8053 Slate Grey - 6 Position - Vertical Features: Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions Designed for flybridge and open cockpit applications ON-OFF Contura Switches ON indicating LEDs embedded in switches Watertight mounting gasket included Countersunk mounting holes throughout Two-part polyurethane slate gray finish Industry standard height and width Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion Completely wired and ready to install Specifications: Weatherproof: Water Resistant Positions: 6 Nominal Voltage: 12v / 24v DC Panel Cumulative Rating: 45A Switch Rating: 20A @ 12v DC / 15A @ 24v DC Height: 7.5" Width: 5.25" Depth: 3" Included: (6) 5021 Panel Mount AGC/MDL Fuse Holder (1) 8030 Basic DC Panel Label Set - 30 Labels (6) 8230 Contura Switch SPST Gray - OFF-ON *NOTE: Waterproof panel labels are not backlit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8054 Slate Grey - 3 Position - Vertical  Features: Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions Designed for flybridge and open cockpit applications ON-OFF Contura Switches ON indicating LEDs embedded in switches Watertight mounting gasket included Countersunk mounting holes throughout Two-part polyurethane slate gray finish Industry standard height and width Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion Completely wired and ready to install Specifications: Weatherproof: Water Resistant Positions: 3 Nominal Voltage: 12v / 24v DC Panel Cumulative Rating: 45A Switch Rating: 20A @ 12v DC / 15A @ 24v DC Height: 3.75" Width: 5.25" Depth: 3" Included: (3) 5021 Panel Mount AGC/MDL Fuse Holder (1) 8030 Basic DC Panel Label Set - 30 Labels (3) 8230 Contura Switch SPST Gray - OFF-ON *NOTE: Waterproof panel labels are not backlit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

230V AC Main + 6 Positions PN: 8127 White Switches (1) 16A Double Pole Circuit Breaker Installed (3) 8A Single Pole Circuit Breaker Installed Features: 230V Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions Maximum panel amperage - 50 Amperes MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance Two-part polyurethane slate gray finish Heavy 1/8" aluminum 5052 alloy Industry standard height and width Countersunk mounting holes throughout Detailed installation instructions and cutout template included Includes set of 30 common Large Format Labels Over 500 individual Labels available WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AC Main + 6 Positions / DC Main + 18 Positions Installed AC Breakers (1) 30A (3) 15A (1) 8247 AC Digital Multimeter w/ Alarm Installed DC Breakers (1) 100A Main (12) 15A (1) 8248 DC Digital Multimeter w/ Alarm 120V AC 12/24V DC All AC and DC buses installed and fully pre-wired Label backlighting pre-installed ON - indicating LEDs installed in all circuit positions 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch Maximum panel amperage - 100 Amperes AC, 50 Amperes DCMIL-C5541C or equivalent immersion undercoating for lifetime corrosion resistance Two-part polyurethane slate gray finish Heavy 1/8" aluminum 5052 alloy Detailed installation instructions and cutout template included Countersunk mounting holes throughout Includes set of 60 common AC and DC Large Format Labels Over 500 individual labels available WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

120 Volt AC Main + 6 Position - Vertical Features: All circuit label positions are backlit "ON" indicating LEDs installed in all circuit positions Includes 4206-Square Format Label Set Specifications: Positions: 6 Nominal Voltage: 120V AC Maximum Amperage*: 100A Height: 7.75" (196.85mm) Width: 4.88" (123.95mm) Depth: 3.00" (76.2mm) Weight: 2.70lb (1.22kg) Includes: (6) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (1) - 4206 - Basic AC Label Kit - 30 Black Square Labels [LABEL] (1) - 7414 - A-Series Flat Rocker Circuit Breaker - Double Pole 30A (Main) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12 Volt DC 8 Position - Vertical Features: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 8 Nominal Voltage: 12V DC Maximum Amperage*: 100A Height: 7.75" (196.85mm) Width: 4.88" (123.95mm) Depth: 3.00" (76.2mm) Weight: 2.60lb (1.18kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. Includes: (8) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL] WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8027 AC Main +6 Position Breaker Panel - White Switches Features: Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions Specifications: Positions: 6 Nominal Voltage: 120v AC Height: 7.5" Width: 5.25" Included: (1) 8031 Basic AC Panel Label Set - 30 Labels (7) 8034 LED - 120v AC Green (1) 8066 LED - 120v AC Red (3) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A (Branch) (1) 7238 A-Series White Toggle Circuit Breaker - Double Pole 30A (Main) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8084 AC Main +6 Positions/DC Main +15 Positions Toggle Circuit Breaker Panel - White Switches Features: Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed Maximum panel Amperage: 100 Amperes DC / 50 Amperes AC AC Features: Red reverse polarity indicating LED Ready for installation of optional 4029 AC Isolation Cover 9353, 0-150 Volt AC Voltmeter DC Features: 100 Amp C-Series circuit breaker provides main circuit protection and switching for DC branch circuits 8003, 8-16 Volt DC Voltmeter 8017, 0-100 Amp DC Ammeter Owner upgradeable to 24 Volts with 8240, 18-32 Volt DC Voltmeter Specifications: AC Positions: Main +6 DC Positions: Main +15 120 Volts AC 12 Volts DC (1) 30A - (3) 15A AC Circuit Breakers (1) 100A - (9) 15A DC Circuit Breakers *Combined AC/DC panels require a AC Insulating Cover to meet ABYC Standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AC Main + 6 Positions Description: Main + 6 Positions 30A Double Pole Installed: 1 15A Single Pole Installed: 4 Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions Maximum panel amperage - 50 Amperes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8184 AC Main + 6 Positions/DC Main +15 Positions Switches Color: White Features: All AC and DC buses installed and fully pre-wired Label backlighting pre-installed ON - indicating LEDs installed in all circuit positions 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch Specifications: Positions: 6 AC / 15 DC Nominal Voltage: 230v AC / 12v DC Height: 10" Width: 14.75" Depth: 3" Included: (3) 7299 A-Series White Toggle Circuit Breaker - Single Pole 8A (AC Branch) (1) 7294 A-Series White Toggle Circuit Breaker - Double Pole 16A (AC Main) (1) 9354 AC Voltmeter - 0 to 250v AC (AC Meter) (9) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A (DC Branch) (1) 7250i Circuit Breaker CA1 100A Red IP (DC Main) (1) 8017 DC Analog Ammeter - 0 to 100A w/ Shunt (DC Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AC Main + 6 Positions / DC Main + 18 Positions Switches Color: White Installed AC Breakers (1) 16A (3) 8A Installed DC Breakers (1) 100A Main (12) 15A Voltage 230v - 12/24V DC All AC and DC buses installed and fully pre-wired Label backlighting pre-installed ON - indicating LEDs installed in all circuit positions 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch Maximum panel amperage - 100 Amperes AC, 50 Amperes DC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8262 Waterproof Panel 4 Position - Slate Grey Features: Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions Designed for flybridge and open cockpit applications ON-OFF Contura Switches ON indicating LEDs embedded in switches Watertight mounting gasket included Countersunk mounting holes throughout Two-part polyurethane slate gray finish Industry standard height and width Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion Completely wired and ready to install Specifications: Weatherproof: Water Resistant Positions: 4 Nominal Voltage: 12v / 24v Panel Cumulative Rating: 45A Switch Rating: 20A @ 12v DC / 15A @ 24v DC Height: 3.75" Width: 5.25" Depth: 3" Included: (4) 5021 Panel Mount AGC/MDL Fuse Holder (1) 8214 Black 60 Label Set (4) 8230 Contura Switch SPST Gray - Off-On WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8261 Waterproof Panel 8 Position - Slate Grey Features: Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions Designed for flybridge and open cockpit applications ON-OFF Contura Switches ON indicating LEDs embedded in switches Watertight mounting gasket included Countersunk mounting holes throughout Two-part polyurethane slate gray finish Industry standard height and width Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion Completely wired and ready to install Specifications: Weatherproof: Water Resistant Positions: 8 Nominal Voltage: 12v / 24v Panel Cumulative Rating: 90A Switch Rating: 20A @ 12v DC / 15A @ 24v DC Height: 3.75" Width: 9.37" Depth: 3" Included: (8) 5021 Panel Mount AGC/MDL Fuse Holder (1) 8214 Black 60 Label Set (8) 8230 Contura Switch SPST Gray - Off-On WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

13 Positions (10) 15A Single Pole Circuit Breakers White Switches Features: All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters) All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance Two-part polyurethane slate gray finish Heavy 1/8" aluminum 5052 alloy Industry standard height and width Countersunk mounting holes throughout Detailed installation instructions and cutout template included Includes set of 30 common Large Format Panel Labels Over 500 individual labels available WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4322 Circuit Breaker Switch Panel 6 Position - Gray Designed for exposed mounting applications. Features: Illuminated 15A circuit breakers provide switching, “ON” indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing application Polycarbonate/ABS panel surface is UV-stabilized, flame retardant, and will not corrode Silicon breaker boots and gasket protects against water ingress Low profle makes it easy to install in tight spaces Fast-on circuit breaker connectors make it quick to wire Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems Specifications: Color: Gray Positions: 6 Nominal Voltage: 12 VDC Maximum Amperage: 45A Terminal Type: 1/4" Male Quick Connect Hardware: Stainless Steel #6 x 5/8" mounting screws  Ring Terminal Size: M5 (#10)