|
4G Connect 2G/3G/4G Internet Access
4G Connect is a new 2G/3G/4G (LTE) internet access solution for use afloat. It utilises the latest MIMO technology with dual Antennas for fast, long range access and incorporates a full function wifi router so multiple devices can connect wirelessly. There is also a wired LAN port and WAN port – for connection to high power wifi devices or satellite modems.
The Standard model has built in Antennas which are fine on most fibreglass (GRP) hulled boats and will provide good performance when in port and close to shore. For carbon fiber, wooden or metal hulled vessels, or for boat owners that want the maximum possible range, we would recommend our 4GConnect Pro model with external high gain antennas.
4G Connect has an easy to use interface and it is SIM unlocked so users are free to use any cellular provider they choose. Users in Europe are recommended to utilize a Vodafone SIM as this provides excellent maritime performance.
Operation is simple – turn on, connect to the password protected wifi hotspot that 4G Connect creates and your device is online. Digital Yacht’s WL510 high power wifi solution can also be connected to the WAN port for a choice between hotspot wifi and 4G connectivity. iKommunicate can also connect to the LAN port providing boat NMEA data on the wifi network for use with navigation apps.
Features:
Hi performance 4G/LTE modem for exceptional speed and range with fall back to 2G/3G
SIM unlocked for any network provider • Internal Antenna solution with MIMO technology
LTE Class 3 modem offers long range and up to 70Mbps speeds
Wifi interface for tablets and phones
Offers good performance in port on GRP boats
Ethernet LAN port for connection to iKommunicate navigation interface – allows boat NMEA 0183/2000 data to be available on the wifi network – ideal for smartphone and tablet navigation
Ethernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE/WiFi hotspot solution
12V DC operation with <5W power consumption
Easy installation
Easily upgradable to PRO with purchase of external Antennas and cabling
Dimensions:
380mm x 125mm x 55mm (L x W x H)
Supplied With:
1m power cable
Modem/router
2 Internal Antennas
|
503.95 |
|
|
4G Connect Pro 2G/3G/4G Dual Antenna
Digital Yacht's 4G Connect is a 2G/3G/4G (LTE) internet access solution for use afloat. It utilizes the latest MIMO technology with dual antennas for fast, long-range access and incorporates a full-function wifi router so multiple devices can connect wirelessly. There is also a wired LAN port and WAN port – for connection to high-power wifi devices or satellite modems.
The Pro model ships with two external hi-gain antennas for exceptional long-range performance and is the recommended solution for use afloat.
4G Connect has an easy-to-use interface. It is SIM unlocked so users are free to use any cellular provider they choose.
Operation is simple – turn on, connect to the password-protected wifi hotspot that 4G Connect creates and your device is online. Digital Yacht’s WL510 high-power wifi solution can also be connected to the WAN port for a choice between hotspot wifi and 4G connectivity. iKommunicate can also connect to the LAN port providing boat NMEA data on the wifi network for use with navigation apps.
Features:
Hi-performance 4G/LTE modem for exceptional speed and range with fall back to 2G/3G
SIM unlocked for any network provider
Supplied with 2 x high performance external 48cm antennas for optimum speed and range
7m low loss LMR 200 cable kit included
Supplied with deck base for antennas (as shown)
LTE Class 3 modem offers long range and up to 70Mbps speeds
The recommended solution for offshore use and non-GRP vessels
Wifi interface for tablets and phones
Ethernet LAN port for connection to iKommunicate navigation interface – allows boat NMEA 0183/2000 data to be available on the wifi network – ideal for smartphone and tablet navigation
Ethernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE/WiFi hotspot solution
12V DC operation with <5W power consumption
Optional 1” base adaptor available for antennas
Optional 10 & 20m LMR400 assemblies
Supplied With:
7M Cable Kit
|
789.55 |
|
|
LANLink NMEA 0183 To Ethernet Gateway
More and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.
LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.
It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.
Features:
NMEA 0183 to ethernet gateway version
12/24v DC low power operation
Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection
The web user interface for easy setup from the connected device via the browser
TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP
Bi-Directional
The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS
RS232 port for PC apps too
Status indicators for power, data in-out, network link, and server status
Set-Up:
Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup
Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port
Set up with fixed or dynamic IP address
Status page for system diagnostics
Specifications:
Power: 10-35V DC (Consumption approx. 50mA at 12V DC)
Network Port: Ethernet RJ45 10/100MB
IP Mode: Static or DHCP
Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation
NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183)
NMEA 2000 option via iKonvertgateway
Operating temp: -25 to +70 degrees C
LED Indicators: Power -Status -Link -Data In -Data Out
Options: RS232 connectivity (non-concurrent with NMEA)
Dimensions (W x H): 95mm x 86mm
|
193.15 |
|
|
LANLink NMEA 2000 To Ethernet Gateway
More and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.
LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.
It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.
*This version ships with an iKonvertNMEA Certified gateway
Features:
NMEA 2000 to ethernet gateway version
The NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options)
12/24v DC low power operation
Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection
Web user interface for easy setup from the connected device via browser
TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP
Bi-Directional
The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS
RS232 port for PC apps too
Status indicators for power, data in-out, network link, and server status
Set-Up:
Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup
Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port
Set up with fixed or dynamic IP address
Status page for system diagnostics
Specifications:
Power: 10-35V DC (Consumption approx. 50mA at 12V DC)
Network Port: Ethernet RJ45 10/100MB
IP Mode: Static or DHCP
Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation
NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183)
NMEA 2000 option via iKonvertgateway
Operating temp: -25 to +70 degrees C
LED Indicators: Power -Status -Link -Data In -Data Out
Options: RS232 connectivity (non-concurrent with NMEA)
Dimensions (W x H): 95mm x 86mm
|
293.95 |
|
|
4G Xtream Internet & NMEA 2000 Solution
Digital Yacht's 4G Xtream is the latest, premium LTE (cellular) Internet access product. It ships as a complete package with dual external antennas, deck mounting hardware, and cabling. Alternative antenna mounts are available as options.
Using MIMO technology and two external wideband LTE antennas, it offers fast connectivity at up to 300 MBs (network dependent). It has a built-in dual-band wifi router supporting multiple connections, dual SIM slots (with auto-failover if required), built-in GPS (for IOT and tracking applications) as well as an NMEA 2000 interface for navigation and instrument data connectivity and wireless interfacing. There’s also a Bluetooth interface for future connectivity applications.
Features:
Latest Cat 6 LTE MIMO technology with a range up to 25NM offshore (network dependent)
Dual SIM slots with auto-failover or manual selection
Two external, high gain, wide bandwidth antennas
Dual-band integrated wifi router (2.4 & 5 GHz) –independently configurable
Built-in NMEA 2000 interface to transmit NMEA 2000 data over the wireless and wired network to compatible apps
Built-in GPS with external patch antenna for IOT and tracking applications
Built-in Bluetooth with antenna for future applications
3 x LAN ports
1 x WAN port for additional internet connectivity –eg: WL510 high power wifi system
Digital input/output connectivity for IOT/control applications (Available Q4 2021)
SMS addressable
|
1295.99 |
|
|
5G Xtream System with 3 Antennas & 7M Cable
For boat owners looking for ultra-fast internet on board, the new 5G Xtream from Digital Yacht offers 4G and 5G connectivity as well as integration with Starlink satellite systems for the best and most affordable blended internet afloat.
The 5G Xtream can support 5G (shoreside) connection speeds up to 3.1GB/s but also integrates a 4G Cat 20 modem, which offers connectivity up to about 25NM from shore at speeds of up to 2GB/s. The system uses three external antennas with dual high-gain vertical antennas and a separate compact dome for the higher 5G frequencies. This MIMO technology and, critically, separate antennas give optimum performance. There’s support for dual SIMs with auto (failover) or manual switching between operators.
The 5G Xtream features dual-band (2.4 and 5GHz) wireless connections, so users on board simply search for the secure wifi point and connect. There are also 4 LAN ports (10/100/1000 MB) for wired devices like smart TVs and a WAN port that is optimized for Starlink satellite connectivity, allowing the 5GX to act as a sophisticated and fast router for all on-board internet communications.
The Wi-Fi router can also be configured to access marina wifi hotspots as an additional method of internet access. This also supports the very latest 5GHz marina wifi services, and there's also a high-gain external wifi antenna available as an accessory.
For advanced users, the 5G Xtream allows for user management, VPNs, blacklists, and IOT applications. NMEA 0183/2000 data can also be connected using Digital Yacht’s LANLink devices. The integrated GPS allows for SMS reporting of boat position or even a geofence/drift setting when the boat is at anchor or in port.
The Digital Yacht 5G Xtream is supplied as a complete solution with antennas, mounts, and cabling – all that’s additionally required is a cellular SIM.
Configuration
Configuration is very simple. Just insert the SIM cards. The 5G Xtream has two standard SIM slots, and it is possible to fit two SIMs from two different network operators. By default, the 5G Xtream will query the SIM that is installed and automatically select the APN settings from its internal database.
However, it is very important that users “lockdown” their wireless network with their network name (SSID) and wireless password. This task only takes a couple of minutes and is done via the 5G Xtream web interface.
User Interface
Accessing 5G Xtream functionality is done via an easy web interface. Any locally connected device can simply enter the IP address into the password-protected interface to set up functions, view traffic and logs, and configure wifi.
Once set up, there should be no requirement to log in other than for diagnostics and configuration. Users simply access the internet through the wifi connection, just as they would in the home or office.
Features:
Ultra-fast 5G internet afloat solution with speeds up to 3.1GBs plus also integrates the latest 4G Cat 20 LTE MIMO technology with a range up to 25NM offshore (network dependent) and 4G connection speeds up to 2GBs
Dual SIM slots with auto-failover or manual selection
Two external, high-gain, wide-bandwidth antennas plus a compact high-gain dome antenna for higher 5G frequencies
Dual-band integrated wifi router (2.4 & 5 GHz)—independently configurable
Built-in GPS with an external patch antenna for IOT and tracking/anchor alarm applications
4 x LAN ports
1 x WAN port for additional internet connectivity, optimized for Starlink satellite systems
Digital input/output connectivity for IoT/control applications
SMS capability
12/24v
Weight: 3800 g
Dimensions: 180 x 125 x 55 mm
operation
Specifications:
Operating Temperature: -40 to +75 degrees C
Dimensions: 180 x 125 x 55mm (excluding antennas)
Weight: 3,8 kg
Protection: IPX4
Technology: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s
5G/LTE: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s
3G/4G Fallback (Support bands): 5G (NSA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77; 5G (SA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78; 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32; 4G (LTE-TDD): B38, B40, B41, B42, B43
4G & 5G Antennas: Dual Wi-Fi band independent 2.4 & 5 GHz (maximum 150 connections); dual 48cm external wideband high gain MIMO supplied with 7-meter cables and mounting bases. (10 & 20m options available) PLUS additional 100mm dome antenna for 4 x 4 MIMO operation and optimized for 5G (7m cable only)
Interfaces: 4 x LAN 10/100 Ethernet Port; 1 x WAN 10/100 Ethernet Port ; WiFi; 802.11 b/g/n/ac
What’s in the Box?
1 x 5G Xtream Modem Unit
1 x DC Power/IO cable
2 x External antennas
2 x E179F antenna bases
2 x 7m LMR200 antenna cables (N male to N male)
1 x 5G dual element dome antenna with pole/1” adaptor mount and integrated 7m cables
2 x Internal wifi antennas
1 x Internal GPS antenna
Options (sold separately):
1” antenna adaptors and range of mounts
10 & 20m LMR400 antenna cable packs for 4G antennas
AC 110/220v power adaptor
4GXWL hi power external wifi option
LANLink NMEA 0183/2000 interface
|
2065.50 |
|
|
DIGITAL YACHT - NEW PRODUCT ALERT!
Digital Yacht has introduced the GPS160, high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.
TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure and more.
NEW! Galileo GNSS
The GPS160 supports GPS, Glonass and Galileo positioning. TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.
MOB Features:
-GPS160 accepts an external switch inpu to activate internal MOB function
-Position is automatically saved and GPS160 calculates and outpus a "synthetic" AIS MOB NMEA sentence allowing compatible plotters to mark the MOB position automatically - just as if an AIS SART had been activated
-Easily installed with a simple push button switch or for connection to outboard kill switch and tether
-Can also function with 3rd party wireless MOB systems with any switched alarm output
Digital Yacht is all about next generation navigation, communication and entertainment systems for your boat. Boating should be fun, safe and easy and Digital Yacht products integrate into existing and new boat networks to bring a powerful dimension to your onboard electronics.
Specials Closeouts Remanufactured Rebates
|
|
|
Wi-Fi Booster for 4GXtream
4GXtream is the latest, premium LTE (cellular) internet access onboard product with an NMEA 2000 interface. It ships as a complete package with dual external antennas, deck mounting hardware, and cabling. Alternative antenna mounts are available as options.
Using MIMO technology and two external wide band LTE antennas, it offers fast connectivity at up to 300 MBs (network dependent). It has a built-in dual band wifi router supporting multiple connections, dual SIM slots (with auto fail-over if required), built-in GPS (for IOT and tracking applications) as well as an NMEA 2000 interface for navigation and instrument data connectivity and wireless interfacing. There’s also a Bluetooth interface for future connectivity applications.
It will sit alongside our existing 4G Connect Pro as a premium product and is ideal for use on large yachts, workboats, tugs, and commercial ships where reliable, low-cost coastal internet and in-port connectivity are required. 4GXtream features independent dual band (2.4 & 5GHz) wifi for interconnection to mobile devices. This also provides the connectivity for NMEA data so apps on mobile devices can utilize the boat's navigation and instrumentation data.
For external hi-power wifi (to access shoreside hotspots) our booster WiFi kit is recommended which connects to the WAN port. 4GXtream can then act as a router for this connection and allow the user to switch from wifi to LTE.
Features:
Latest Cat 6 LTE MIMO technology with a range of up to 25NM offshore (network dependent)
Dual SIM slots with auto fail-over or manual selection
Two external, high gain, wide bandwidth antennas
Dual-band integrated wifi router (2.4 & 5 GHz) – independently configurable
Built in NMEA 2000 interface to transmit NMEA 2000 data over the wireless and wired network to compatible apps
Built in GPS with external patch antenna for IOT and tracking applications
Built in Bluetooth with antenna for future applications
3 x LAN ports
1 x WAN port for additional internet connectivity – eg: WL510 high power wifi system
Digital input/output connectivity for IOT/control applications (Available Q3 2021)
SMS addressable
|
419.95 |
|
|
Super Halo Cell Booster - AT&T, T-Mobile, Verizon - 2G,3G & 4G
The Super HALO is a marine grade 2G, 3G and 4G voice and data cellular reception solution. Its 5-band compatibility makes it compatible with AT&T, T-Mobile and Verizon networks. The Super HALO is optimized to boost cellular reception for your boat, car, recreational vehicle, home or AnyWhere® else, with support of 10+ users simultaneously and an indoor antenna to direct the signal where you really need it.
Features:
Five band - Works with AT&T, T-Mobile and Verizon 2G, 3G, & 4G networks
Stealth technology - Uplink becomes dormant while not in use to save power
Automatic gain control (AGC) - Does not overpower or interfere the cell sites
Automatic shutdown - Energy efficient and does not interfere with the cell sites
Manually adjustable gain - Flexibility in antenna placement and fine-tuning the system
High quality metal construction - Durable and resilient
FCC certified - Safe and legal
Specifications
Frequency- Uplink (Downlink) MHz
698-716 (728-746) / 776-787 (746-757) / 824-849 (869-894) / 1850-1915 (1930-1995) / 1710-1755 (2110-2155)
Input / Output Impedance
50ohm
Maximum Gain
50dB
VSWR
≤ 2.0
Standard Supported
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
Throughput
100+ Mbps
Noise Figure
5dB
Connectors
FME Male (both ends)
Power Supply / Consumption
5-15VDC, 2.1A Max. @ 12 VDC
Dimensions
7-7/8 in x 5 in x 1-3/16 in (20cm x 12.7cm x 8.09cm)
Weight
2lbs 3oz (1.04kg)
RoHS Compliant
Yes
FCC ID (USA)
RSNMOBILE5
|
1143.96 |
|
|
NavAlert NMEA Monitor & Alarm System
NavAlert is Digital Yacht’s latest innovation and allows an alarm to be set for any parameter that’s available on the boat’s NMEA 2000 network. That could be navigation data such as depth, heading, or speed, as well as electrical data such as voltage and engine/generator data including temperature, pressure, tank levels, fuel flow, etc.
It connects anywhere on the NMEA 2000 network and takes power from this connection, so installation is super simple. A local WiFi network is created by NavAlert, so setup is possible via any smartphone, tablet, or PC. Simply choose the parameter to monitor and set an alarm level.
Alarms/Alerts
Integrated into NavAlert is a custom alarm for anchor drift using an algorithm to calculate the optimum drift radius based on depth and the scope of the chain for reliable notifications. There’s also an anti-collision alarm based on CPA (closest point of approach) and TCPA (time to the closest point of approach) AIS data from a connected AIS. These alerts can also be monitored through the wireless interface with attractive graphical displays of current status.
Alarms can also generate an SMS message, which can be relayed through Digital Yacht’s 4GXtream internet connectivity solution, allowing remote monitoring, which is great for feeling secure that the anchor is holding well when enjoying a lunch ashore. Alarms are independent of any alarms set on a plotter, allowing NavAlert to operate even without a primary multi-function display being powered up (an important feature for power-limited sailboats).
Alerts can also be relayed to compatible multi-function devices (Garmin supports this function) for a pop-up data window indicating an alert and the ability to acknowledge it.
*NavAlert is universal, using the industry standard NMEA 2000 data protocol, so it will integrate with all leading brands and systems.
Operation
The operation is simple. Simply search for the WiFi network that NavAlert creates and connect via a smartphone or tablet. Open a browser and connect to NavAlert, and users are presented with a clear graphical interface allowing easy setup, configuration, and viewing of the alerts and network data. NavAlert constantly monitors the whole network, so alert parameters can be set for any variable.
Users can configure the NavAlert through its simple web interface. Just open a web browser, enter the NavAlert’s IP address, and users can change the network name and password, or even merge the WiFi to an existing WiFi network on board… So no complicated programming software or app is required.
Features:
Multiple parameters can be monitored
Specifications:
Universal NMEA 2000 alarm and monitoring solution
Set a configurable audio and visual alarm for any parameter on the NMEA 2000 network – for instance: shallow depth, low fuel level, off course, engine temp, tank levels, low voltage, etc
Relay the alert via the NMEA 2000 bus to a Garmin multi-function display to deliver a popup alarm window
SMS alerting through Digital Yacht’s 4G Xtream system to a mobile – ideal for remote monitoring of the boat.
Built-in unique anchor drift alarm
Built-in AIS collision avoidance alarm
What’s In the Box:
1m NMEA2000 drop cable
WiFi antenna built-in
|
302.35 |
|
|
AISnet AIS Base Station
AISnet is a new AIS receiver for use as an AIS base station at home or in the office. Utilising the same high performance dual channel AIS receiver as the rest of the Digital Yacht range, AISnet also features an ethernet socket so that you can connect it to your broadband router and send AIS data to an on-line AIS tracking service.
There are now a large number of internet based web sites which offer a view of AIS equipped vessels on a background chart allowing users to check the position and identity of ships and yachts. If your home/office is close to the coast and you would like to contribute your data to one of these sites, simply register with the company and they will give you an IP address and Port number.
Using the setup program that Digital Yacht supply, it takes seconds to program the IP address and Port in to AISnet, which will immediately start sending your local AIS data seamlessly across the internet to be displayed on the site.
It is also possible to view the data, that AISnet is collecting, locally on your PC using the free SmarterTrack Lite software that Digital Yacht include with every AISnet. Simply plug the USB connector into your PC and the AIS data will appear on your PC and still be transmitted over the internet.
AISnet is supplied with a universal UK/Euro/US mains adaptor that provides a regulated 12v supply from 240v/110v AC mains.
KEY FEATURES
AIS base station for Home of Office use
Integrated ethernet network controller for supplying AIS data to online AIS websites
High performance dual channel AIS receiver
Simple configuration via free setup program
USB Interface for simple Plug and Play connection to a PC
Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter
Universal Mains power supply included
Simple "fit and forget" black box solution
|
797.95 |
|
|
NS5 5 Port Marine Network Switch
More and more boats now have a wireless router fitted or utilize devices like our 4G Connect for internet connectivity. For optimum data transfer speed, a wired Ethernet connection still offers the fastest and most reliable network connection onboard a boat, and for Streaming TV, VOIP, Security Cameras, and other data-intensive services we always recommend using a wired connection.
Our NS5 Network Switch provides a simple and rugged solution to increasing the number of wired Ethernet connections on the vessel. Designed to operate from a 9v to 36v DC supply, with dual redundancy power supply design, a DIN rail mount, and five RJ45 10/100 Ethernet ports, the NS5 allows you to reliably expand your boat’s Ethernet network.
Installation could not be easier, simply connect one of the NS5’s RJ45 sockets to a LAN socket on our 4GConnect or 4GXtream routers, using a normal network cable and wire the NS5 directly to the boat’s 12v or 24v DC supply. Our 4G router will continue to provide IP addresses to any device plugged into the NS5 (via DHCP) and you can immediately see the status of all the Ethernet connections by the flashing Yellow and Green LEDs on each of the NS5’s ports.
Specifications:
5 Port Network Switch
12/24v DC low power operation
Dual redundancy power supply design
Connects to the router via RJ45 Cat 5/6 network cable connection
Supports 10/100 base-T
DIN Rail (IEC/EN 60715 – 35 × 7.5mm) mounting bracket and 100mm rail included
Status indicators for power and network link status
Version: NMEA0183, NMEA2000
|
142.75 |
|
|
Outdoor Antenna for GX LTE 4G-A
This antenna is optimized for 4G frequency bands and, as such, will have slightly better reception on the 4G network. It can be used with the GX LTE 4G for 2G, 3G, and 4G bands.
If the 2G/3G variant does not provide sufficient signal quality in an installation, the solution is to contact a local GSM antenna provider. All the necessary information, including a link to the cellular modem (Simcom) used, can be found in this manual.
Specifications:
Mounting Option: Screw mount
Cable Type: RG-316
Cable Length: 3.0 m
Connector: SMA male straight
Frequencies: 800/900/1800/1900/2100 MHz
Signal Gain: 3 dBi
Please contact your dealer for any returns, repairs or support issues related to this product.
|
35.70 |
|
|
iSeaSense Wireless Speed Depth Temp Pack
Digital Yacht iSeaSense is a new range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity – allowing for maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.
Top quality and highly accurate sensors are used for boat depth, speed, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.
iSeaSense is easy to specify. Available as two main starter packs, everything is included for easy installation and ordering. No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.
iSeaSense Pack 1 is a comprehensive boat depth, speed, and temperature pack. A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.
A full NMEA 2000 backbone cabling pack is included and the wireless interface for connectivity. There is a spare cable and connection point for additional NMEA 2000 devices such as a multi-function display or Digital Yacht’s range of instruments.
iSeaSense features an easy-to-use web interface. No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.
The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.
The data can also be used by 100’s popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.
Operation
You can access the iSeaSense dashboard through its own web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument's data. So no complicated programming software or app is required.
By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.
With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display. The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.
iSeaSense Pack Features:
Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor
iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad
Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location
Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays
Interface Features:
NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server.
Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass
Network diagnostics, settings, and calibration capability
Data logging
Self-powered from NMEA 2000 backbone
Integrated wifi antenna typically footprints boats up to 20m
Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus)
Transducer Features:
Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot
Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second
235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders
Max depth 100m
Supports up to 22-degree hull deadrise
Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone
Standard 2” thru hull size/diameter
Includes Bluetooth interface for advanced calibration and set-up features if required
Stainless steel and bronze skin fittings available as an option
|
705.55 |
|
|
iSeaSense Wireless Speed Depth Temp Pack Plus Wind
Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity. This pack includes speed, depth, temperature transducer plus wind sensor.
Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity, allowing maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.
Operation:
You can access the iSeaSense dashboard through its web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument data. So no complicated programming software or app is required.
By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.
With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display. The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.
Key Features:
Top quality and highly accurate sensors are used for boat depth, speed, wind, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.
iSeaSense is easy to specify. Everything is included as two main starter packs for easy installation and ordering. No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.
iSeaSense includes the WND100 wind sensor with 20m cable and an interface to “T” directly to the NMEA 2000 backbone. It means there’s no heavy NMEA 2000 cabling to the top of the mast and no need for complex mast top terminations for the Wind Sensor.
iSeaSense also includes depth, speed, and temperature sensors. A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.
A full NMEA 2000 backbone cabling back the wireless interface for connectivity and a spare cable and connection point for additional NMEA 2000 devices are included.
With NMEA 2000, expanding the system is easy and you can add any Digital Yacht’s instruments such as GPS, AIS, electronic compass, and more. You can also send the instrument data to your NMEA 2000 chart plotter or display.
iSeaSense features an easy-to-use web interface. No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.
You can calibrate the wind sensor via the iSeaSense web interface and also displays true and apparent wind speed and angle plus VMG calculations.
The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.
The data can also be used by 100 popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.
iSeaSense Pack Features:
Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor
Pack also includes WND100 mast head wind sensor – adding wind data to the system and network
Easy to install mast head unit with 20m cable and NMEA 2000 interface
iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad
Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location
Calibrate the wind sensor via the iSeaSense interface
Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays
Interface Features:
NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server.
Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass
Network diagnostics, settings, and calibration capability
Data logging
Self-powered from NMEA 2000 backbone
Integrated wifi antenna typically footprints boats up to 20m
Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus)
Transducer Features:
Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot
Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second
235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders
Max depth 100m
Supports up to 22-degree hull deadrise
Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone
Standard 2” thru hull size/diameter
Includes Bluetooth interface for advanced calibration and set-up features if required
Stainless steel and bronze skin fittings available as an option
Wind Sensor Features:
The WND200 package comprises a WND100 mast head unit plus iKonvert NMEA 0183-2000 interface supporting 5Hz fast wind mode
8-18V power with ultra-low 25mA power consumption
Supplied with 20m ultra thin 4mm masthead cable for easy cable runs through mast (4 core screened)
iKonvert NMEA 2000 interface included for system integration
Wind angle accuracy is better than 4 degrees
Wind speed accuracy better than 3%
Min wind speed 1.7 knots – max 80 knots
Settling time typically 1.3 seconds
|
1255.80 |
|