|
Party Bumper with White Rope - Black
Protection, versatility and ease of use. FATSAC's Party Bumper is designed to be used as way to protect your boat when anchored against other boats. The perfect solution for those crowded gathering of boats.
Comes with two (2) 5' sections of White Polypropylene rope to attach the Party Bumper to your boat.
Color options available.
Features:
Highest Quality HeyTex layered materials
UV resistant
Includes a tie down cleat on each end, 2 x 5’ foot rope extensions to hang from boat cleats. and a high pressure air valve for filling.
Double welded seams with seam tape for highest quality and strength.
Important – This is for Boat Tie Ups and Docks NOT meant to be used for towing, or to stop a boat at high speeds!
In the Box:
Party bumper
Two (2) sections of 5" White Polypropylene Rope
One Valve/Cap (W774)
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
237.60 |
|
|
Party Bumper with White Rope - Grey
Protection, versatility and ease of use. FATSAC's Party Bumper is designed to be used as way to protect your boat when anchored against other boats. The perfect solution for those crowded gathering of boats.
Comes with two (2) 5' sections of White Polypropylene rope to attach the Party Bumper to your boat.
Color options available.
Features:
Highest Quality HeyTex layered materials
UV resistant
Includes a tie down cleat on each end, 2 x 5’ foot rope extensions to hang from boat cleats. and a high pressure air valve for filling.
Double welded seams with seam tape for highest quality and strength.
Important – This is for Boat Tie Ups and Docks NOT meant to be used for towing, or to stop a boat at high speeds!
In the Box:
Party bumper
Two (2) sections of 5" White Polypropylene Rope
One Valve/Cap (W774)
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
237.60 |
|
|
Amp 1L w/ White Cone - Black
The tiny Amp 1L packs an impressive spot beam.
Waterproof to 100M (330ft) and equipped with a large carabiner loop, this handheld light is ready for any conditions and easy to clip onto gear. The Amp 1L comes with a snap on translucent cone to turn it into a marker light, hanging lantern or area light.
When you are done exploring, the Amp 1L will still be your favorite piece of gear with its built-in bottle opener.
Features:
Built in Bottle Opener
Large Carabiner Loop
Removable Cone
Specifications:
Power - 100 Lumens
Lamp - 1 Maxbright LED
Burn Time - 7.4 Hours
Batteries - 2 AAA Alkaline (Included)
Weight - 2oz or 57g
Water Resistant - IPX8
Modes - Spot High
Warranty - Lifetime
*Sold as an Individual
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.07 |
|
|
360-Series 4" LED Off-Road Spot Beam with White Backlight - Black Housing
The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market.
RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application.
Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night.
Harness sold separately.
Features:
Patented Optics
50,000 Hr+ LED Lifespan
9-36 VDC
Black Exposed Printed Circuit Board
Back-Lighting Independently Controlled
Alloy Housing & Heatsink
Dedicated Wire to Run Back-Lighting without Primary LEDs
Pressure Equalizing Vent
|
309.00 |
|
|
360-Series 4" LED Off-Road Fog Light Drive Beam with White Backlight - Black Housing
The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market.
RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application.
Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night.
Harness sold separately.
Features:
Patented Optics
50,000 Hr+ LED Lifespan
9-36 VDC
Black Exposed Printed Circuit Board
Back-Lighting Independently Controlled
Alloy Housing & Heatsink
Dedicated Wire to Run Back-Lighting without Primary LEDs
Pressure Equalizing Vent
|
309.00 |
|
|
360-Series 4" LED Off-Road Fog Light Diffused Beam with White Backlight - Black Housing
The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market.
RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application.
Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night.
Harness sold separately.
Features:
Patented Optics
50,000 Hr+ LED Lifespan
9-36 VDC
Black Exposed Printed Circuit Board
Back-Lighting Independently Controlled
Alloy Housing & Heatsink
Dedicated Wire to Run Back-Lighting without Primary LEDs
Pressure Equalizing Vent
|
288.40 |
|
|
360-Series 6" LED Off-Road Fog Light Spot Beam with White Backlight - Black Housing
The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market.
RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application.
Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night.
Harness sold separately.
Features:
Patented Optics
50,000 Hr+ LED Lifespan
9-36 VDC
Black Exposed Printed Circuit Board
Back-Lighting Independently Controlled
Alloy Housing & Heatsink
Dedicated Wire to Run Back-Lighting without Primary LEDs
Pressure Equalizing Vent
|
478.94 |
|
|
360-Series 6" LED Off-Road Fog Light Drive Beam with White Backlight - Black Housing
The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market.
RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application.
Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night.
Harness sold separately.
Features:
Patented Optics
50,000 Hr+ LED Lifespan
9-36 VDC
Black Exposed Printed Circuit Board
Back-Lighting Independently Controlled
Alloy Housing & Heatsink
Dedicated Wire to Run Back-Lighting without Primary LEDs
Pressure Equalizing Vent
|
478.94 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Dock Edge Torpedo Bumper 18" White
These large, durable bumpers add an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from the same Quality material as our Dolphin fenders, each weighs a rugged 2.7 lb. and measures 18" tall with a diameter of 5". Place them on dock leg pipes over the mounting brackets to prevent damaging your watercraft from protruding bolts.
Product Specifications:
Part No.: 91-110-F
Description: Torpedo Bumper, 18", PVC, White
Weight: 3.5 lbs.
Packaging Dimensions: 18 x 6 x 6 inches
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
26.32 |
|
|
Dock Bumper Corner Dock Guard - Black
The black roto-molded bumper is fabricated from soft vinyl with UV inhibitors and Fungicides and has angled ends to deflect Craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.
|
18.38 |
|
|
PULL with Rope - Black
Snubber PULL is a comfortable handling strap for a rowboat or any small vessel. Securely attach the rope in a few seconds. Use the handling strap also to ease the docking of a larger vessel. The loop can be wrapped around a boat railing or a cleat in seconds, allowing you to pull or stabilize the boat. If you want to extend a pulling rope’s length, Snubber PULL can be tied to any other rope. Snubber PULL is also a handy tool for other uses, such as lifting heavy bags.
Features:
Elastic material allows a firm grip
Does not leave marks or clunk around the boat
Finnish quality product – Designed and manufactured in Finland
Quick simple attachment
Securely attach the rope in a few seconds
The loop can be wrapped around a boat railing or a cleat in seconds
Applications:
A firm grip ease the docking of a vessel
Lifting heavy bags & material
Suitable for docking small boats such as row boats and jet skis
Ease the docking of larger vessels
Specifications:
The loop is made out of high quality 10mm Robline polyester rope
Full length: (inch) 51 / (cm) 130
*Sold as an Individual
|
21.34 |
|
|
Maxillume h60 - Trunnion Mount Flood Light - White Dimming - Black Housing
Customers with high expectations, from the world's top custom yacht builders to the US Coast Guard, have relied on Lumitec's Maxillume line of flood lights for nearly a decade. Packing more than 6,000 TRUE lumens+, the Maxillume h60 boasts twice the output of previous models, mounting options and our tried and tested internal dimmer control. Each light is designed, hand assembled, and tested at our USA manufacturing facility.
Specifications:
Lumens (White): 6000
Voltage: 10-30V DC
12V DC Amps: 5A
24V DC Amps: 2.5A
Rated Watts: 60
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): No
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: N/A
Width: 8.3in (21.08cm)
Depth: 2.6in (6.6cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
423.59 |
|
|
Kite Block - Black w/White Sheave
Features:
Lightweight durable construction
Economical
Maintenance free
Applications:
Vang, cunningham and trapeze retriever systems on dinghies
Leech line tackles, bunk adjusters etc on larger yachts
Materials:
U.V. stabilized Acetal sheaves
Nylon cheeks
Specifications:
Sheave Ø:16mm(5/8")
Max. Rope Ø:4mm(5/32")
|
11.30 |
|
|
Radiance+ 40" Curved White Backlight Black Housing
RIGID Radiance Plus light bar is the perfect solution for those who want RIGID’s legendary quality at a level everyone can attain. Featuring RIGID’s improved LED technology, the Radiance Plus light bars deliver up to 35% more raw lumens than before. The RIGID Radiance Plus bars are built with the same high-grade aluminum alloy housing as our legendary E-Series bars, but that’s where the visual similarities end. Inside, the Radiance Plus bars are feature-packed, with a black exposed circuit board, optimized forward projecting Broad Spot optics that combine the attributes of a spot and flood beam pattern.
Further, the Radiance Plus bars have built-in back-lighting available in white, amber, red, blue and green. Large back-lit and recently updated RIGID branding plates further add to the unique look of the Radiance light bar. Even better, the Radiance Plus light bars now include a wiring harness and multi-trigger switch for a quick and painless installation. The RIGID Radiance Plus light bar is for the customer who wants a truly custom look that only RIGID can provide.
Features:
Independently Controlled Back-Lighting Available in White, Amber, Red, Blue, or Green
Dedicated Wire to Run Back-Lighting without Primary LEDs
Black Exposed Circuit Board
E-Series Construction & Durability
Black Powder Coated Mounting Brackets
50,000+ Hour Lifespan
10-15 VDC
Impact Resistant Polycarbonate Lens
Integrated Thermal Management System
In the Box:
Mounting Hardware
Black Powder Coated, L-Shape Brackets
Open Leads, No Connector
2ft Wire Extension (20” - 50”)
Complete Multi-Switch Wiring Harness (PN 40200)
∗ Sold as an Individual
|
962.99 |
|