|
AMT 4942-99, Rotary Drum Pump
ROTARY DRUM PUMP
Type: Rotary
Inlet: 1"
Outlet: 1"
Bung Adapter: Yes
Construction: Ryton
Seal: Teflon
|
208.85 |
|
|
AMT Pump 5272-98 SS Rotary Drum Pump
Drum Pump, Stainless Steel, 1" NPT Suction x 3/4" NPT Discharge Port
Rotary drum pump for transfer of chemicals and liquids including many acids, acetones, trichloroethylene, solvents, photographic chemicals and ketones.
Hand-operated rotary lever action
304 stainless steel construction with carbon vanes and a Teflon (PTFE) seal for resistance to chemicals and corrosion
Flow rate of 12 oz. per stroke (5 gpm at 70 rpm)
1" female NPT inlet port and 3/4" female NPT outlet port
|
736.60 |
|
|
AMT Pump HP02-99-09 Piston Drum Pump 3/4 Poly
Model HP02-99 Features:
Polypropylene Construction with Kynar Seals and Ryton® Piston Ring
Delivers 13 oz. per Stroke
Polypropylene Construction with Stainless Steel Components
• Kynar Seals and Ryton® Piston Ring
• Maximum Temperature 130° F
• 13 oz. per Stroke
• 3/4" NPT Discharge Port
• 3/4" x 40" Polypropylene
Suction Tube Assembly
• 2" Polypropylene Bung Adapter
Polypropylene Drum pump is designed for transfer and dispensing of liquids within a pH range of 4 to 11. Liquid types include many organic acids, alcohols and water soluble inorganic chemicals, which are compatible with pump component materials.
|
204.46 |
|
|
Amt 2850-99 Cast Iron 1 1/4" Self Priming Pedestal Pump
AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000.
• Cast Iron & Stainless Steel Construction
• Buna-N Mechanical Seals on Cast Iron Models
• Viton® Mechanical Seals on Stainless Steel Models
• Optional Silicon Carbide Mechanical Seals Available
• 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes
• Dual Volute Design Reduces Radial Load on Motors
• Maximum Temperature
◆ Buna-N 180° F
◆ Viton® 200° F
• Self-Cleaning, Semi-Open Impeller
• Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
|
41.92 |
|
|
AMT 5750-99, Piston Drum Pump 1" NPT Discharge Port
PISTON DRUM PUMP
• All Polyethylene Construction
• Upper Temperature Rating: 158 degrees fahrenheit
|
74.59 |
|
|
AMT Pump 4822-95 Rotary Hand Pump
AMT Rotary Drum Pump
1" Suction & 3/4" Discharge
Buna-N Shaft Seal
Includes: Bung Adapter & Suction Tube Included
Material: Cast Iron
|
133.38 |
|
|
AMT Pump MSV3-5-1P Multistage Mtr/Pmp 1Hp 115v
Multi-Stage Booster Pump – MSV3-5-1P, 5-Stage, 115-208-230 Volts
NEMA 56C, Dual Cycle 50 and 60 Hz, 1.0 HP, single phase, Totally Enclosed, Fan Cooled motor
Recommended to operate at or below the Best Efficient Point which is at 16 GPM and a Max Total Head of 105 feet
Cast Iron base and adapter
1 inch NPT cast iron flanges
304 series stainless steel components with Teflon wear rings
EPDM-Tungsten Carbide Seal that is easy to remove and replace
The AMT MSV3-5-1P is a non-self-priming/gravity feed, industrial pump with high pressure and low output. This unit is more commonly referred to as a jockey pump and is often installed for water transfer uses where no suction lift is required such as boiler feed, condensate return, high pressure washdown, irrigation, booster service, and fire protection/sprinkler systems. These pumps have NOT been investigated for use in drinking water systems.
|
1465.20 |
|
|
AMT Pump 3891-99 Threaded Shaft Pedestal
|
251.85 |
|
|
AMT Pump 4821-95 Rotary Hand Pump Cast Iron
Heavy-duty Cast Iron body with Buna-N seal
5 GPM @70 RPM (11 oz./stroke)
Carbon vanes
0.75" suction x 1" discharge ports
0.75-Inch NPT steel discharge spout assembly (included)
1-Inch NPT x 40-Inch steel suction tube assembly (included)
2-Inch Cast Iron Bung adapter
Maximum Temperature 160F
Self-Priming
Capable of handling compatible fluids with a maximum of 5,000 SSU viscosity at a minimum of 70 degrees F liquid temperature (roughly equivalent to SAE 40 motor oil)
Liquids must be free of debris and solids for proper operation
|
83.37 |
|
|
Amt 5351-95, Cast Iron Coolant Pump 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts 0.8/0.4 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 56 GPM and 26 PSI
3/4" FNPTOutlet
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
507.94 |
|
|
AMT 5390-95, Immersion Coolant Oil Pump 23gpm 115volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motors (TEFC)
115/230 volts, 3.0/1.5amps
Single or Three Phase Motors
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
1/2 inch FNPT Ports
Delivers up to 23 GPM and 26 PSI
Replacement For The Following Standard Machine Tool Industry Pumps
Fuji: VKP-063A
Old Fuji: VKN-061A
Mitsubishi: NQ100J
Toshiba: OPF-100M
Hitachi: CPD-100M
Yasukawa: VFPC-100
Graymills: IMV-25
Gusher: VBV-14
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
|
502.04 |
|
|
AMT 5391-95, Immersion Coolant Oil Pump 23gpm 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS
Cast Iron Construction
1/4 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
Fluid Port: 0.5"
HP:1/4
Impeller Material: Stainless Steel
GPM: 23
Replacement for Standard Machine Tool Industry Pumps
Fuji: VKP-063A
Old Fuji: VKN-061A
Mitsubishi: NQ100J
Toshiba: OPF-100M
Hitachi: CPD-100M
Yasukawa: VFPC-100
Graymills: IMV-25
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
487.69 |
|
|
AMT 3201-96, Laundry Tray Pump 1/4 HP 115V
GENERAL PURPOSE LAUNDRY TRAY PUMP
Cast Aluminum Construction
Buna-N Mechanical Seal and O-Ring
1-1/4" NPT Suction and Discharge Port
Self-cleaning, Semi-open Impeller
Continuous Duty Motor 1725 RPM, 1/4 HP 115VAC Single Phase Open Drip Proof (ODP) 48Z Frame
The AMT Laundry Tray pump is a single stage, multi-vane open impeller unit. It is designed as a laundry tray pump but can be used for most gravity fed general service pumping applications. The open impeller design makes it particularly adaptable to dirty as well as clean liquids and is inherently resistant to clogging.
The AMT Laundry Tray pump is readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
282.56 |
|
|
AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm
INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS
1/8 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts, 0.3/0.19 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 10 GPM
3/8 inch outlet diameter
Able to pump liquid down to 2 inches
Replacement for to following Standard Machine Tool Industry Pumps
Fuji: VKP-053A
Old Fuji: VKN-051A
Mitsubishi: NQ-60J
Toshiba: OPF-60M
Hitachi: CPD-060M
Yasukawa: VFPC-061DIF
Graymills: IMV-08
Gusher: VBV-18
|
250.97 |
|
|
AMT Pump 2P7XZR Hatz Diesel Fire Pump
2" Engine Driven Portable High Pressure pump is cast aluminum construction with cast iron volute and male NPT ports. Pump applications include fire protection and irrigation. These pumps are available with a wide choice of standard and heavy duty gasoline or diesel fueled engines. These pumps feature high efficiency closed cast aluminum impeller. All models come equipped with EPDM/EPR elastomers and seals. Most models include a heavy duty steel roll frame.
Features
Removable/Replaceable Cast Iron Suction & Discharge Flanges
Discharge Port Rotates in 90 Increments
One Tool Serviceability, Tool Included with Engine Driven Models (Not with Kits)
Includes Strainer and Rubber Foot Mounting
Maximum Temperature 180 F
Specifications
Type: High Pressure Pumps
Series: 2" Engine Driven Portable High Pressure Pumps
Driver: Hatz Diesel 1B30
Seal Type & Elastomer/Faces: EPDM/EPR/CAR/CER
Tank Size (Gal/Ltr): 1.32 / 5.0
Run Time (Hr.): 2.7
Mounting: Roll Cage
HP: 5 HP
SUCTION: 2" NPT
DISCHARGE: 2" NPT
L 31" X W 22.5" X H 23.6"
Warranty: 1 Year
Product images are a representation only
|
6150.23 |
|