|
Portable Fuel Tank - 12 Gallon without Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed.
Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No gauge or fuel line included
|
109.80 |
|
|
Portable Low Profile Fuel Tank - 12 Gallon without Gauge
This Attwood 12-Gallon Fuel Tank is ideal for use in a pontoon boat, where greater fuel capacity is commonly desired for extended days on the water. This durable, sturdy tank is EPA-compliant and it features a low-profile design. It does not have a fuel gauge.
Features:
12 Gallon fuel capacity
Low-profile design
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No gauge or fuel line included
|
111.10 |
|
|
Portable Fuel Tank - 6 Gallon without Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine.
Features:
6 Gallon fuel capacity
Compatible with 1/4" NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
Cap with built-in vacuum valve means no need for manual venting
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 19.82"
Width: (inch) 13.50"
Height: (inch) 9.16"
*No gauge or fuel line included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
56.62 |
|
|
Portable Fuel Tank - 3 Gallon without Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.
Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No gauge or fuel line included
|
48.78 |
|
|
1700 Series Water Heater
120v
12 Gallon
W/O Engine Heat Exchanger
The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.
Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.
Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.
Benefits:
Simple installation - retrofits to most on-board pressure systems
Proven long-life design
Withstands the rigors of the marine environment
Glass-lined steel tank is more durable than stainless steel
Attractive polymer jacket resists corrosion from dampness
Ignition-protected, adjustable thermostat
Round tanks are designed to withstand more pressure than square tanks
Glass-lined steel tank for long life and high efficiency
Environmentally friendly CFC-free foam insulation
Replaceable magnesium anode to protect tank and neutralize acids in the water
The tank is covered by a five-year Limited Warranty
Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1068.20 |
|
|
Portable Fuel Tank - 12 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge.
Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No fuel line included
|
119.69 |
|
|
Portable Low Profile Fuel Tank - 12 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.
Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Save space; the low profile is 3 inches lower than regular 12-gallon tanks
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No fuel line included
|
118.74 |
|
|
Fuel Tank Strap Set - 72 (inches) Long for 12 Gallon Tanks
This Attwood Fuel Tank Strap Set contains everything needed to secure a 12-gallon fuel tank in place. This kit includes a 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.
Features:
Includes 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle
Run the strap through footman loops, then tighten and buckle to hold the tank in place
|
11.29 |
|
|
1700 Series Water Heater
120v
20 Gallon
W/O Engine Heat Exchanger
The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.
Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.
Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.
Benefits:
Simple installation - retrofits to most on-board pressure systems
Proven long-life design
Withstands the rigors of the marine environment
Glass-lined steel tank is more durable than stainless steel
Attractive polymer jacket resists corrosion from dampness
Ignition-protected, adjustable thermostat
Round tanks are designed to withstand more pressure than square tanks
Glass-lined steel tank for long life and high efficiency
Environmentally friendly CFC-free foam insulation
Replaceable magnesium anode to protect tank and neutralize acids in the water
The tank is covered by a five-year Limited Warranty
Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1146.67 |
|
|
5029
ST Blade Fuse Block w/ Cover - 12 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.26 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Portable Fuel Tank - 3 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.
Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No fuel line included
|
55.08 |
|
|
Portable Fuel Tank - 6 Gallon with Gauge
Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge.
Features:
6 Gallon fuel capacity
Compatible with 1/4" NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
Cap with built-in vacuum valve means no need for manual venting
High-contrast & easy to read gauge
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 19.82"
Width: (inch) 13.50"
Height: (inch) 9.16"
*Fuel line is not included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
62.87 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 12' Length with Sprayless Connectors & Fuel Demand Valve
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 12-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) are in the kit as well.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
Tank Side: Universal Sprayless Quick-Connect
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
Universal for any engines and tanks
*It does not include an engine fitting
|
83.93 |
|
|
Portable Fuel Tank Cap with Tether - EPA Certified
High-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.
Features:
Standard 2 ¼ inch neck for convenience
Includes high-flow automatic vacuum valve
Tether Included
Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks
Easy-to-grip cap features ratcheting noise so you know it’s properly sealed
|
20.93 |
|