|
AL7211CR
The AL7211CR (1-3/8"ID) is the perfect holder for boats in the 16 to 31 ft range. Its economical price and small footprint (3"x 5") make it our most popular center rigger holder. The receiving tube of this marine grade anodized holder is set at a 45 degree angle. This is the perfect angle for boats where the mounting position is low and the cockpit is not extremely deep (e.g. mounting on T-Tops, Hard Tops, or Fly-Bridges). Compatible poles are 12 or 14ft in length and come standard in bright silver anodized finish with a Black Spike.
Recomended poles for AL7211CR
AO8712CR - 12 ft Center Rigger (Mk II)
AO8714CR - 14 ft Center Rigger (Mk II)
MX8712CR - 12 ft MX Step- Tube Style
|
108.00 |
|
|
AL7301CR
Fits 1.050" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7302CR
Fits 1.315" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7303CR
Fits 1.660" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7304CR
Fits 1.900" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
MX Pro Series Fixed Angle Center Rigger Holder - 45° - 1.5" ID - Bright Silver
The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.
MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired
Slightly larger footprint (5"x 7")
Ruggedly constructed from marine grade anodized aluminum
Can be easily attached above or below the standing platform or any flat surface
Anodized in Bright Silver it is as strong as it is attractive
|
261.70 |
|
|
MX Pro Series Fixed Angle Center Rigger Holder - 22° - 1.5" ID - Bright Silver
The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.
MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired
Slightly larger footprint (5"x 7")
Ruggedly constructed from marine grade anodized aluminum
Can be easily attached above or below the standing platform or any flat surface
Anodized in Bright Silver it is as strong as it is attractive
|
261.70 |
|
|
MX Pro Series Fixed Angle Center Rigger Holder - 30° - 1.5" ID - Bright Silver
The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.
MX Pro Series (1-1/2"ID) is the solution for boats with a tower or when a lower angle is desired
Slightly larger footprint (5"x 7")
Ruggedly constructed from marine grade anodized aluminum
Can be easily attached above or below the standing platform or any flat surface
Anodized in Bright Silver it is as strong as it is attractive
|
261.70 |
|
|
Center Rigger Holder - 1-5/16" IPS Pipe - 1-1/8" Holder
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. Fits 1" Pipe Size.
|
88.03 |
|
|
MX7000CR
Adjustable Angle holders MX7000CR (1-1/2" ID) are our strongest and most versatile holders. The three point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2" x 18".
Recomended poles for MX7000CR
AO8716CR - 16 ft Center Rigger (Mk II)
AO8718CR - 18 ft Center Rigger (Mk II)
MX8712CR - 12 ft MX Step- Tube Style
MX8715CR - 15 ft MX Step- Tube Style
MX8718CR - 18 ft MX Step- Tube Style
MX8716CX - 16 ft MX Step- Tube Style - Single Spreader
MX8720CX - 20 ft MX Step- Tube Style - Double Spreader
|
502.62 |
|
|
Fixed Center Rigger Base
This fixed center rigger mount is a top quality welded assembly, highly polished and anodized to match your vessel's tower. Fixed angle set at 21 degrees. Accepts any center rigger pole with outside diameter of 1.50".
|
288.89 |
|
|
Center Rigger Clamp-On System
For multiple lines in the water.
Features:
Clamp-on center rigger holder 1-1/8" OD base
Tigress Track® telescoping center rigger
Center rigger kit
Holder sized to fit 1-5/16" schedule pipe
Specifications:
Mount: 1-1/8" clamp-on
Clamp Size: 1-5/16"
Outrigger: 8" Silver XD
Rigging Kit: Center
|
305.83 |
|
|
Center Rigger Clamp-On System
For multiple lines in the water.
Features:
Clamp-on center rigger holder 1-1/8" OD base
Tigress Track® telescoping center rigger
Center rigger kit
Holder sized to fit 1-5/16" schedule pipe
Specifications:
Mount: 1-1/8" clamp-on
Clamp Size: 1-5/16"
Outrigger: 8" Black XD
Rigging Kit: Center
|
305.83 |
|
|
Rod Holder - Medium - 0° - Stainless Steel
The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
|
90.68 |
|
|
Rod Holder - Heavy Duty - 0° - Stainless Steel
The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
|
129.23 |
|