|
Dual Buss Bar with Cover - 12 Terminals
This dual bus bar is designed for DC positive or negative distribution on one block or AC neutral and safety ground collection on one block. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover.
Features:
Includes two 1/4"-20 stainless steel stud terminals and six #8-32 stainless steel screw terminals per buss
Installs with four #8 FH fasteners (included)
48VDC, 150A per buss; 300VAC, 150A per buss
CE and RoHS compliant
Specifications:
Terminals: 12
Length (inch): 5-1/2"
Width (inch): 2-3/4"
Depth (inch): 1-11/16"
Max. Amps: 150
Fastener: #8 FH
Weight: 0.59 lb.
|
24.73 |
|
|
Buss Bar with Cover - 6 Terminals
This bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover.
Features:
Includes two 5/16"-18 stainless steel stud terminals and six #10-32 stainless steel screw terminals
Installs with four #8 FH fasteners (included)
48VDC, 300A; 300VAC, 300A maximum
CE and RoHS compliant
Specifications:
Terminals: 6
Length (inch): 5-1/2"
Width (inch): 2-3/4"
Depth (inch): 1-11/16"
Max. Amps: 300
Fastener: #8 FH
Weight: 0.68 lb.
|
26.00 |
|
|
5029
ST Blade Fuse Block w/ Cover - 12 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.26 |
|
|
2356100 - Water Resistant 100A Busbar with Cover
Water-resistant bussing for harsh environments. Built with wing screws for toolless access.
Features:
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain a water-resistant rating if less than 4 wires are used
Nests with other water-resistant 100A common busbars and ST-Blade water resistant fuse block for space-saving wiring
Ideal for positive distribution and for the collection of negative or AC ground circuits
Meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four (4) write-on circuit labels
Small format standard and custom labels are available
Wing-screws designed for tool-free installation of cover to meet ABYC compliance
Technical Specifications:
Cover - yes
Maximum Voltage - 300V AC - 48V DC
Terminal Stud - 1 x #10-32
Continuous Rating - 100A AC or DC
Bus Material - Tin-plated Copper
Mounting Holes - Accepts 1/4" (6mm) screws
Terminal Screws - 4 x # 8-32
Wire Size - Input - (1) 8 AWG to 4 AWG
Wire Size - Load - (4) 16 AWG to 10 AWG
In the Box:
2356100 Busbar
Instruction Manual
*Sold as an Individual
|
32.59 |
|
|
Dual USB-C Power Socket
A dual USB-C Power Socket charges two devices simultaneously. The total output 8A load is split 4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently. A protective dust cap extends the life of the charger.
Features:
Constructed of injection molded nylon
Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires
Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105)
Blue LED illumination
IP65 rating
CE and RoHS compliant
Specifications:
Output DC: 5V/8A
Input: 8-32VDC
USB-C Watts: 60W@24V
Plug-In Side Diameter: (inch) 1-7/16"
Length: (inch) 2-1/4"
*Sold as an Individual
|
49.14 |
|
|
Dual USB Power Socket
This USB power socket charges two devices simultaneously. Input 12V–24V. Total output DC 5V/4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Blue LED illumination. Protective dust cap extends the life of the charger. Fits Sea-Dog® Line standard 1-1/8” Power Socket Shell 426100. IP65 rating.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.84 |
|
|
Dual USB Power Plug with Voltage/Amp Meter
LCD screen displays charging status in amps, battery voltage, and low voltage audio alarm. Stamped stainless steel and injection molded nylon construction this USB power plug adapter charges two devices simultaneously. Input 12-24V, Single output DC 5V/2.4A. Total output is a 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Can be used on a boat, car, or RV. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.56 |
|
|
Dual USB Socket/Voltmeter with Hidden Display
This Dual USB Socket allows for two devices to be charged simultaneously while also displaying the batteries output. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Also fits Sea-Dog® Power Socket Shell 426100. Output DC 5V/4.8A. Input 12-24VDC. Red LED display. IP65 rating.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.68 |
|
|
Round Rainbow Voltmeter with USB & USB-C Power Socket
Rainbow Volt Meter with USB 3.0 & USB-C Power Socket charges two devices simultaneously while the rainbow dial displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger. The rainbow display gives the user quick, visual, color-coded voltage information. Includes an On/Off button to conserve battery power when not needed.
Features:
Red/orange means the voltage is too low
Green means voltage is normal
Rainbow volt meter reads voltage up to 14.6 volts
Constructed of injection molded nylon
Installation is as easy as drilling a 1-1/8” hole, inserting the socket body, tightening the locking nut, and connecting the wires
Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105)
RoHS compliant & IP65 rating
Specifications:
Output DC: 5V/6A
Input: 8-32VDC
USB-C Watts: 60W@24V
USB Watts: 36W@12V
Plug-In Side Diameter: (inch) 1-7/16"
Length: (inch) 1-1/2"
*Sold as an Individual
|
33.66 |
|
|
SS Maneuvering Knob with Black Nylon Insert
Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). Designed for 1" x 3/4" oval tubing. Direct replacement for 230323 and 230325.
|
35.00 |
|
|
Kayak Adjustable Footbrace with Rudder Control
Sea-Dog's Kayak Adjustable Footbrace with Rudder Control offers the same great benefits as its fixed counterpart, with the added benefit of rudder control capabilities. One of the easiest footbraces to adjust while on the water.
Features:
Measures 14-1/2 inches apart
Proudly constructed in the USA of injection-molded polypropylene and glass-filled nylon
Specifications:
Rod Color: Black
Weight: 2.0 lbs
|
55.10 |
|
|
Kayak Recreational Footbrace with Rudder Control
This Kayak Recreational Footbrace with Rudder Control includes the addition of a channeled track to slide in, adding rudder control functionality to Sea Dog’s standard Recreational Footbrace.
Features:
Measures 14-1/2 inches apart
Proudly constructed in the USA of injection-molded polypropylene and glass-filled nylon
Specifications:
Track Type: Standard
Weight: 1.55 lbs
Fastener Size: 1/4 in.
|
26.64 |
|
|
12V Power Socket with Blue LEDs
The LED power socket adds power easily, almost anywhere. Two blue LEDs light up the interior.
Features:
Constructed of injection-molded nylon and ABS with stamped brass contacts
Installation is as easy as drilling a 1-1/8 in. hole, inserting the socket body, tightening the locking nut, and connecting the wires
Also fits the Sea-Dog Power Socket Shell (426100) and Mounting Bracket (426105)
IP65 rating
Specifications:
Input: 12-24VDC. 16A.
Diameter: 1-7/16 in.
Length: 1-9/16 in.
Height: 1-1/16 in.
Volts: 12-24
LEDs: 2
LED Color: Blue
Weight: 0.08 lb.
|
6.65 |
|
|
5026 ST Blade Fuse Block with Cover - 12 Circuit with Negative Bus
Features:
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.78 |
|
|
SEA-DOG
Sea-Dog Line carries quality marine gear such as Deck Hardware, Hinges, Lighting, Plumbing, Fishing Equipment, Clamcleats, Chain and Rigging Hardware and more.
|
|