Adapter Plate f/200 x 100 VESA Conversion The Majestic AD200 is designed as an Adaptor plate for the end of a bracket with a VESA of 100x100, to fit to the back a flat screen TV with a VESA of 200 x 100. The Majestic AD200 is designed as an Adaptor plate for the end of a bracket with a VESA of 100x100, to fit to the back a flat screen TV with a VESA of 200x100. IMPORTANT: You should only use an adaptor plate with a bracket that is rated to hold the size and weight of your TV.  Especially if you intend on using a swing arm bracket. The Majestic range of brackets have a VESA of up to 100x100.  The AD200 acts as an adaptor plate which fits to the 100x100 VESA mount bracket, allowing you to use the 200x100 hole spacing to fit to the 200x100 VESA on the TV. Majestic do not recommend fitting a 32" TV to a swing arm bracket when being used in the mobile environment.  Majestic recommend pairing the AD200 with the BKT100 and will cover warranty on this combination.  

Adapter Plate for GPSMAP® 12x2 to 12x3 Series This adapter bezel kit allows you to install a new GPSMAP 12x3 into the existing cutout of a GPSMAP 12x2 Touch, 12x2 Plus, 7412 or 7612 chartplotter in your dash.

Adapter Plate for Simrad HALO™ Open Array Radar Use for Modular Mounts - ADA-R1 Required The Seaview Top Plates are made from a pre-drilled plate that has been incased in a UV resistant ABS plastic. Drill templates come with all Seaview Top Plates. Simply drill the holes that are marked to your specific Simrad electronic. This makes for a very clean installation with no unecessary holes.

Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed Base Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome

Volvo Penta 120S Stainless Steel Adapter Plate for Saildrive Split Rings Tecnoseal Volvo Adaptor Plates for 00706-1 Volvo Penta 120S split ring anode. Screws included.

Adapter Plate for GPSMAP® 7x2 to 7x3 Series This adapter bezel kit allows you to install a new GPSMAP 7x3 into the existing cutout of a GPSMAP 7x2 or 7x2 Plus chartplotter in your dash.

Adapter Plate for GPSMAP® 9x2 to 9x3 Series This adapter bezel kit allows you to install a new GPSMAP 9x3 into the existing cutout of a GPSMAP 9x2 or 9x2 Plus chartplotter in your dash.

Direct Mount Adapter Plate for Simrad HALO™ Open Array Radar Seaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the Simrad HALO™ open array.

4.75" Square Base with VESA (4 x 75mm) (4 x 100mm) Hole Patterns & 1.5" Ball Plate Hole Patterns: 100 x 100 VESA Pattern 75 x 75 VESA Pattern 100 x 50 Half VESA Pattern Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Features: Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.59 lbs.

100 x 100mm VESA Plate w/1.5" Ball This RAM-246U consists of a 1.5" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner.  Square plate features the VESA hole pattern for connection to a wide variety of devices Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Material:  Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Plate Size: 4.75" x 4.75" Note: The "U" in the part number reflects product packaged in poly bag.

Forklift Overhead Guard Plate with D Size 2.25" Ball Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three popular ball sizes: 1.5", 2.25 & 3.68" diameter may be attached to this plate system. Up to 2 balls may be attached to the same plate for multiple applications. Features: Hole Patterns: AMPS 4-Hole Pattern 100 x 100 VESA Pattern 75 x 75 VESA Pattern Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided. Material: Powder Coated Marine Grade Aluminum Weight: 8.6 lbs.

Forklift Overhead Guard Plate Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three popular ball sizes: 1.5", 2.25 & 3.68" diameter may be attached to this plate system. Up to 2 balls may be attached to the same plate for multiple applications. Features: Hole Patterns: AMPS 4-Hole Pattern 100 x 100 VESA Pattern 75 x 75 VESA Pattern Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided. Material: Powder Coated Marine Grade Aluminum Weight: 7.95 lbs.

Forklift Overhead Guard Plate with C Size 1.5" Ball Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three popular ball sizes: 1.5", 2.25 & 3.68" diameter may be attached to this plate system. Up to 2 balls may be attached to the same plate for multiple applications. Features: Hole Patterns: AMPS 4-Hole Pattern 100 x 100 VESA Pattern 75 x 75 VESA Pattern Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided. Material: Powder Coated Marine Grade Aluminum Weight: 7.85 lbs.

8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: Part number reflects product packaged in clear clam shell for store shelf display

RAM 75mm X 75mm VESA 3.625" Plate with 1.5" Diameter Ball This RAM-2461U consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. The RAM-2461U is compatible with the following electronic devices: MobileDemand XTablet T8600 Glacier Computer Ridgeline Routeware DMS 5000