|
StepSafe™ Dock Step - Double Tread - White
Taylor Made StepSafe™ non-slip pad is adhered for additional slip protection while boarding. The 1-1/2" wide flange provides adequate mounting surface for docks.
Features:
Cleans easily with soap and water
Maximum weight is 300lbs
Additional hand rails are available for two and three step models, sold separately
Specifications:
Dimensions (L x W x H): 26.75 x 23.5 x 17 inches
|
182.05 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
BoatGuard® Mooring Whip - 14'
For boats up to 10,000lbs
Taylor Made Products now provides a more economical way to protect your boat in higher wake areas. Designed with the same tough standards as our fixed base and our premium Mooring whips, these new Whips provide the "Safety Zone" between dock and boat for many types of docking applications. Unlike the competition, Taylor uses a large diameter solid Fiberglass pole that withstand rugged environments and provide that Spring Action to keep your boat safely away from the dock. CAD designed Whip Base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.
Note: When determining whip model weight is more important than length. Some docking conditions may be too rugged for this product.
|
626.86 |
|
|
BoatGuard® Mooring Whip - 12'
For boats up to 5,000lbs
Taylor Made Products now provides a more economical way to protect your boat in higher wake areas. Designed with the same tough standards as our fixed base and our premium Mooring whips, these new Whips provide the "Safety Zone" between dock and boat for many types of docking applications. Unlike the competition, Taylor uses a large diameter solid Fiberglass pole that withstand rugged environments and provide that Spring Action to keep your boat safely away from the dock. CAD designed Whip Base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.
Note: When determining whip model weight is more important than length. Some docking conditions may be too rugged for this product.
|
542.34 |
|
|
Stow 'n Fisherman's Go Dock Box - 24" x 95" x 22" - X-Large
An edition to Taylor Made's line of dock boxes comes the ideal fisherman's storage dock box. This box has all the features and benefits of our standard fiberglass dock boxes with the addition of rod holders on the underside of the lid. This added feature is a great way to keep your fishing poles stored and easily out of the way of all your other boating gear. Easily accommodates poles up to 7' long.
|
1220.30 |
|
|
Super Gard™ Inflatable Vinyl Fender 5.5" x 20" - White
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 15' to 20'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
26.33 |
|
|
Super Gard™ 6.5" x 22" Inflatable Vinyl Fender - White
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 20' to 25'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
44.45 |
|
|
Super Gard™ 8.5" x 26" Inflatable Vinyl Fender - White
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 25' to 35'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
76.39 |
|
|
Super Gard™ 5.5" x 20" Inflatable Vinyl Fender - Blue
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 15' to 20'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
26.33 |
|
|
Super Gard™ 6.5" x 22" Inflatable Vinyl Fender - Blue
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 20' to 25'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
44.45 |
|
|
Super Gard™ 8.5" x 26" Inflatable Vinyl Fender - Blue
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 25' to 35'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
76.39 |
|
|
Storm Gard™ 5.5" x 20" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 15' to 20'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
20.83 |
|
|
Storm Gard™ 6.5" x 22" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 20' to 25'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
32.29 |
|
|
Storm Gard™ 8.5" x 27" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 25' to 35'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
62.59 |
|
|
Storm Gard™ 5.5" x 20" Inflatable Vinyl Fender - Mid Atlantic Blue
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 15' to 20'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
20.83 |
|