|
Jabsco Flexible Impeller Utility Pump W/Tefc Motor
FEATURES
Pump Body:
Bronze
Port Size:
1" NPT, Internal
Flow:
23 GPM at 10 feet of head.
Pressure:
Up to 26 PSI
Impeller:
Nitrile
Shaft Seal:
Lip Type
Shaft:
316 Stainless Steel Impeller Sleeve over Steel Motor Shaft
Motor:
3/4 HP, Capacitor Type, Open Drip Proof or Totally Enclosed Fan Cooled, Overload Protector, 1725 RPM, 60 Hz, Single Phase, 115/230 Vac, with 8 foot cord and plug wired for 115 Vac operation.
APPLICATIONS / CHARACTERISTICS
MARINE: Bait Tank Circulation; Washdown, Utility Dockside Pump.
INDUSTRIAL: Industrial Filling Systems; Utility Shop Pump; Transfer Gum Arabic, Transfer Distilled Water; Recharge Water Softeners; Ice Water Recirculation; Hydro-static Pressure Testing; Sump Pumping.
FOOD, BEVERAGE & DAIRY: Circulate Cooling Water; Defrost Refrigeration Coils; Fill Drums; Wash Down Equipment and Floors; Utility Pump.
HOME: Fill and Empty Tubs, Pools; Empty Basements and Cesspools; Water Systems; Water Lawns and
Gardens; Remove Water from Low Areas; Recharge Water Softeners.
PLUMBING: Empty Clogged Drains; Empty Sumps, Sinks and Tubs; Pump Out Water Closets.
FARM: Fill Tractor Tires, Water Tanks; Pump out Silo Pits (liquid manure); Flush and Clean Animal Pens.
CONTRACTORS: Remove Water from Excavations; Supply Water to Mortar Boxes; Cement Mixing; Washdown Equipment.
Jabsco Flexible Impeller Utility Pump 115V TEFC Motor 23GPM Nitrile Impeller
|
1501.02 |
|
|
Jabsco Flexible Impeller Pedestal Pump
FEATURES
Pump Body:
Brass, High Profile Verson
Port Size:
3/8" BSP or
3/8" NPT
Flow:
Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon/Ceramic Mechanical
Shaft:
Stainless Steel 12mm
APPLICATIONS / CHARACTERISTICS
Marine: Engine Cooling, Bilge Pumping, Water Circulation.
Industrial: Circulating and Transferring, Velocity Mixing.
Farming: Pumping Water for Stock, Liquid Ballast Transfer.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).
Jabsco Flexible Impeller Pedestal Pump 3/8" NPT High Profile
|
384.05 |
|
|
Jabsco Pump Ped Full Cam Neo
FEATURES
Pump Body:
Bronze pedestal
Port Size:
1" NPT
Flow:
Available with full cam or 2/3 cam for reduced flow.
Impeller:
Neoprene
Shaft Seal:
Carbon-Ceramic Face Type
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Marine Engine Cooling
Jabsco Flexible Impeller Pedestal Pump 1"NPT Full Cam Neoprene Impeller
|
913.52 |
|
|
Jabsco Transfer Pump/Motor
FEATURES
Pump Body:
Bronze
Port Size:
1/2" NPT Female. Includes Two 3/4" Male Garden Hose Adapters.
Flow:
6.0 GPM at 10 feet of head
Pressure:
to 17.3 PSI
Impeller:
Neoprene, Nitrile or Viton
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
1/6hp - 115 Vac, 60 Hz. ODP Motor
1/4hp - 115 Vac, 60 Hz. TENV Motor
Thermal Overload Protector Stainless Steel Shaft 8' Cord with 3 Prong Grounded Plug
APPLICATIONS / CHARACTERISTICS
INDUSTRIAL: Circulating and transferring, velocitymixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns
MARINE: Washdowns, utility dock side pump
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools
PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling
Jabsco Flexible Impeller Utility Pump 115V ODP Motor 6GPM Viton Impeller
|
813.66 |
|
|
Jabsco 12510-0001 Tranfer Pump 115V
FEATURES
Pump Body: Bronze
Port Size:< 3/8" NPT Internal and 3/4" Garden Hose External.
Flow: Up to 2.7 GPM
Pressure: Up to 21.6 PSI
Impeller: Neoprene, Nitrile or Viton
Shaft Seal: Lip Type
Motor: 1/6hp - 115 Vac, 60 Hz. ODP Motor
1/4hp - 115 Vac, 60 Hz. TENV Motor
1725 RPM, Thermal Overload Protection, Stainless Steel Shaft, 8 foot Cord wilh 3 Prong Grounded Plug.
APPLICATIONS
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
MARINE: Washdowns, utility dock side pump.
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling.
Jabsco Bronze Utility Transfer Pump 1/6HP 115V ODP Neoprene Impeller 2.7GPM, 21.6psi Max, 3/8"FNPT and 3/4" Garden Hose Ports
|
775.26 |
|
|
Jabsco 115V Transfer Pump
FEATURES
Pump Body:
Bronze
Port Size:
1/2" NPT Internal and 1" Hose Barb External. Adaptor for 3/4" Garden Hose.
Flow:
Up to 5.8 GPM
Pressure:
Up to 17.3 PSI
Impeller:
Neoprene, Nitrile or Viton
Shaft Seal:
Lip Type
Motor:
1/6hp - 115 Vac, 60 Hz. ODP Motor
1/4hp - 115 Vac, 60 Hz. TENV Motor
1725 RPM, Thermal Overload Protection, Stainless Steel Shaft, 8 foot Cord wilh 3 Prong Grounded Plug.
APPLICATIONS / CHARACTERISTICS
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
MARINE: Washdowns, utility dock side pump.
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling.
Jabsco Bronze Utility Transfer Pump 1/4HP 115V TENV Nitrile Impeller
|
724.54 |
|
|
Jabsco Pump with 115Vac Motor
FEATURES
Pump Body: Bronze
Port Size: 3/4" (19mm) Garden Hose External Thread and 1/2" NPT Internal
Flow: 9.6 GPM at 10ft
Pressure: 17.3 PSI Max
Impeller: Nitrile or Neoprene
Shaft Seal: Lip Type
Shaft: Stainless Steel Sleeve over Motor Shaft
Motor: 1/3 HP, 115V AC 60 HZ, 1725 RPM, Single Phase, Capacitor Type, Open Drip Proof or Totally Enclosed Fan Cooled.
Handle and 8' Cord with 3 prong grounded plug on ODP motor only
APPLICATIONS
The 11810-Series pumps are robust, portable self-priming Utility Pumps with a substantial flow rate.
MARINE: Bait tank circulation, transfer oil, wash down, and utility dock pumps.
INDUSTRIAL: Circulate coolant on machine tools, industrial filling systems, utility shop pump, transfer gum arabic, transfer distilled water, recharge water softeners, ice water recirculation, hydrostatic pressure testing, vacuum pump, and aspirating pump.
FOOD, BEVERAGE, & DAIRY: Circulate cooling water, defrost refrigeration coils, fill drums, wash down equipment and floors, and utility pump.
HOME: Fill and empty tubs and pools, empty basements, cesspools, water systems, water lawns and gardens, remove water from low areas, and recharge water softeners.
PLUMBING: Empty clogged sumps, drains, sinks and tubs, and pump out water closets.
FARM: Fill tractor tires, fill water tanks, pump out silo pits, liquid manures, transfer oil, and flush and clean animal pens.
CONTRACTORS: Remove water from excavations, supply water to mortar boxes and cement mixing, and washdown equipment.
|
1167.36 |
|
|
Jabsco Flexible Impeller Pedestal Pump Ped Mt Neo Imp 3/8
FEATURES
Pump Body:
Bronze
Port Size:
3/8" NPT Internal
Flow:
7.5 GPM
Impeller:
Viton, Neoprene or Nitrile
Shaft Seal:
Nitrile or Viton Lip Type
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock.
MARINE: Engine Cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc
Jabsco Flexible Impeller Pedestal Pump 3/8"NPT Neoprene Impeller
|
350.01 |
|
|
Jabsco 1673-1003 Pump 1/2" Ped Mt
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Impeller: Nitrile
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene or Nitrile (Oil Resistant)
Shaft Seal: Lip Seal or Mechanical seal, Buna N
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller
|
447.01 |
|
|
Jabsco 11860-0006 Pump 24V Elect Clutch
FEATURES
Pump Body:
Bronze
Port Size:
11860-Series, 1" NPT Internal
11870-Series, 1-1/4" NPT Internal
Electric:
12V, 24V or 32V
Pulley:
Single B groove or Double A groove
Impeller:
Nitrile
Shaft Seal:
Mechanical Carbon-Ceramic, Face Type
Shaft:
Stainless Steel
Bearings:
Shielded Ball Bearings
APPLICATIONS / CHARACTERISTICS
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.
MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.
INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.
FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.
Jabsco- Electric Clutch Pump 24V, 1" NPT Ports, 2 Groove "A" Belt Pulley
|
896.28 |
|
|
Jabsco Pump 12V 1B Clutch
FEATURES
Pump Body:
Bronze
Port Size:
11860-Series, 1" NPT Internal
11870-Series, 1-1/4" NPT Internal
Electric:
12V, 24V or 32V
Pulley:
Single B groove or Double A groove
Impeller:
Nitrile
Shaft Seal:
Mechanical Carbon-Ceramic, Face Type
Shaft:
Stainless Steel
Bearings:
Shielded Ball Bearings
APPLICATIONS / CHARACTERISTICS
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.
MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.
INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.
FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.
Jabsco- Electric Clutch Pump 12V, 1" NPT Ports, 1 Groove "B" Belt Pulley
|
896.28 |
|
|
Jabsco Pump 11870-0006 Electric Clutch 24V
Pump Body: Bronze
Port Size: 1-1/4" NPT Internal
Electric: 24V
Pulley: Single B groove or Double A groove
Impeller: Nitrile
Shaft Seal: Mechanical Carbon-Ceramic, Face Type
Shaft: Stainless Steel
Bearings: Shielded Ball Bearings
APPLICATIONS
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.
MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.
INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.
FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.
Jabsco Electric Clutch Pump 24V, 1-1/4" NPT Ports, Double "A" Groove Pulley
|
1601.83 |
|
|
Jabsco 11870-0007 Electric Clutch Pump 32V
Pump Body: Bronze
Port Size: 1-1/4" NPT Internal
Electric: 32V
Pulley: Single B groove or Double A groove
Impeller: Nitrile
Shaft Seal: Mechanical Carbon-Ceramic, Face Type
Shaft: Stainless Steel
Bearings: Shielded Ball Bearings
APPLICATIONS
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.
MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.
INDUSTRIAL: Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.
FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.
Jabsco Electric Clutch Pump 32V, 1-1/4" NPT Ports, Double "A" Groove Pulley
|
1569.71 |
|
|
Jabsco Pump 5320-0011 which replaces Westerbeke 11830
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and has vertically oriented ports 5.8 gpm (22 lpm) at 10 ft. (3m) total head at 1750 rpm Self-priming to 10 ft. (3m) vertical lift
Fitting: 3/8 in. NTP
Size: 5 15/16 long x 3 1/2 wide x 3 5/18 in. high
Weight: 1 1/2 lbs. (0.7 kg)
Pump with neoprene impeller, full cam, and lip seal
Replaces Westerbeke 11830
FEATURES
Pump Body: Bronze pedestal
Port Size: 3/8" NPT vertical
Flow: 7.3 GPM at 10 feet of head, 2100 RPM
Pressure: Max 17.3 PSI at 40 feet of head, 2100 RPM
Impeller: Neoprene
Shaft Seal: Lip Type
Shaft: Steel
MARINE Pumping bilges, washdowns. Circulating water in bait tanks. Utility dockside pump. Circulating engine raw water.
INDUSTRIAL Circulating and transferring liquids. Velocity-mixing. Pumping coolants on machine tools. Returning spilled liquids to process. Pumping waste water to sewer. Cellar, yards and sump drainage. Chemical manufacturers and pharmaceutical houses- to pump soap, liquors, ink, dyes, medicines, alcohol, various acids, tanning liquors, glycerine, lotions, brine, etc.
|
780.47 |
|
|
Oberdorfer 405M-04 Pump Peo G/P Sewage
FEATURES
Pump Body:
Bronze
Ports:
1" NPT and 1 1/2" Hose
Flow:
24 GPM at 20 feet of head
Impeller:
Neoprene Standard, Buna Optional
Shaft Seal:
Mechanical
Shaft:
Stainless Steel
Motor / Drive:
Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.
APPLICATIONS / CHARACTERISTICS
RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED
Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.
Oberdorfer Flexible Impeller Utility Pump Head Only, 1"NPT Ports, Neoprene Impeller
|
783.00 |
|