Flotec FP0S3000X Thermoplastic Waterfall/Utility Pump 4/10 HP With a quality design providing years of trouble free service our line of Thermoplastic waterfall / Utility pumps can help turn your backyard into a garden oasis.   KEY FEATURES Oil free and fish safe Stainless steel or engineered composite construction - superior corrosion resistance Dual ball bearing design - quiet, long lasting, years of trouble-free service High performance - ideal for waterfalls and streams WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  4/10 MAXIMUM LIFT:  25' MAXIMUM CAPACITY:  3000 GPH FLOW at 10' LIFT:  1900 GPH SWITCH TYPE:  Manual Operation (No Switch) DISCHARGE PIPE SIZE:  1-1/4" (Ships With Multiple Adapters) MAXIMUM SOLIDS HANDLING SIZE:   AMP DRAW (full load):  3 Amps CORD LENGTH:  15' w/ grounded 3-prong plug VOLTAGE:  115v AC, 60 Hz MAXIMUM WATER TEMPERATURE:  100°F (38°C)

Flotec CYCLONE™ Water Removal Utility Pump The CYCLONE™ pumping system is designed for every day or emergency use. Perfect for transferring or removing unwanted water from waterbeds, aquariums, or non-draining sinks.   KEY FEATURES Multipurpose pump designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks Self-priming at 8-10 ft. vertically Corrosion-resistant, compact and portable WARRANTY 90-day limited warranty BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 1/12 MAXIMUM LIFT: 43' MAXIMUM CAPACITY: 350 GPH FLOW at 10' LIFT: 300 GPH SWITCH TYPE: Manual Operation (No Switch) SUCTION SIZE: Male Garden Hose DISCHARGE SIZE: Male Garden Hose MAXIMUM SOLIDS HANDLING SIZE: Clear Water Only AMP DRAW (full load): CORD LENGTH: 6' w/ 3-prong grounded plug VOLTAGE: 115v AC, 60 Hz MAXIMUM WATER TEMPERATURE: 77°F (25°C)

Flotec Portable Utility Booster Pump Manages a variety of home applications including sprinkling, pressure boosting and dewatering. Can be used as a portable sprinkler pump Ideal for boosting pressure to wash cars, boats and farm equipment 115V air cooled motor and has a 1 year limited warranty    BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/2 HP MAXIMUM PRESSURE:  62 PSI MAXIMUM CAPACITY:  10.3 GPM FLOW at 10' SUCTION LIFT and 30 PSI:  5.1 GPM SWITCH TYPE:  No Switch (Manual Operation) SUCTION SIZE:  1" (ships with garden hose adapter) DISCHARGE SIZE:  1" (ships with garden hose adapter) MAXIMUM SOLIDS HANDLING SIZE:  .06" AMP DRAW (full load):  7 Amps CORD LENGTH:  6' w/ 3-prong grounded plug VOLTAGE:  115v AC, 60 Hz

HYPRO 9203C CAST IRON PEDESTAL MOUNT PUMP The Hypro Cast Iron Pedestal Mount (9203C) pump model has a direct drive and a maximum free flow of 140 GPM. It has a maximum pressure of 180 P.S.I. as well as a maximum speed of 6,000 RPM.   Max. flow: 140 gpm/530 lpm (free flow) Max. pressure: 180 psi/12.4 bar (Shut off) Max. speed: 6000 rpm Max. fluid temperature: 140°C   Pedestal mount, direct drive Housing available: cast iron and stainless steel Port sizes: 1 ¼" NPT inlet, 1" NPT outlet Shaft: 5/8" solid Pump shaft rotation: CCW (9202S-R is CW) Impeller: glass-filled nylon (cast iron standard); glass filled polypropylene (stainless standard) Pump seals: Viton/ceramic standard (Life Guard silicon carbide, Buna-N ceramic and Viton/silicon carbide available) Life Guard silicon carbide standard in stainless steel pumps

Yamada DP-10BAN 3/8" Aluminum Pump DP-10BAN AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS Yamada® DP-10BAN series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 6 gallons per minute (DP-10) or 8 gallons per minute (DP-15). DP-10 pumps are available in aluminum, stainless steel (316), and polypropylene, DP-15 pumps are available in either polypropylene or groundable acetal. A wide selection of diaphragm materials cover a variety of applications.   Inlet (in): 3/8 Outlet (in): 3/8 Max Flow (gpm): 6.0 Max Temp: 180 Max Solid (in): 1/32 Valve Type (in): 1/4 Air Motor Material: Aluminum Body Material: Aluminum   Elastomer Material: Buna N

Flotec FP3212 3-Wire 4 Inch Submersible Well Pump, 230 Volts 1/2 HP, 10 GPM 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.   KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 150ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing   3 year limited warranty HORSEPOWER:  1/2 PERFORMANCE SERIES:  10 GPM VOLTAGE:  230v, 60 Hz NUMBER OF WIRES:  3 plus ground BODY CONSTRUCTION:  Stainless steel MAXIMUM CAPACITY:  14 GPM OPERATING RANGE:  20' to 150' MAXIMUM DEPTH-TO-WATER:  150' MAX PSI:  105 psi PUMP DIAMETER:  3.78" DISCHARGE PIPE SIZE:  1-1/4" NPT RECOMMENDED BREAKER:  10 amp

Flotec FP5512 Cast Iron Centrifugal Pump 1/2 HP Economical, general purpose centrifugal pumps can be used for water transfer, circulation, fountains, waterfalls, pressure boosting and sprinkling.   FEATURES Superior performance at depths to water of 25' or less Rugged, heavy-duty cast iron pump housing Ready-to-install 230 volt motor (dual voltage)   WARRANTY   1 year limited warranty     BODY CONSTRUCTION:  Cast Iron   HORSEPOWER:  1/2   MAXIMUM CAPACITY:  22 GPM   MAX LIFT:  25'   MAXIMUM DISCHARGE PRESSURE:  36 psi   MAXIMUM INLET PRESSURE:     MAXIMUM TOTAL PRESSURE:     SUCTION PIPE SIZE:  1-1/4" NPT   DISCHARGE PIPE SIZE:  1" NPT   AMP DRAW (full load):  4.7 amps on 230v / 9.4 amps on 115v   VOLTAGE:  230v / 115v , 60 Hz   MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)   RECOMMENDED BREAKER:  15 amp on 230v / 15 amp on 115v

Flotec FP2211 2-Wire 4 Inch Submersible Well Pump, 115 Volts 1/2 HP 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.   KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 150ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing   WARRANTY   3 year limited warranty     HORSEPOWER:  1/2   PERFORMANCE SERIES:  10 GPM   VOLTAGE:  115v, 60 Hz   NUMBER OF WIRES:  2 plus ground   BODY CONSTRUCTION:  Stainless Steel and Thermoplastic   MAXIMUM CAPACITY:  13.6 GPM   OPERATION RANGE:  20' to 150'   MAXIMUM DEPTH-TO-WATER:  150'   MAX PSI:  105 psi   PUMP DIAMETER:  3.78"   DISCHARGE PIPE SIZE:  1-1/4" NPT     RECOMMENDED BREAKER:  25 amp

Flotec FP2212 2-Wire 4 Inch Submersible Well Pump, 230 Volts 1/2 HP 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.   KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 150ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing   3 year limited warranty HORSEPOWER:  1/2 PERFORMANCE SERIES:  10 GPM VOLTAGE:  230v, 60 Hz NUMBER OF WIRES:  2 plus ground BODY CONSTRUCTION:  Stainless Steel MAXIMUM CAPACITY:  13.6 GPM OPERATING RANGE:  20' to 150' MAXIMUM DEPTH-TO-WATER:  150' MAX PSI:  105 psi PUMP DIAMETER:  3.78" DISCHARGE PIPE SIZE:  1-1/4" NPT RECOMMENDED BREAKER:  10 amp

Flotec FPZS50T Submersible Thermoplastic Sump Pump Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1/5" NPT Power Cord:  8', Grounded

Gianneschi ECOINOX-2-24V SS Self-Priming Pump .37Kw ECOJET Series Jet Pump and Motor unit, 304 Stainless Steel construction, Noryl impeller, 316 Stainless Steel Shaft. Motor is 0.37 KW (0.5 Horsepower), 2900 RPM, 24 Volts DC.

Flotec FP4012-10 Thermoplastic Shallow Well Jet Pump 1/2 HP This new revision provides good pressure pumping from wells where the depth-to-water is 25' or less. KEY FEATURES Perfect for shallow wells (depth-to-water less than 25') Thermoplastic construction for higher corrosion resistance 1-1/4" Suction / 1" Discharge Comes with pre-wired 30/50 pressure switch WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/2 MAXIMUM CAPACITY:  8 GPM FLOW at 10' LIFT and 40 PSI:  6.4 GPM MAX LIFT:  25' MAX PRESSURE:  77 psi PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  9.4 amps VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)

Flotec FP4112 Cast Iron Shallow Well Jet Pump 1/2 HP Cast iron shallow well jet pumps provide superior performance and high capacities with more pressure for shallow wells 25' or less. KEY FEATURES Superior performance at depths to water of 25' or less Rugged, heavy-duty cast iron pump housing Ready-to-install dual voltage (115v/230v) motor 1-1/4" NPT suction and 1" NPT discharge pipe sizes WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  8.8 GPM FLOW AT 10' LIFT and 40 PSI:  7.8 GPM MAX PSI:  56 psi PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT MINIMUM SUCTION PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1" MINIMUM DISCHARGE PIPE SIZE:  3/4" AMP DRAW:  9.4 amps VOLTAGE:  115v/230v (preset to 115v), 60 Hz RECOMMENDED BREAKER:  15 amp LIQUID TEMP RANGE:  32°F-140 °F (0°C-60 °C) JET KIT:  included

Flotec FP4312 Thermoplastic Convertible Jet Pump 1/2 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. KEY FEATURES Superior performance at depths to water of 100' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install dual voltage motor preset to 115v - see manual for 230 volt conversion WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/2 MAXIMUM CAPACITY:  9 GPM (shallow well setup) FLOW AT 10' LIFT and 40 PSI:  7.8 GPM (shallow well setup) MAX LIFT:  25' w/ shallow well jet kit / 70' w/ deep well jet kit MAX PSI:  62 psi (shallow well setup) PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" MINIMUM SUCTION PIPE SIZE:  1-1/4" DRIVE PIPE SIZE:  1" DISCHARGE PIPE SIZE:  1" MINIMUM DISCHARGE PIPE SIZE:  3/4" AMP DRAW:  9.9 Amps on 115V / 4.95 Amps on 230V VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FPZS50V Submersible Thermoplastic Sump Pump 1/2 HP Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. FEATURES Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded