10" Cabin Light with Switch - White & Blue - 10-30V This surface-mounted cabin light features a touch-switch operation. Offering two colors, warm white and blue, this light provides ample output for reading and activities or just the right amount of blue light for ambiance. Touch the touch switch once to turn on the white light; touch the switch again to switch to the blue light. Composite end caps hide mounting screws for a finished look. Features: Works with 12V and 24V systems. Touch switch Surface mount 10-30VDC - 7.6 Watt IP67 Specifications: LEDs: 33 White, 30 Blue Lumens: 760 (White), 123 (Blue) *The "P" within the part number indicates retail packaging

Surface Strip Light w/Switch - White/Blue LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

Surface Strip Light w/Switch - White LED - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

Surface Strip Light w/Switch - White/Red LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

5" Dome Light with Switch & 3 Stage Dimming - 10-30V - IP67 The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark. Features: 12/24V 51 x 0.5-watt LEDs Natural White (4250K) 720 effective lumens Plastic housing with a high-impact plastic lens Surface mount, 3 stainless steel screws Included IP67 *The "P" within the part number indicates retail packaging

Capri2 - Flush Mount LED Flood Light - 2-Color White/Blue Dimming What do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Capri2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 1000 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Apeiron A3120 Screw Mount Light - Red, Warm White & Blue - Brushed Nickel The Apeiron A3120 is one light fixture with 3 colors on only 2 wires! You can use your existing switch and wiring to cycle through Red, White and Blue LED colors. Perfect for Hardtop, Cockpit and Arch Lighting. Specifications: 1.5 watts 9-30V DC input 3 Colors in 1 Fixture with only 2 wires 3" Diameter Stainless Steel Construction 316 SS Removable Trim Exterior Rated Screw Mountable IP67, Exterior Rated Up to 50,000 Hours of Operation 2007 IBEX/NMMA Innovation Award Winner Features: Advanced optical system - 120 degree full angle with even light, no LED "dots" or pixilation Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display 316 Stainless Steel Trim with PVD - Removable trim ring with Physical Vapor Deposition (PVD) coating to provide a very durable surface finish which will not tarnish or discolor Exclusive Technology: SmartDriver Technology - Integrated directly inside every fixture to connect the Apeiron to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple Tri-Light Technology - i2Systems Tri-Light Technology offers 3 colors of light within a single feature with only 2 wires Simply toggle the input voltage off and back on again to change from one color to the next

Surface Strip Light w/Switch - Warm White/Blue LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

Apeiron PRO A503 - 3W Spring Mount Light - Round - Cool White & Blue - Brushed Nickel Finish The Apeiron PRO 3W is the world’s most technologically advanced Marine LED downlight. Truly a first of its kind. A finely tuned blend of classic style and the latest digital technology  Built with True-to-Life Color.  With 90+ color rendering (CRI) , engineered optics, and i2Sync™ Technology, expect beautiful, consistent white light.  1% Dimming Smoothly dim to a low-level, 1% intensity using our LightLink™ Dimmers or most any 3rd party lighting system.  3-Color Option w/ Dimming With the click of your dimmer switch, simply select, then dim White, Red, and a Third color choice. Powered by award-winning i2Wave™ Technology. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Spring Mount  Use your existing wiring and switch Multiple color options - 1 fixture Simple 2 wire hookup 3.15" Round 1.37" Deep LED Marine Grade Refit friendly Power: 3W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Apeiron PRO A506 - 6W Spring Mount Light - Round - Cool White & Blue  - Brushed Nickel Finish The Apeiron PRO 6W is the world’s most technologically advanced Marine LED downlight. Truly a first of its kind. A finely tuned blend of classic style and the latest digital technology  Built with True-to-Life Color.  With 90+ color rendering (CRI) , engineered optics, and i2Sync™ Technology, expect beautiful, consistent white light.  1% Dimming Smoothly dim to a low-level, 1% intensity using our LightLink™ Dimmers or most any 3rd party lighting system.  3-Color Option w/ Dimming With the click of your dimmer switch, simply select, then dim White, Red, and a Third color choice. Powered by award-winning i2Wave™ Technology. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Spring Mount  Use your existing wiring and switch Multiple color options - 1 fixture Simple 2 wire hookup 3.15" Round 2.05" Deep LED Marine Grade Refit friendly Power: 6W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Apeiron PRO A503 - 3W Spring Mount Light - Round - Cool White & Blue  - White Finish The Apeiron PRO 3W is the world’s most technologically advanced Marine LED downlight. Truly a first of its kind. A finely tuned blend of classic style and the latest digital technology  Built with True-to-Life Color.  With 90+ color rendering (CRI) , engineered optics, and i2Sync™ Technology, expect beautiful, consistent white light.  1% Dimming Smoothly dim to a low-level, 1% intensity using our LightLink™ Dimmers or most any 3rd party lighting system.  3-Color Option w/ Dimming With the click of your dimmer switch, simply select, then dim White, Red, and a Third color choice. Powered by award-winning i2Wave™ Technology. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Spring Mount  Use your existing wiring and switch Multiple color options - 1 fixture Simple 2 wire hookup 3.15" Round 1.37" Deep LED Marine Grade Refit friendly Power: 3W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Apeiron PRO A506 - 6W Spring Mount Light - Round - Cool White & Blue  - White Finish The Apeiron PRO 6W is the world’s most technologically advanced Marine LED downlight. Truly a first of its kind. A finely tuned blend of classic style and the latest digital technology  Built with True-to-Life Color.  With 90+ color rendering (CRI) , engineered optics, and i2Sync™ Technology, expect beautiful, consistent white light.  1% Dimming Smoothly dim to a low-level, 1% intensity using our LightLink™ Dimmers or most any 3rd party lighting system.  3-Color Option w/ Dimming With the click of your dimmer switch, simply select, then dim White, Red, and a Third color choice. Powered by award-winning i2Wave™ Technology. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Spring Mount  Use your existing wiring and switch Multiple color options - 1 fixture Simple 2 wire hookup 3.15" Round 2.05" Deep LED Marine Grade Refit friendly Power: 6W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - Chrome Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - White Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - Brushed Nickel Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.