Jabsco Flexible Impeller Pedestal Pump Ped Mt Neo Imp 3/8 FEATURES Pump Body: Bronze Port Size: 3/8" NPT Internal Flow: 7.5 GPM Impeller: Viton, Neoprene or Nitrile Shaft Seal: Nitrile or Viton Lip Type Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. MARINE: Engine Cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump. INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc      Jabsco Flexible Impeller Pedestal Pump 3/8"NPT Neoprene Impeller

Jabsco 11830-0000 Endcover Jabsco Water Pump End Cover Used on Jabsco 2620 series pumps Replaces Jabsco 05855-0000, 11815-0000 Replaces Marine Power 0566-003P8 Replaces Westerbeke 18183 Replaces Volvo Penta 855724  

Jabsco 1673-1003 Pump 1/2" Ped Mt FEATURES Pump Body: Bronze Port Size: 1/2" NPT Impeller: Nitrile Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.) Impeller: Neoprene or Nitrile (Oil Resistant) Shaft Seal: Lip Seal or Mechanical seal, Buna N Shaft: Stainless Steel Bearings: Sealed Ball Bearings    APPLICATIONS  This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.   MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.   INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,   Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.   FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools   Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller  

Jabsco 18330-0000 Electric Clutch Pump 12V with 2" Ports This Manually Activated Clutch Pump Offers all the Benefits of Flexible Impeller Pumps with a High Capacity Flow Rate and Horizontally Oriented Ports.   Pump Body: Bronze Port Size: 2" NPT Flow: 83 GPM at 10 feet of Head, 1750 RPM Impeller: Nitrile Shaft Seal: Mechanical, Carbon-Ceramic Shaft: Brass Pulley: 7" Diameter     Used for  MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.   INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine, brine.   FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.     18330-0000 is Jabsco Electric Clutch Pump 12V, 2" NPT Ports, Double "A" Groove Pulley  

JABSCO 50270-2011 Bronze Clutch Pump 270 2A 12V Pump Body: Bronze head, Cast Iron bearing housing Port Size:  2" Flange or 2" BSP to BS21 (DIN2999) Flow: Nominal 270 Litres/min (60 gallons/min) at 1500rpm Impeller: Neoprene or Nitrile Shaft Seal: Mechanical Carbon/Ceramic Shaft: 316 Stainless Steel Pulley: Anodized Aluminum. 178mm (7") 'A' or 'B' section. This Jabsco Electric Clutch Pedestal Mount Pump has flanged Ports or British Standard Pipe Threads. It is constructed from marine quality bronze and stainless steel for ruggedness and reliability. It is easy to service and maintain and operate. Will tolerate abrasive wear and handles hard and soft solids without clogging and can pump in either direction. It will not airlock and is self-priming from dry up to 2.4m (7.8ft).   Jabsco Clutch Pump 2" Flange Ports, Neoprene Impeller, 12V, 1B Belt

JABSCO 51270-2011 BRZ PUMP 2" BSP PORTS NEO Pump Body: Bronze head, Cast Iron bearing housing Port Size: 2" Flanged, BSP or NPT Flow: Nominal 270 Liters/min (60 gallons/min) at 1500rpm Impeller: Neoprene or Nitrile Shaft Seal: Mechanical Carbon/Ceramic Shaft: 316 Stainless Steel Pulley: Anodized Aluminum. 180mm (7") 'A' or 'B' section.     This Jabsco Manual Clutch Pedestal Mount Pump has 2" Flanged Ports or British Standard Pipe Threads or NPT. It is constructed from marine quality bronze and stainless steel for ruggedness and reliability. The Jabsco 51270-2011 is easy to service, maintain and operate. It will tolerate abrasive wear and handles hard and soft solids without clogging. It can pump in either direction and will not airlock. The Non Centering one-piece handle will help prevent partial engagement. It has a self adjusting clutch to increase clutch life. It is also self-priming from dry up to 2.4m (7.8ft).   Jabsco Clutch Pump 2" British Standard Pipe Threads, Neoprene Impeller, 1A Or 1B Belt  

Oberdorfer N11HDM-E24 Pump Less Clutch 1.25" Oberdorfer Pumps N13HDM-E24, Acrylonitrile-Butadiene (NBR) Shaft Seal, 86 GPM, Mechanical Seal Type, Gear Pump w/ 24V Clutch, Bronze Gear - Pedestal FEATURES Pump Body:Bronze Ports:1 1/4" NPT Flow:60 GPM Max Pressure:150 PSI Max Bearings:Self Lubricating Carbon Bearings Gears:Bronze Helical Gears Shaft Seal:Acrylic-Graphite packing is standard, Teflon Optional. Optional Lip Seals in Viton/Teflon or Buna, Mechanical Buna or Viton Seals. Shaft:Stainless Steel Shafts Motor / Drive:Direct drive is the recommended drive arrangement. This pump is suitable for belt drive applications without needing pillow block bearings to achieve acceptable pump life. Electric Clutch Drive Available. We have many motor options and can assemble for you.

Jabsco 12490 Series Self Priming Stainless Steel Pump FEATURES Pump Body: 316 Stainless Steel Port Size: 1" NPT internal Flow: 26.0 GPM at 10 feet of head Pressure: Up to 26 PSI Impeller: Neoprene or Nitrile Shaft Seal: Lip Type in Stainless Steel Case Shaft: Steel motor shaft with special Stainless Steel sleeve. Motor: 3/4 HP, 1725 RPM, 60 Hz Single Phase, 115/230 Vac, Continuous Duty, Totally Enclosed Fan Cooled, 56 Frame, Capacitor Start. Thermal Overload Protection with Automatic Reset, Carrying Handle, 6' Cord with 3 Prong Grounded Plug.     APPLICATIONS / CHARACTERISTICS CHEMICAL - Industrial Motor Pump Unit Circulating, Transferring and Filtering of Chemicals, Plating Solutions, Pharmaceuticals, cosmetics and Farm Chemicals, Emptying and Filling Carboys, Vats, Tanks, Barrels or Entire Systems.    Jabsco Self Priming Stainless Steel Pump 1" NPT Ports 3/4HP Motor Nitrile Impeller  

Jabsco 12520-1274 Pump 1/4Hp Tefc 1Ph This item is 'build to order'. Please contact us for lead time.

JABSCO 30180-0003 Pump 1 1/2" Ports 23 GPM 115VAC Body: Bronze Impeller: Nitrile Shaft: 316 Stainless Steel Impeller Sleeve Over Motor Shaft Shaft Seal: Lip Type Motor: 1/3 HP Capacitor type 115v with 8" cord Built In Dry Running Capability (up to 30 minutes) After Initial Priming   MARINE: Bait Tank Circulation; Washdown, Utility Dockside Pump.   INDUSTRIAL: Industrial Filling Systems; Utility Shop Pump; Transfer Gum Arabic, Transfer Distilled Water; Recharge Water Softeners; Hydro-static Pressure Testing; Sump Pumping.   FOOD, BEVERAGE & DAIRY: Circulate Cooling Water; Defrost Refrigeration Coils; Fill Drums; Wash Down Equipment and Floors; Utility Pump.   HOME: Fill and Empty Tubs, Pools; Empty Basements and Cesspools; Water Systems; Water Lawns and Gardens; Remove Water from Low Areas; Recharge Water Softeners.   PLUMBING: Empty Clogged Drains, Empty Sumps, Sinks and Tubs; Pump Out Water Closets. FARM:  Fill Tractor Tires, Water Tanks; Pump out Silo Pits (liquid manure); Flush and Clean Animal Pens.    <  CONTRACTORS: Remove Water from Excavations; Supply Water to Mortar Boxes; Cement Mixing; Washdown Equipment.  

Jabsco Pump 1" Acme Ped 20Gpm   FEATURES Pump Body: 316 Stainless Steel Pedestal Pump Port Size: 1" ACME Threads with Bevel Seat or Clamp Type Flow: Nominal 23 USgallons/min (87 Litres/min) at 1750rpm Pressure: Pressure up to 4 bar Impeller: 3A Food Grade Neoprene or EPDM Shaft Seal: Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Handles soft solids - max. 12mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft). DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk. FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter. BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines. PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.   Jabsco Pedestal Pump 316SS 1" Acme Ports Std Pressure Neoprene Impeller Carbon Seal

Jabsco Pump 1" Ped Hp Neo Acme   FEATURES Pump Body: 316 Stainless Steel Pedestal Pump Port Size: 1" ACME Threads with Bevel Seat or Clamp Type Flow: Nominal 23 USgallons/min (87 Litres/min) at 1750rpm Pressure: Pressure up to 4 bar Impeller: 3A Food Grade Neoprene or EPDM Shaft Seal: Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Handles soft solids - max. 12mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft). DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk. FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter. BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines. PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.   Jabsco Pedestal Pump 316SS 1" Acme Ports High Pressure Neoprene Impeller Carbon Seal

Jabsco Pump 1" Ped Neo Tc Acme   FEATURES Pump Body: 316 Stainless Steel Pedestal Pump Port Size: 1" ACME Threads with Bevel Seat or Clamp Type Flow: Nominal 23 USgallons/min (87 Litres/min) at 1750rpm Pressure: Pressure up to 4 bar Impeller: 3A Food Grade Neoprene or EPDM Shaft Seal: Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Handles soft solids - max. 12mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft). DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk. FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter. BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines. PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.   Jabsco Pedestal Pump 316SS 1" Acme Ports Std Pressure Neoprene Impeller Tungsten Carbide Seal

Jabsco Pump 1" Ped Hp Neo Tc Acme   FEATURES Pump Body: 316 Stainless Steel Pedestal Pump Port Size: 1" ACME Threads with Bevel Seat or Clamp Type Flow: Nominal 23 USgallons/min (87 Litres/min) at 1750rpm Pressure: Pressure up to 4 bar Impeller: 3A Food Grade Neoprene or EPDM Shaft Seal: Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Handles soft solids - max. 12mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft). DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk. FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter. BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines. PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.   Jabsco Pedestal Pump 316SS 1" Acme Ports High Pressure Neoprene Impeller Tungsten Carbide Seal

Jabsco 1877K-2242E Elbow 1/2"-14 Nps