Deck Eye Hole Center - 28mm This deck eye is made from 316 stainless steel, and it went through multiple machining and finishing operations to ensure that it is free of damaging sharp corners and burrs. Specifications: Weight: 0.001kg Height: 9mm Width Between Center of Holes: 28mm Hole Diameter: 3.5mm

Deck Eye Hole Center - 24mm This deck eye is made from 316 stainless steel. It underwent multiple machining and finishing operations to ensure that they were free of damaging sharp corners and burrs.  Specifications: Height: 5mm Width Between Centers of Holes: 24mm Hole Diameter: 4.5mm Weight: 0.001kg

Deck Eye Hole Center - 42mm This deck eye is made from 316 stainless steel, and it went through multiple machining and finishing operations to ensure that it is free of damaging sharp corners and burrs.  Specifications: Weight: 0.001kg Height: 14mm Width Between Center of Holes: 42mm Hole Diameter: 5mm

Deck Eye Hole Center - 31mm This deck eye is made from 316 stainless steel, and it went through multiple machining and finishing operations to ensure that it is free of damaging sharp corners and burrs.  Specifications: Weight: 0.001kg Height: 10mm Width Between Center of Holes: 31mm Hole Diameter: 4.5mm

Small Mast or Deck Eye This eye plate is manufactured from 316 Stainless Steel and underwent multiple machining and finishing operations to ensure it has a smooth finish and is free of damaging sharp corners and burs.  Features: Electropolished to give it as much resistance to the marine environment as possible Specifications: Plate Size: 28mm x 28mm Plate Thickness: 1.5mm Eye Material Diameter: 5.5mm Fixing Hole: 5mm

Series 25 T-Track - Racing Track - Black - 25mm(63/64") Stop Hole Centers Features: 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle Low Profile Lightweight Track Fastenings: 5mm (3/16") countersunk fasteners at 100mm (3-15/16") centers Materials: Anodised aluminium alloy track DSpecifications: Length: 996mm(3.3") Weight: 405g(14.2oz)

Pad Eye Plate 46mm x 46mm This eye plate is manufactured from 316 stainless steel and underwent multiple machining and finishing operations to ensure it had a smooth finish and was free of damaging sharp corners and burs. Features: Electro-polished to give it as much resistance to the marine environment as possible. Specifications: Plate Size: 46 x 46mm Plate Thickness:1.5mm Eye Diameter: 6.3mm Weight: 0.1kg

Removable Eye Deck Plate/Assembly Specifications:  Eye Width 5/8" (16 mm) Eye Height 5/8" (16 mm) Eye Stock 1/4" (6 mm) Length 3" (76 mm) Width 3" (76 mm) Fasteners (4), 1/4" FH (6 mm) C/C A 2" (51 mm) C/C B 2" (51 mm) SWL 2250 lbs. (1020 kg) Weight 9.5 oz. (269 g) Deck plate hole is 3/4"-10

Flat Eye Plate 41mm x 51mm This eye plate is manufactured from 316 stainless steel and underwent multiple machining and finishing operations to ensure it has a smooth finish and is free of damaging sharp corners and burs.  Features: Electro-polished to give it as much resistance to the marine environment as possible.

Center Swivel Bracket - 2-1/2" Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets. Features: Bolt-on installation Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2-1/2" bunk flange hole centers 11 gauge galvanized steel Made in the USA Sold individually

Center Swivel Bracket - 2" Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets. Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2" bunk flange hole centers 11 gauge material Sold individually

28mm Lead Ring Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6 aluminum for a smooth, slippery surface, and with no moving parts, wear is minimal. Features: Center Hole: 28mm (1-1/8") Outer groove width: 20mm (7/8")

Pry-Out Deck Plates Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the plate. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 8-1/2" Hole Cut: 6-1/2" Passage: 6-3/16" Center: Smooth

25mm Single Block with Clevis Pin The 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light.  Features: This range could be used to create purchasing systems for lifting, garage door mechanisms, storage solutions, etc. The Clevis Pin attachment makes the block easy to fit and remove from lacing eyes, eye bolts, U bolts, etc. Specifications: Max Rope: 8mm Breaking Load: 500kg

Padeye - 4 Pack PAD-I has been designed to allow you to fix low-loading parts to your boat or deck without having to drill attachment holes. PAD-I has been manufactured using carbon-filled nylon, so it is extremely strong. It comes complete with a length of 1.5mm SK99 Dyneema, which means that the whole unit only weighs 5.5 Grams. Features: PAD-I is able to withstand 80 kg of force before lifting from the deck when stuck with Sikaflex, and up to 250kg when stuck with epoxy/plexus It's extremely easy to put simple take-up systems into the boat without the hassle of drilling holes Applications: The PAD-I can be stuck to the hull/deck using Sikaflex, epoxy, plexus, etc. (not included) Specifications: Diameter: 32mm Height: 8mm Weight: 5.5g Package Size: 4 Padeyes included