|
Bilge Pump Sensor for Siren 3
The Wireless Bilge Pump Sensor monitors bilge pump activity, including run time and daily cycles. Attach the Bilge Pump Connector to the bilge pump and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the bilge pump exceeds a preset run time or cycle counts.
Features:
Compatible with Siren 3 Pro only
Includes Wireless Sensor Module and Bilge Pump Connector with 3 feet of wire
|
166.91 |
|
|
High Water Sensor for Siren 3
The Wireless High-Water Sensor detects if there is water in the bilge and sends an alert to the Siren Marine App if water has risen above the preset level. Mount the Water Probe at the desired height in the bilge and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the boat is taking on water.
Features:
Compatible with Siren 3 Pro only
Includes Wireless Sensor Module and Water Probe with 3 feet of wire
|
166.91 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Siren Marine's Connected Boat technology is revolutionizing the boat ownership experience by providing boat owners, fleet operators and boat builders with critical information, peace of mind, and a better boating experience.
Track your boat's position, receive alerts when critical events occur, view live video from the boat, access engine metrics, view NMEA information, and control onboard devices remotely.
Specials Closeouts Remanufactured Rebates
|
|
|
Siren Marine's Connected Boat technology is revolutionizing the boat ownership experience by providing boat owners, fleet operators and boat builders with critical information, peace of mind, and a better boating experience.
Track your boat's position, receive alerts when critical events occur, view live video from the boat, access engine metrics, view NMEA information, and control onboard devices remotely.
Specials Closeouts Remanufactured Rebates
|
|
|
Battery Sensor for Siren 3
Monitor battery voltage with the Wireless Battery Sensor, and never worry about a dead battery again. Attach the Battery Connector to one of the boat’s batteries and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the battery voltage exceeds or drops below a preset level. Ideal for monitoring multiple batteries on a boat.
Features:
Compatible with Siren 3 Pro only
Includes: Wireless Sensor Module and Battery Connector with 3 feet of wire
|
166.91 |
|
|
Entry Sensor for Siren 3
Receive instant notifications if there is unauthorized entry on the boat. Perfect for securing lockers, doors, and hatches. Install the Wireless Module on one side of the door or locker and the Open/Close Magnet on the other side. Link to the Siren 3 Pro and receive alerts when the door or locker is opened or closed.
Features:
Compatible with Siren 3 Pro only
Includes Wireless Sensor Module and Open/Close Magnet
|
166.91 |
|
|
It's Boat Show time at CLR Marine
Save Big on the Extend Your Step and the Extend Your Step Three
Sternperch Sailboat Seats are on Sale add two more Seats to your Sailboats Cockpit
Do you have a problem with your water pump Airlocking, No more, Get a Primetime Pump today, use Coupon Code NoMoreAirlocks
The Best Anchors in the world are from Mantus Marine and all Mantus Marine Equipment is on Sale, enter Coupon Code BuyMantus
Don't forget to check out all of our Specials at CLR Marine
$ave even more Money buy checking out our Rebate Corner
This Sale will end on Oct. 31 2019
|
|
|
Wiring Cable for Siren 3
The Wiring Cable 2 accessory is used to connect additional wired sensor inputs and to also drive additional outputs to your Siren 3 Pro device. Each wire has unique functionality to support the corresponding sensor.
Features:
Compatible with Siren 3 Pro only
Cable length: 3 ft.
Wire length: 6 in.
Direct connection to Siren 3 Pro on bottom-right connector on device
Outputs: 5
Inputs: 7
|
26.20 |
|
|
Temp Sensor for Siren 3
Monitor the temperature of the cabin, engine room, bait locker, or fridge. Place the Wireless Module in the area that needs to be monitored, link the module to the Siren 3 Pro, and receive alerts if the temperature exceeds or drops below a preset level. The optional temperature probe can be used for measuring the temperature of specific equipment (e.g. engine) or hard-to-reach areas of the boat.
Features:
Compatible with Siren 3 Pro only
Includes: Wireless Sensor Module and Temperature Probe with 3 feet of wire
|
166.91 |
|
|
External GPS Antenna for Siren 3 Pro Includes 10' Cable
Optimize GPS tracking of your boat with the External GPS Antenna. When you remotely mount the External GPS Antenna, the Siren 3 Pro will override the use of the internal GPS antenna.
*Compatible with the Siren 3 Pro ONLY
|
59.89 |
|
|
GA200 GPS Sensor for AIS700
The GA200 is an external antenna, suitable for improving the reception of the internal GNSS (GPS / GLONASS) receivers of compatible MFDs, AIS devices, and VHF radios. The GNSS antenna is supplied with a fitted 10 m (33 ft.) cable. The length of the antenna cable can be extended if required. The antenna cable length can be extended by up to 10 m (33 ft.), giving a total maximum cable length of 20 m (66 ft.)
|
154.99 |
|
|
Jabsco Mini Puppy Bilge/Utility 12V
FEATURES
Pump Body:
Brass
Port Size:
25.4mm (1") ID Hose or 3/8" BSP / NPT pipe
Flow:
6 lpm (1.3 UK gpm) output @ 2m (6.6ft) head.
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard).
APPLICATIONS / CHARACTERISTICS
Continuous rated, medium duty pumps for bilge and general purpose use. Small bilge debris present no problem to these brass bodied, flexible impeller pumps. Simple design means fewer wearing parts. Self priming to 1.5m (5 ft).
Jabsco Mini Puppy Bilge/Utility 12V 1.4GPM
|
399.57 |
|
|
Jabsco Mini Puppy 24V Bilge/Utility
FEATURES
Pump Body:
Brass
Port Size:
25.4mm (1") ID Hose or 3/8" BSP / NPT pipe
Flow:
6 lpm (1.3 UK gpm) output @ 2m (6.6ft) head.
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard).
APPLICATIONS / CHARACTERISTICS
Continuous rated, medium duty pumps for bilge and general purpose use. Small bilge debris present no problem to these brass bodied, flexible impeller pumps. Simple design means fewer wearing parts. Self priming to 1.5m (5 ft
Jabsco Mini Puppy Bilge/Utility 24V 1.4GPM
|
399.57 |
|
|
Jabsco 23670 Series Junior Puppy Flexible Impeller Pump
FEATURES
Pump Body:
Bronze
Port Size:
3/8"BSP Threads or 3/4" (19mm) ID Hose.
Flow:
15.5 Litres/min (3.4 USgallons/min)
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
Continuous duty 12V or 24V. Motor meets ISO 8846 MARINE (Ignition protection) and ISO 8849 MARINE (Bilge pump standard).
APPLICATIONS / CHARACTERISTICS
Continuous rated, medium duty flexible impeller pumps for bilge and general purpose use.
Self Priming to 8 feet (2.5m).
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. Use for bilge pumping, livewell circulation, washdown and general pumping requirements
Jabsco Junior Puppy Flexible Impeller Pump 12Volt, 3.4GPM, 3/8" British Standard Pipe Threads or 3/4" Hose Ports, Nitrile Impeller
|
521.94 |
|