|
Shakespeare Style 408-R
UPPER BRACKET WHITE MOLDED PLASTIC
Insulated stand-off bracket of white molded plastic. Corrosion resistant. Easy-open for quick laydown.
For use with Styles 81-S and 407 Swivel Mounts and antennas of 1" (using insert provided) or
1-1/2" diameter. Now includes a new 1-1/8" insert!
|
18.95 |
|
|
Shakespeare Style 410-R Mounting Kit
Combines the Style 91 Swivel Mount with the Shakespeare Style 408-R Insulated Stand-off Bracket. The molded upper bracket features an insert to accept 1" or 1-1/2; diameter antennas or extension masts. Includes an 1-1/8" insert. The swivel mount is stainless steel construction.
|
86.14 |
|
|
Stand-Off Flip-Up Polyethylene Roto Molded 4-Step Dock Ladder - Grey
Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. The Stand Off roto-molded ladder extends into the water at a 60 degree angle to make getting out of the water easier. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicides.
Rail Height: 20-1/2" above the dock
Distance to first step: From dock surface, 12-1/2" & 10-1/2" between steps
Steps: Are 6-1/2" deep and 14" wide
Capacity: 500lb (227 kg)
|
261.54 |
|
|
8' Pole Kit
Seaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal.
Features:
Fixed Top Plate - A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronic.
Rail Stand-off Kit - The rail stand-off kit includes two turnbuckle style struts that are adjustable from 6" to 12", two stainless steel 3" pole clamps and two stainless steel 1" rail clamps.
Adjustable Base - A hard anodized adjustable base with a water tight Cable Seal. The adjustable base measures 5-1/4" x 3".
**NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES***
|
1617.60 |
|
|
Stand-Off Mount Rod Holder
Features:
White
UV-Stabilized Polyethylene
Front Access Hole & Integrated Stand-Offs for Easy Mounting
Stainless Hardware Not Included
|
4.50 |
|
|
Stand-Off Mount Rod Holder
Features:
White
UV-Stabilized Polyethylene
Front Access Hole & Integrated Stand-Offs for Easy Mounting
Stainless Hardware Included
|
12.46 |
|
|
8' Pole Kit
Seaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal.
Features:
Fixed Top Plate - A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronic.
One 48" Support Strut Kit
1" rail stand-off kit
Adjustable Base - A hard anodized adjustable base with a water tight Cable Seal. The adjustable base measures 5-1/4" x 3".
*Does NOT fit 24" JRC, Lowrance 2400 HD and Simrad DX64S
**NON STOCK ITEM DROP SHIPS FROM MANUF. NO PROMO FREIGHT RATES***
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1924.80 |
|
|
Navy Standard Compass - Bracket Mount - Black
Navy Standard compasses are professional compasses intended for coastal or worldwide naviagtion. The NS-7.5 has a bracket mount for ship's steering or reference compass. Comes with 12V, 24V/32V, and 110V lights included. The compass dial system features a 7-1/2" (192mm) dial with one degree graduations and cardinal and inner cardinal markings. The dial float chamber removes nearly all the weight from the pivot and jewel. The bezel is machined to accommodate Navy Standard azimuth or bearing circles. The compass meets or exceeds Solas ISO Class A compass requirements.
Features:
Dial 7.5" (192mm)
1 degree increments with cardinal and inner cardinal markings
Dial float chamber removes nearly all the weight from pivot and jewelto extend operation by years
Bezel machined to accommodate 7.5" Navy standard azimuth circle orbearing circle
Meets or exceeds Solas ISO Class A compass requirements
Operating Temperature Range: -22°F (-30°C) to +175°F(+80°C)
12, 24, 32 VDC and 110 VAC lighting included
100% Repairable
Exclusive 5-Year Ritchie Warranty
Width: 12-1/2"
Depth: 11-3/4"
Height: 9-3/8"
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2196.42 |
|
|
Shakespeare Style 81-S Stainless Steel Swivel Mount
Shakespeare's Style 81-S Swivel Mount is a dual-joint, free-pivoting base mount for use with an appropriate Shakespeare upper bracket in deck or side mounting large or small antennas. The mount's versatile action fits almost any mounting location, and permits easy lowering of the antenna for clearing overhead obstruction. It requires a stand-off upper bracket.
The Style 81-S Swivel Mount is included in the Style 410-R Mounting Kit.
Stainless steel construction
Standard 1" - 14 threads
|
64.79 |
|
|
6018-R Phase III VHF Antenna - 17′ 6″ (5.3M) VHF Marine Band 9dB Gain
Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, foam-filled fiberglass radome for stability in high seas, high winds and high speeds.
Features:
Silver-plated outer conductor, copper inner conductor
• Stainless steel mounting sleeve
• Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage
• Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit
• Two sections: Base 110″, Tip 110″
Specifications:
Design: Collinear-phased 1/2-wave elements with choking sleeve
Height: 18' (5.48m)
Weight: 20lbs (9kg)
Gain: 8dB
Connector Type: SO-239
Suggested Mounting: 409-R or 410-R
Impedance: 50 ohms
Max Input Power: 150W
DC Grounding: No
Shakespeare Limited Warranty: 8 years
|
797.74 |
|
|
5309-R 23' Galaxy VHF Antenna - 9dB Gain
THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS
This design invokes all the antenna engineers tricks to produce the clearest possible transmission and reception over the longest range.
Features:
Phased 1/2 wave elements in collinear array with a band spread matching sleeve and a choking stub to suppress cable radiation
Brass and copper elements
Stainless steel ferrule with standard 1"-14 thread
Includes 20' RG-8/X cable and a PL-259 connector
Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit (pictured mount not included)
Two sections: Base 172", Tip 105"
Twin to: Galaxy Style 5310-A HF/SSB
Shakespeare Limited Warranty: 5 years
Includes FME Cables
Technical Specifications:
Frequency: VHF Marine Band
Bandwidth: 5 MHz within 2.0:1 VSWR
SWR: Nominally 1.5:1 at 156.8 MHz
Gain: 9 dB
Max Input (Watts): 150 watts
DC Ground: NO
Height (feet): 23'
Polarization: Vertical
|
726.34 |
|
|
6235-R Phase III AM/FM 8' Antenna w/20' Cable
Shakespeare's master craftsmen take AM/FM reception to new heights with this hand soldered, hand assembled and hand finished AM/FM antenna. The quality build of this 8’ antenna ensure high performance and durability. The high-gloss polyurethane finish protects the fiberglass from yellowing under UV rays, providing a lasting look of beauty for years to come.
Specifications:
Height: 8’ (2.43m)- Reduced Length
Weight: 9lbs (4kg)
Connector Type: N-Connector
Suggested Mounting: 4187-HD
Boat Length: All
Impedance: 93 ohm
Shakespeare Limited Warranty: 8 years
|
276.48 |
|
|
TV1 & LTE-1 Mounting Bracket
You can mount the antenna with any standard stainless antenna mount available from your local marine equipment supplier! Use this bracket with a standard threaded steel mount (1"-14 threads) to make the TracVision TV1 or M1 a drop-in replacement for a Shakespeare SeaWatch or Glomex off-air antenna. Just thread the mounting nut and mounting bracket onto the antenna mount, then screw the antenna to the mounting bracket - that's all there is to it!
|
155.11 |
|
|
8' Starlink Mast Pole Kit with Standoff Kit
Seaview offers an 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with an adjustable base that has a small 5-1/4" x 3" footprint and a water-tight Cable Seal, which can be easily disassembled for pole removal.
The pole itself is 3" in diameter and is made from marine-grade aluminum. Seaview takes the finish to another level by first taking the raw aluminum and putting it through a process called Chem Film. Chem Film is a chemical conversion coating that is used as a light coat of protective covering over aluminum. After the Chem Film process, it is taken through a 3-part epoxy prime and powder coat. This is all done to ensure the best possible finish and corrosion resistance.
Fixed Top Plate
A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “Swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. An anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
Supports
Several strut supports depending on which Seaview Pole Kit you choose. A rail stand-off kit and a 48" long strut.
Rail Stand-off Kit - The rail stand-off kit includes two turnbuckle style struts that are adjustable from 6" to 12", two stainless steel 3" pole clamps, and two stainless steel 1" rail clamps.
48" Struts - Also made from highly polished stainless steel are the 48" long struts.
Adjustable Base
A hard anodized adjustable base with a water-tight Cable Seal. The adjustable base measures 5-1/4" x 3".
|
1617.60 |
|
|
Roller Bunk Mounting Bracket - 11"
Perfect for use under roller bunks when the bunks need to be raised up off the frame. Adjustable 11 ga top swivel bracket allows bunks to tilt to the shape of the hull.
Features:
11” tall
1/2” swivel bolt included
7/16” hole for mounting to roller bunks
|
15.70 |
|