Jabsco 50860-0024 Cyclone Hi-Pressure 24V Jabsco High Pressure Centrifugal Cyclone Pumps are designed for circulation applications such as hot water systems, livewell or bait tank installations.   Features: Heavy-duty robust stainless steel construction Only one tool required for routine servicing (3/8" spanner) Virtually silent running centrifugal pump Long-life DC motor Head rotatable in 90° segments Anti-clogging impeller design Long-life mechanical seal Recommended intermittent duty: Max. 30 minutes On / min. 30 minutes Off Pump can be mounted on any flat surface Pump can be run dry for short periods of time ISO 8846 MARINE and USCG requirements for ignition protection. ISO 8849 MARINE Bilge Pump Standard.   Specifications: Jabsco Model No. 50860-0024 Flow Rate: 21 GPM Pressure:up to 1.3 bar (19psi) Impeller:Stainless Steel Anti-clog impeller design.   Shaft Seal: Mechanical Port Size: 3/4" Nominal Voltage: 24 Volt DC Max. Current Draw: 10.5 Amps Recommended Fuse: 15 Amp   Jabsco- Cyclone SS Centrifugal Pump Hi-Pressure 24Volt 3/4"NPT 21GPM 19psi

Jabsco 50860-0012 Series SS Cyclone Circulation Pump Pump Body: Stainless Steel Port Size: 3/4" pipe threads. Available with NPT or BPS threads. Flow: 80 Litres/min (21.1 USgallons/min) Pressure: up to 1.3 bar (19psi) Impeller: Stainless Steel Anti-clog impeller design. Shaft Seal: Mechanical Motor: Max. 30 minutes duty (Min. 30 minutes off). ISO 8846 MARINE and USCG Regulations for Ignition Protection • ISO 8849 MARINE Bilge Pump Standard.     APPLICATIONS Silent running. Single tool servicing. 2m (6 foot) suction lift when wet. A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations   Jabsco Cyclone SS Centrifugal Pump Hi-Pressure 12Volt 3/4"NPT 21GPM 19psi

JABSCO 50836-0024 KIT MOTOR (CYCLONE LP 24V)

Jabsco 59400-0024 Hydro Air Bilge Switch 24V  

Jabsco 17820-0024 Oil Change Sys 24V   FEATURES Pump Body: Bronze Port Size: Valves: 1/2" NPT Full Flow Ball Type Impeller: Nitrile Shaft Seal: Buna Lip Seal Motor: Reversible Permanent Magnet With Integral Reversing Switch; Complies with USCG 183.410 and ISO 8846 Marine. CE Rated.     APPLICATIONS / CHARACTERISTICS The Jabsco Oil Change System is designed to be installed in a vessel’s engine room with its manifold and valves permanently plumbed to the vessel’s engines’ oil pans or transmissions’ oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve.     Jabsco Oil Changer System 24V 5 Ports  

Jabsco 17830-0024 24V Porta-Quick Flex Impeller Pump Pump Body: Bronze Port Size: 3/8" NPT Impeller: Nitrile Shaft Seal: Buna Lip Type Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).    APPLICATIONS  The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.     Jabsco Flexible Impeller Oil Change Pump 24V Reversible  

Jabsco Pump 11870-0006 Electric Clutch 24V Pump Body: Bronze Port Size: 1-1/4" NPT Internal Electric: 24V Pulley: Single B groove or Double A groove Impeller: Nitrile Shaft Seal: Mechanical Carbon-Ceramic, Face Type Shaft: Stainless Steel Bearings: Shielded Ball Bearings    APPLICATIONS This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation. MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.   INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc. FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.   Jabsco Electric Clutch Pump 24V, 1-1/4" NPT Ports, Double "A" Groove Pulley      

Jabsco 18330 Series Electric Clutch Pump FEATURES Pump Body: Bronze Port Size: 2" NPT Flow: 83 GPM at 10 feet of Head, 1750 RPM Impeller: Nitrile Shaft Seal: Mechanical, Carbon-Ceramic Shaft: Brass Pulley: 7" Diameter APPLICATIONS SELF PRIMING PEDESTAL MOUNT ELECTRIC CLUTCH PUMP   MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.   INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals,pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine. brine. etc.   FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for dewatering and draining meter boxes, manholes, excavations and emergency pumping.   18330-0001 is Jabsco Electric Clutch Pump 24V, 2" NPT Ports, Double "A" Groove Pulley  

Jabsco 30450-0024 24Vdc Water System Pump  

Jabsco 11870-0046 Clutch Pump 1 1/4" Ports 24V Pump Body: Bronze Port Size: 1-1/4" NPT Internal Electric: 24V Pulley: Single B Groove Pulley Impeller: Nitrile Shaft Seal: Mechanical Carbon-Ceramic, Face Type Shaft: Stainless Steel Bearings: Shielded Ball Bearings   APPLICATIONS This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.   MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.   INDUSTRIAL: Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine . FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.   Jabsco Electric Clutch Pump 24V, 1-1/4" NPT Ports  

Jabsco Pump 5320-0011 which replaces Westerbeke 11830 This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and has vertically oriented ports 5.8 gpm (22 lpm) at 10 ft. (3m) total head at 1750 rpm Self-priming to 10 ft. (3m) vertical lift   Fitting: 3/8 in. NTP Size: 5 15/16 long x 3 1/2 wide x 3 5/18 in. high Weight: 1 1/2 lbs. (0.7 kg) Pump with neoprene impeller, full cam, and lip seal Replaces Westerbeke 11830   FEATURES Pump Body: Bronze pedestal Port Size: 3/8" NPT vertical Flow: 7.3 GPM at 10 feet of head, 2100 RPM Pressure: Max 17.3 PSI at 40 feet of head, 2100 RPM Impeller: Neoprene Shaft Seal: Lip Type Shaft: Steel   MARINE Pumping bilges, washdowns. Circulating water in bait tanks. Utility dockside pump. Circulating engine raw water.   INDUSTRIAL Circulating and transferring liquids. Velocity-mixing. Pumping coolants on machine tools. Returning spilled liquids to process. Pumping waste water to sewer. Cellar, yards and sump drainage. Chemical manufacturers and pharmaceutical houses- to pump soap, liquors, ink, dyes, medicines, alcohol, various acids, tanning liquors, glycerine, lotions, brine, etc.

Jabsco 18330-0000 Electric Clutch Pump 12V with 2" Ports This Manually Activated Clutch Pump Offers all the Benefits of Flexible Impeller Pumps with a High Capacity Flow Rate and Horizontally Oriented Ports.   Pump Body: Bronze Port Size: 2" NPT Flow: 83 GPM at 10 feet of Head, 1750 RPM Impeller: Nitrile Shaft Seal: Mechanical, Carbon-Ceramic Shaft: Brass Pulley: 7" Diameter     Used for  MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.   INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine, brine.   FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.     18330-0000 is Jabsco Electric Clutch Pump 12V, 2" NPT Ports, Double "A" Groove Pulley  

Jabsco 31820-0494 Series Industrial Diaphragm Pump Pump Body: Glass Filled Polypropylene, Four Piston, Diaphragm Pump Port Size: Snap-in 1/2" (13 mm) Hose Barb and 1/2" (13 mm) Straight Pipe Thread Flow: 3 GPM/12 LPM Pressure: Continuous, Maximum 40 psi (2.8 bar) at Ambient of 130° F (54.4° C). No Switch. Elastomers: Santoprene Diaphragm, Valves of Viton Motor: Commercial Duty, Permanent Magnet with Thermal Overload Protection. Corrosion Protected. Conforms to Electromagnetic Compatibility 89/336/EEC and Machinery Directive 89/392/EEC, EN50081-1     APPLICATIONS Self-Priming to 10 ft. (3 m). Runs Dry Without Damage. Smooth Flow. Snap-in Ports.   CONSTRUCTION: Water supply pump to the spray bars of road rollers and other compaction equipment, street sweepers, and truck mounted dust control systems.   AGRICULTURAL: Supply pump for herbicide and pesticide spraying equipment.   INDUSTRIAL: Fluid transfer applications for mild acids and bases. Chemical feed pump. Washing fluid supply pump in parts washing systems. Machine coolant pump. Concrete saw lubricant supply pump. Recirculating pump in filtering systems.   Jabsco Industrial Diaphragm Pump 24V 3GPM No Switch  

Jabsco 11870-0007 Electric Clutch Pump 32V Pump Body: Bronze Port Size: 1-1/4" NPT Internal Electric: 32V Pulley: Single B groove or Double A groove Impeller: Nitrile Shaft Seal: Mechanical Carbon-Ceramic, Face Type Shaft: Stainless Steel Bearings: Shielded Ball Bearings   APPLICATIONS This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.   MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.   INDUSTRIAL: Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,   Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.   Jabsco Electric Clutch Pump 32V, 1-1/4" NPT Ports, Double "A" Groove Pulley  

Jabsco 12210-0003 Pump 115V Motor Pump Body: Bronze Port Size: 3/8" NPT Internal Pipe Thread and Adaptors for 3/4" garden hose thread Flow: 3.4 GPM at 10ft Pressure: 17.4 PSI Max Impeller: Neoprene or Nitrile Shaft Seal: Lip Type Motor: 115 Volt AC Intermittent duty with Replaceable Brushes, Stainless Steel Shaft, 6' cord, three prong grounding plug   APPLICATIONS The 12210-Series Pumps are the most compact self-priming flexible impeller 115 Volt AC Utility Pumps Jabsco offers.   INDUSTRIAL: Transferring liquids. Velocity-mixing. Pumping coolants. Pumping waste water to sewer. Cellar, yard and sump drainage. Cooling Heliarc welding equipment.   MARINE: Washing down decks and docks. Water for ship's service supply. Pumping out crank-case oil.   FARMING: Pumping water for stock, poultry houses, farmhouse. Pumping water from wells and cisterns. Pumping liquid ballast into tractor tires. Pumping water from flooded basements.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, etc. Draining water heaters and water closets. Draining laundry tubs below sewer level. Removing water trapped between walls, draining inaccessible places when pipes break or leak. Draining fishing ponds and garden pools. Removing sludge, lye water and other caustics from stopped up drains and sinks.   Jabsco Flexible Impeller Utility Pump 115V 3.4GPM Nitrile Impeller