|
Cat Pump 76056.3FR Bell Housing
Cat Pumps Direct-Drive Bell Housings provide a compact direct mounting feature resulting in reduced space requirements compared to belt or gearbox assemblies. Bell Housings also eliminate the need for belt selection, sizing, and adjustment. For a complete drive package, combine with Cat Pumps Flexible Couplings designed for extended life in high temp and high RPM conditions.
Model 76056.3FR Bell Housing adapts to Cat Pumps 3 Frame plunger pumps and mounts directly to 56C - 145C motors. Refer to the data sheet for proper selection and more detailed information.
Technical Specifications
Accessory Type: Bell Housings
Description: 3FR Series to 56C-145TC NEMA Motor
|
138.58 |
|
|
Cat Pump 3520 35 Pfr Pump 35Gpm 2K Psi
CAT Pumps 3520 is a triplex plunger pump designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Perfect for use in continuous duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and more. Exclusive high pressure seal design means seals are lubricated and cooled by the solution being pumped. Features 304SS valve assemblies and NBR (Buna-N) seals and O-rings.
Dimensions: 23.86 X 18.11 X 9.72
Features
Triplex design delivers high efficiency and low pulsation.
Durable dual V-Packings are lubricated and cooled by pumped liquid.
Pre-set Lo-Pressure seals provide secondary protection against external leaks and require no packing adjustments.
Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
Specially formulated Seals and V-Packings offer unmatched performance and extended life.
Interchangeable inlet and discharge valves for easy servicing.
Wet-end easily serviced without entering crankcase.
Specifications
Maximum Flow: 25 GPM
Maximum Pressure: 2000 PSI
Maximum Temperature: 140° F
RPM: 870
Inlet Port: 1.5" NPT-F
Outlet Port: 1" NPT-F
|
7349.88 |
|
|
Cat Pump 1K303 Submersible Pumps
1K Series – Submersible Sump Pumps Stainless steel submersible sump pumps offer solutions to pumping semi-dirty water or fresh water with suspended solids up to 3/8".
Flow Range Up to 88 gpm Pressure Range (up to 24 PSI) 55 ft. Head RPM 3450 rpm Discharge Fitting 1-1/4", 1-1/2" NPT(F) Horsepower 1/3, 1/2, 3/4, 1, 1-1/2 HP Operation Manual or Automatic Maximum Temperature Continuous 122°F Intermittent 140°F Maximum Solids Diameter 3/8"
|
1267.20 |
|
|
Cat Pump Flange Mount
Use the CAT Pumps 8021 Assembly to safely mount a 3-frame pump. This is an OEM CAT Pumps accessory.
Used with CAT Pumps 230, 240, 270 pump models
Genuine CAT Pumps component
|
121.68 |
|
|
Cat Pump 89778 Stud
CAT Pumps 89778 Retainer Stud is made with 316 stainless steel and fits on 3535, 3545, and other 35FR pumps.
Compatible with 35-frame pumps
316 stainless steel construction
M7 x 135
Genuine CAT Pumps OEM factory part - guaranteed fit and function
Use With These Pumps:
3501
3501C
3507
3507C
3511
3511C
3517
3517C
3520
3520C
3527
3531D
3531C
3535
3535C
3537
3541C
3541D
3545
3547
3570
3570S
3570C
|
29.84 |
|
|
Cat Pump 310 Plunger Pump 5 Frame
This pump is made for continuous duty operation. It requires little to no maintenance and is great for many cycles of a car wash. This triplex designed pumps offer high efficiency and low pulsation. Mounting kits and rails are not included and must be ordered separately.
Pump Features
Lubricated high pressure seals are durable and cooled by pump liquid
Double protection provided by pre-set lo-pressure seals that prevent external leaks
No packing adjustment required
Drive type: belt
Pump Technical Specs
Max Flow: 4 GPM
Pressure Range: 100 - 2200 PSI
Inlet Pressure Range: -5 to 60 PSI (-0.35 to 4 bar)
RPM: 950
|
1059.84 |
|
|
Cat Pump 44084 Retainer
CAT Pump 44084 is a replacement 10mm plunger retainer for CAT 3535 pumps. Genuine CAT replacement part, guaranteed to fit. Use to replace damaged, missing, or worn plunger retainer during maintenance or repairs.
Exact replacement part, don't have to worry about tweaks or adjustments
OEM parts guarantee use of correct materials for increased longevity
OEM parts come with manufacturer support
Check with pump manual to ensure correct part number
|
98.02 |
|
|
Cat Pump 280.0110 Piston Pump 3 Frame
This triplex (three piston rods) positive displacement, reciprocating piston pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, and chrome-plated 304 stainless steel sleeves and cylinders. Multiple piston cup and seal configurations are available with NBR (Buna-N) O-rings.
The lower RPM belt drive design provides strong inlet suction and long-lasting pump and seal life.
Technical Specifications
Max Flow: 3 gpm / 11.4 lpm
Max Pressure: 1000
Inlet Port Size: 1/2" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1330
Drive Type(s): Belt, Clutch
Material: Brass
|
995.76 |
|
|
Cat Pump 430.011 Piston Pump 4 Frame
This triplex (three piston rods) positive displacement, reciprocating piston pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, and chrome-plated 304 stainless steel sleeves and cylinders. Multiple piston cup and seal configurations are available with NBR (Buna-N) O-rings.
The lower RPM belt drive design provides strong inlet suction and long-lasting pump and seal life.
Technical Specifications
Max Flow: 5 gpm / 18.9 lpm
Max Pressure: 1000
Inlet Port Size: 1/2" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1040
Drive Type(s): Belt, Clutch
Material: Brass
|
1355.76 |
|
|
Cat Pump 6775-ADP Plunger Pump 60 Frame
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with chrome-plated nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Technical Specifications
Max Flow: 75 gpm / 283.9 lpm
Max Pressure: 1200
Inlet Port Size: 2" NPT(F)
Discharge Port Size: 1 1/4" NPT(F)
RPM: 650
Drive Type(s): Belt
Material: Brass
Ships by Truck Only
|
22320.32 |
|
|
Cat Pump 781 Sfbh Ss Constructn Buna-N
The CAT Pump 781 | CAT Plunger Pump, 3/8" Discharge Port, 1/2" Inlet Port, 4.5 GPM, 5000 PSI Rating, 1700 RPM, 316 Stainless Steel, Belt Drive.
|
6497.04 |
|
|
MP Pump
MP Pumps was organized in Detroit in 1942, shortly after America’s entry into World War II. Our first pumps were used in landing craft and other amphibious vehicles where quality and reliability were absolutely essential. After the war, we continued to grow along with our reputation for superior design, engineering and manufacturing of centrifugal pumps for wide variety of applications.
Industrial Pumps, Transportation Pumps, Agriculture Pumps, Marine Pumps, Petroleum Pumps & DEF Pumps.
|
|
|
CAL PUMPS
A/C Circulation Pump - Air Conditioning & Cooling - Air Conditioning - Seawater Circulation Pump - Magnetic Drive Small Pond Pump
CAL customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. Four different models are offered at CLR Marine with flow rates from 320 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 110°F!
6' power cords are standard.
Features & Benefits of the CAL PUMPS:
One year warranty
UL Listed for consumer confidence
Premium stainless steel and bronze construction for longevity
Six or twenty foot power cord for convenience
Suitable for fresh or salt water applications
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air
Corrosion resistant
115 or 220 volt motors
Thermally protected
Optional Mounting Bracket Available (model MSUB OR MSUBM)
Do Not Run Dry
Operate horizontal or volute down
MS320 have ½” MNPT intake and ¼” MNPT discharge
MS580, 900, 1200 have ¾” MNPT intake and ½” MNPT discharge
Cal 1200 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS1200
Cal 900 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS900
Cal 580 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS580
Cal 320 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS320
See all Cal Pump Products
S T A I N L E S S S T E E L & B R O N Z E P U M P S
Model
AMPS
(MIN/MAX)
WATTS
(MIN/MAX)
MAX
FLOW
MAX
HT.
1'
3'
5'
7'
9'
11'
13'
15'
17'
MS320
1.05-1.30
68-89
375
12.7'
360
335
305
262
215
-
-
-
-
MS580
2.15-2.55
138-203
860
14'
830
750
675
580
475
345
125
-
-
MS900
2.17-2.76
156-234
885
16'
855
790
725
650
560
460
350
175
-
MS1200
2.97-3.79
208-312
1100
18'
1070
1000
925
850
760
675
560
425
225
Cal Pumps at CLR Marine
|
|
|
Jabsco 31800-0092 Series Industrial Diaphragm Pump
Pump Body:
Glass Filled Polypropylene, Four Piston, Diaphragm Pump
Port Size:
Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread
Flow:
4 GPM/15 LPM
Pressure:
Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C).
31800 Series: No Switch
31801 Series: Cut-In 20 PSI, Cut-Out 40 PSI.
Elastomers:
Diaphragm: Santoprene
Valves: Viton
Motor:
Permanent Magnet with Thermal Overload Protection. Continuous duty at 15 psi (1 bar) and 70°F (21°C) ambient temperature.
APPLICATIONS
Self-Priming to 10 ft. (3 m) (wet) 5 ft. (1.5m) (dry). Runs Dry Without Damage. Smooth Flow. Snap-in Ports. Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C). Viscosity: 250 cP maximum.
CONSTRUCTION – Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems. Superior equipment washdown results can be enjoyed with the 30801-Series pumps.
AGRICULTURAL – Supply pump for herbicide and pesticide sprayers and sprayboom equipment.
INDUSTRIAL – Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.
NOTE: Viton equipped models are not suitable for potable water applications.
Jabsco Industrial Diaphragm Pump 12Volt No Switch
|
303.23 |
|
|
Jabsco 31801-0092 Series Industrial Diaphragm Pump
Pump Body:
Glass Filled Polypropylene, Four Piston, Diaphragm Pump
Port Size:
Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread
Flow:
4 GPM/15 LPM
Pressure:
Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C).
31800 Series: No Switch
31801 Series: Cut-In 20 PSI, Cut-Out 40 PSI.
Elastomers:
Diaphragm: Santoprene
Valves: Viton
Motor:
Permanent Magnet with Thermal Overload Protection. Continuous duty at 15 psi (1 bar) and 70°F (21°C) ambient temperature.
APPLICATIONS
Self-Priming to 10 ft. (3 m) (wet) 5 ft. (1.5m) (dry). Runs Dry Without Damage. Smooth Flow. Snap-in Ports. Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C). Viscosity: 250 cP maximum.
CONSTRUCTION – Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems. Superior equipment washdown results can be enjoyed with the 30801-Series pumps.
AGRICULTURAL – Supply pump for herbicide and pesticide sprayers and sprayboom equipment.
INDUSTRIAL – Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.
NOTE: Viton equipped models are not suitable for potable water applications.
|
309.02 |
|