|
FINISH THOMPSON M6 AIR MOTOR
Model
Certification
Requirements
Output
(KW)
RPM
Maximum
Viscosity
M6
CE
80-100psi@15-32cfm
400
300-9,000
For use with Finish Thompson Inc. FTI drum pumps. Drum pump motors are available as electric or air pneumatic motors. Most motors and drum pump tubes are interchangeable. Simply disconnect one from the other.
CAUTION: When pumping flammables, use only air or explosion-proof electric motors on stainless steel (DO NOT PLASTIC TUBES) without the static protection kit .
Non-electrical air operation means the possibility of explosion from igniting flammable gases is reduced.
Please allow about two weeks for delivery.
|
467.81 |
|
|
FINISH THOMPSON M6 AIR MOTOR
Model
Certification
Requirements
Output
(KW)
RPM
Maximum
Viscosity
M6X
CE
80-100psi@15-32cfm
600
300-9,000
For use with Finish Thompson Inc. FTI drum pumps. This drum pump motor is a air pneumatic motor. Most motors and drum pump tubes are interchangeable. Simply disconnect one from the other.
CAUTION: When pumping flammables, use only air or explosion-proof electric motors on stainless steel (DO NOT PLASTIC TUBES without the static protection kit.)
Non-electrical air operation means the possibility of explosion from igniting flammable gases is reduced.
Air motor performance will depend upon user's compressor and system setup.
Please allow about two weeks for delivery.
|
581.25 |
|
|
FINISH THOMPSON DB22-P
Finish Thompson DB22P Pump End Only FTI DB22 Magnetic Drive Centrifugal DB Series Sealless Pumps, 2" Suction, 2" Discharge, FKM O-Ring, Polypropylene, 221 GPM, 90 PSI Max Pressure, 201 Max Feet of Head.
Bushing: Carbon
Connection Type: NPT
Discharge NPT (Inches): 2"
Heads To (Feet): 201
Impeller Size (Inches): 7.25" (7 1/4")
Magnet: 8-pole
Material:Polypropylene (PPG)
Maximum Flow (GPM): 221
Maximum Operating Temperature: 180°F (82°C)
Maximum Pressure (PSI): 90 PSI
Motor Frame Size: 184TC
Pressure Rating BAR: 6.2 bar
Spec. Gravity: up to 1.8
Suction NPT (Inches): 2"
Valve/Seat/O-Ring: FKM
Applications
Chemical transfer
Anodizing
Rinse water & waste water
Pickling chemicals
Pulp and paper
|
3788.96 |
|
|
FINISH THOMPSON TTC-40 PUMP FOR CORROSIVES
Sealed, Medium Viscosity/Flow
TT Series pumps offer light to medium viscosity fluid handling. Drum pumps in this series are ideal for liquids containing small particulate or solvents.
Features include:
316 stainless steel or CPVC tube materials
Tubes interchangeable with motors
Up to 2000 cP with M6X air motor
Available Lengths:
27, 40, 48 in (69, 102, 122 cm)
Tube Diameter:
1-5/8 in (4.1 cm)
Discharge Size:
1 in (2.54 cm)
Discharge Types:
Hose barb
Hose Size:
1 in (2.54 cm)
Electric Motor
Air Motor
Maximum Flow:
10 gpm (38 lpm)
16 gpm (61 lpm)
Maximum Head:
10 ft (3 m)
30 ft (9 m)
Maximum Specific Gravity:
1.8
1.8
Maximum Viscosity:
500 cP
2000 cP
Tube Material:
CPVC
Shaft Material:
Alloy 625
Spacer Material:
FEP
Impeller/Compressor Material:
PTFE with stainless steel pin
Maximum Temperature:
150º F (66º C)
Minimum Temperature:
34º F (1.1º C)
|
984.60 |
|
|
FINISH THOMPSON DB7V-T PUMP END, PVDF/TEFLON 56C
Pulp & Paper
Chemical Processing
Heat Exchanger
Circuit Board Printing
Magnetic Drive Pump, 3/4 HP,
Voltage 208-230/460,
Full Load Amps 2.4-2.3/1.15, 1-1/2 In.
FNPT Inlet, 1-1/2 In.
MNPT Outlet,
Motor Type Induction, Motor Enclosure TEFC,
69 GPM of Water @ 3 Ft. of Head,
69 GPM of Water @ 6 Ft. of Head,
69 GPM of Water @ 9 Ft. of Head,
64 GPM of Water @ 15 Ft. of Head,
58 GPM of Water @ 18 Ft. of Head,
50 GPM of Water @ 24 Ft. of Head,
Length 17-19/64 In.,
Width 7-1/2 In.
|
1107.90 |
|
|
FINISH THOMPSON DB6V-T PUMP END PVDF/TEFLON 56C
|
1085.40 |
|
|
FINISH THOMPSON DB8V-T PUMP END, PVDF/TEFLON 56C
|
1133.10 |
|
|
FINISH THOMPSON DB9V-T PUMP END, PVDF/TEFLON 56C
|
1143.90 |
|
|
FINISH THOMPSON DEFP004 DRUM PUMP 48" POLY/316
|
331.50 |
|
|
FINISH THOMPSON DEPP001 DRUM PUMP 27" POLY/316
|
160.88 |
|
|
FINISH THOMPSON GP22PEB016018 2" POLY PUMP SEALED 184 JM
|
1931.40 |
|
|
FINISH THOMPSON GP22PEB01601806 2" POLY PUMP 184JM 5HP 230-
|
3450.86 |
|
|
FINISH THOMPSON A101470 ADAPTER
Finish Thompson A101470 Motor Adapters
Adapts FTI pumps to Lutz, Standard or Flux motors
FTI to Lutz/Standard - PVC FTI Pump Motor Adapters
|
177.84 |
|
|
FINISH THOMPSON A101521 STATIC PROTECTION KIT
Static Protection Kit
Finish Thompson’s Static Protection Kit (SPK) is recommended to help prevent the accumulation of static charge when transferring flammable or combustible liquids. It is to be used in conjunction with stainless steel drum pumps and air or explosion-proof electric motors.
When pumping flammables at high flow rates, a static charge can build up due to the high velocity at which the fluid is moving. Static charge can become a spark capable of igniting flammable liquids. This is rare occurrence, but it is wise to prevent the possibility by using the SPK. Keeping the velocity of the liquid low significantly reduces these hazards. Our metal tube pumps combined with an appropriate motor and static protection kit is an engineered package designed to provide customers with a high level of protection when pumping flammable liquids.
The SPK is a conductive, 4-foot long x 1-inch I.D. cross-linked polyethylene discharge hose with grounding cables to bond the pump, motor, hose and receiving drum. It will also limit the pumps output velocity to 3-feet/second maximum (about 7 gpm through a 1’’ hose), which will reduce static build up.
|
327.60 |
|
|
FINISH THOMPSON DB10P PUMP END POLY/CARB/VIT/56C
Applications
Water and wastewater
Electronics
Pharmaceuticals
Wet scrubber
Pulp and paper
Finish Thompson DB Series Pump
FTI's DB Series Magnetic Drive Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications.
Finish Thompson Pumps: Centrifugal - DB10 Model
Motor @ 3450 RPM:
0.33 HP
Motor @ 2900 RPM:
0.34 kW
Max specific gravity:
1.8
Suction Port:
1.50 in
Discharge Port:
1.50 in
Impeller Diameter:
3 in (8.9 cm for 50 Hz model)
Impeller Type:
Closed
@ 3450 RPM
@ 2900 RPM
Max flow
67.0 gpm
16.9 m3/hr
Max head
28.0 ft
9.8 m
Type:
Sealless
Configuration:
Horizontal
Motor frame:
56C, 145TC, 63, 71, 80, 90, w/B14 or B5
Connection type:
NPT, BSP, Flange, Union
Magnet set:
6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW)
Max pressure:
80 psi
Construction materials:
Glass-filled Polypropylene, Carbon-filled PVDF
O-ring Material:
Viton, EPDM, Simriz®, Kalrez®
Bushing Material:
Carbon, PTFE, Ceramic, silicon carbide
PART NO.
DESCRIPTION
DB10P
Pump End (PP)
DB10PW
Wet End (PP)
DB10V
Pump (PVDF)
DB10VW
Wet End (PVDF)
|
929.70 |
|