|
RTA-62 Quick Release Bracket
Easily remove your electric steer, bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" and 87" shaft trolling motors.
Features:
Designed to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck
The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
The locking handle can be secured with a padlock (not included) for additional security.
Designed for use in freshwater or saltwater
|
200.50 |
|
|
RTA-55 Quick Release Bracket
Easily remove your electric-steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and specifically designed for higher thrust motors and longer shaft lengths. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck
Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
Locking handle can be secured with padlock (not included) for additional security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
348.70 |
|
|
MKA-42 Quick Release Bracket
For quick, easy removal of your Fortrex or Maxxum bow-mount trolling motor. Extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system. Ultra-tight tolerances eliminate bracket movement and noise. Fits 42" shaft foot control motors, 42" and 52" shaft hand control motors.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.06 |
|
|
MKA-57 Quick Release Bracket
The bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments.
Features:
Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows trolling motors to be quickly removed from and reattached to the boat deck
The dual Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, a lanyard, and a locking pin
Upper and lower plates include slots for securing with a padlock (not included) for added security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
435.86 |
|
|
MKA-56 Quick Release Bracket
Easily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking handle with stainless steel pins can be secured with a padlock (padlock not included, sold separately).
Features:
Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck
Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
Locking handle can be secured with padlock (not included) for additional security
Compatible with electric steer motors featuring QUEST technology
Designed for use in freshwater or saltwater
|
348.70 |
|
|
MKA-64 Quick Release Bracket
Easily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors.
Features:
Designed to meet the increased stress created by high-thrust motors and long shaft lengths
Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck
The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck
Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration
The locking handle can be secured with a padlock (not included) for additional security
Designed for use in freshwater
|
200.50 |
|
|
MKA-51 Quick Release Bracket
The bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware.
Compatible with Ulterra™, Terrova®, PowerDrive™, PowerDrive V2 and DeckHand 40.
Features:
Slide motor inboard 6” for a better boat cover fit and more clearance when launching boat
Allows trolling motor to be quickly removed from and reattached to boat deck
Cam-lock design reduces bracket movement and noise
Includes stainless steel mounting hardware, lanyard, and locking pin
Upper and lower plates include slot for securing with padlock (not included) for added security
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
229.96 |
|
|
Large Offset Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 tapered Phillips machine screws, fender washers, and lock nuts
3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
405.00 |
|
|
20" Straight Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
3/8–16 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
217.50 |
|
|
RTA-17 Composite Quick Release Bracket
Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.
Features:
Allows trolling motor to be quickly removed from and reattached to boat deck
Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck
Composite construction resistant to rust, corrosion, and discoloration
Includes stainless steel mounting hardware and locking pin
Locking handle can be secured with padlock (not included) for additional security
Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP
NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the RTA-54 model.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
77.54 |
|
|
RTA-61 Cable-Steer Quick Release Bracket
For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45" shaft and hand control motors with up to a 52" shaft. They are designed to handle the increased torque of QUEST series motors.
Features:
Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors
Allows trolling motors to be quickly removed from and reattached to the boat deck
Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware
Solid, anodized aluminum construction
Includes both 5/16" and 1/4" stainless steel mounting hardware
Brackets can be secured with a padlock (not included) for additional security
Fits 45" shafts and smaller foot-control motors and 52" shafts and smaller hand-control motors
|
168.97 |
|
|
MKA-16-03 Quick Release Bracket
For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system.
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40.
- Allows trolling motor to be quickly removed from and reattached to boat deck
- Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw
- Solid, anodized aluminum construction
- Includes stainless steel mounting hardware
- Brackets can be secured with padlock (not included) for additional security
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.03 |
|
|
MKA-62 Cable-Steer Quick Release Bracket
For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series motors.
Features:
Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors
Allows trolling motors to be quickly removed from and reattached to the boat deck
Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware
Solid, anodized aluminum construction
Includes both 5/16" and 1/4" stainless steel mounting hardware
Brackets can be secured with a padlock (not included) for additional security
Fits 52" to 72" shaft, foot-control motors, and 62" shaft hand-control motors
|
187.75 |
|
|
Riptide® Saltwater Composite Quick Release Bracket
RTA-19
Allows for easy removal of any Riptide® SM or Riptide SE bow-mount trolling motor
High-yield composite construction is super strong and impervious to corrosion
Low-profile design leaves deck clear when motor is removed
Locking handle with stainless steel pins can be secured with padlock (not included).
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
95.89 |
|
|
MKA-58 Boat Deck Reinforcement Kit
Provides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors.
Features:
Provides additional strength and stability for mounting Minn Kota Quest series trolling motors
Helps to distribute torque loads associated with higher thrust motors
Can be installed directly to the boat deck or in combination with MKA-56 / RTA-55 quick-release bracket
Multiple mounting hole patterns allow for flexible installation
Includes stainless steel hardware
Designed for use in saltwater
Compatible with Ulterra, Terrova, Riptide Terrova, and Riptide Instinct QUEST series trolling motors
|
234.70 |
|