inch) 11.45" Height: (inch) 7.3" *No gauge or fuel line included

Portable Fuel Tank - 12 Gallon without Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Features:  12 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 22.75" Width: (inch) 14.25" Height: (inch) 14.47" *No gauge or fuel line included

Portable Fuel Tank - 6 Gallon without Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine.  Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *No gauge or fuel line included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Low Profile Fuel Tank - 12 Gallon without Gauge This Attwood 12-Gallon Fuel Tank is ideal for use in a pontoon boat, where greater fuel capacity is commonly desired for extended days on the water. This durable, sturdy tank is EPA-compliant and it features a low-profile design. It does not have a fuel gauge. Features:  12 Gallon fuel capacity Low-profile design Compatible with 1/4-inch NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 24" Width: (inch) 18" Height: (inch) 11.61" *No gauge or fuel line included

Portable Fuel Tank - 3 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge. Features:  3 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings High-Contrast, easy to read gage Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 16.6" Width: (inch) 11.45" Height: (inch) 7.3" *No fuel line included

1700 Series Water Heater 120v 20 Gallon W/O Engine Heat Exchanger The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank. Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently. Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT. Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1700 Series Water Heater 120v 12 Gallon W/O Engine Heat Exchanger The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank. Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently. Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT. Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Portable Fuel Tank - 12 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge. Features:  12 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings High-Contrast, easy to read gage Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 22.75" Width: (inch) 14.25" Height: (inch) 14.47" *No fuel line included

Portable Low Profile Fuel Tank - 12 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space. Features:  12 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings High-Contrast, easy to read gage Save space; the low profile is 3 inches lower than regular 12-gallon tanks Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 24" Width: (inch) 18" Height: (inch) 11.61" *No fuel line included

Portable Fuel Tank - 6 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge. Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting High-contrast & easy to read gauge Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *Fuel line is not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Fuel Tank Cap with Tether - EPA Certified High-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines. Features: Standard 2 ¼ inch neck for convenience Includes high-flow automatic vacuum valve Tether Included Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks Easy-to-grip cap features ratcheting noise so you know it’s properly sealed

Nautic Boiler B3 - 5.3 Gallon - 12V - 300W Casing in composite material and Tank in Aisi 316 stainless steel. Benefits: High quality materials Heat exchanger with wide exchange surface Produces hot water from the electric element, that is fitted with an adjustable safety thermostat Relief/non-return vale that allows discharging of the water heater in case of disuse Features: The heat exchanger used for Quick "Nautic Boiler B3” is AISI 316L stainless steel. The heat exchang capacity is notably higher than that achieved from other manufactures. The tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents. The electrical heating element is made of Incoloy®. The thermal insulation is high density polyurethane foam injected between the cover and tank giving excellent heat retention properties. Included Accessories: Tank mounting brackets are in stainless steel AISI 316 and are supplied as standard in each package.

12" x 12" Standard Performance Trim Tab Kit w/o Switch Kit- 12V Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades Kit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 18' to 32' Length of Tab: 12" Width of Tab: 12" Minimum Transom Height: 11" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4" x 12" Limited Space Trim Tab Kit w/o Switch Kit -12V - Electro-Polished - Short Actuator  Lenco Electric Limited Space Trim Tab Kits are ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge - 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible. Kit Contents: 2 each of 12-gauge 304 stainless steel trim tab blades 2 each of #15057-001 XD actuator with 6' lead and Deutsch plugs 2 each of #30133-103  20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting bracket with gland seal 1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 14' to 25' Length of Tab: 4" Width of Tab: 12" Minimum Transom Height: 13" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.