|
Small 400W XHEAT Boat Bilge & RV Heater
This Xtreme boat bilge and RV heater is suitable for boats up to 24' in length and small RV compartments.
Features:
True forced air heating circulates air more effectively and heats it more evenly for more accurate climate control
The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available
Failsafe Design cannot overheat (heating technology is dynamic and self-regulating)
High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier
A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation
Designed for durability and reliability
Complete protection (fully anodized inside and out)
Small footprint
Certified and independently tested now with the UL 1278 standard
Specifications:
Wattage: 400W
BTU: 1365
Inrush (startup) Current: 8.2 A, 1 sec.
Typical Operating Current: 4. A
Fan Flow: 40CFM
Heater Dimensions (inch): 5.75″ x 3.5″ x 5-1/8″
Fuse Size Required: 15A
Power Cord: 15 ft. marine-rated power cord
|
328.57 |
|
|
Large 800W XXXHEAT Boat Bilge & RV Heater
This Xtreme boat bilge and RV heater is suitable for boats up to 35' in length and medium RV compartments.
Features:
True forced air heating circulates air more effectively and heats it more evenly for more accurate climate control
The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available
Failsafe Design cannot overheat (heating technology is dynamic and self-regulating)
High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier
A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation
Designed for durability and reliability
Complete protection (fully anodized inside and out)
Small footprint
Certified and independently tested now with the UL 1278 standard
Specifications:
Wattage: 800W
BTU: 2729.7
Inrush (startup) Current: 14A, 1 sec.
Typical Operating Current: 6.5A
Fan Flow: 40 CFM
Heater Dimensions (inch): 8″ x 3.5″ x 5-1/8″
Fuse Size Required: 20A
Power Cord: 15 ft. marine-rated power cord
|
421.43 |
|
|
Medium 600W XXHEAT Boat Bilge & RV Heater
This Xtreme boat bilge and RV heater suit boats up to 28' in length and medium RV compartments.
Features:
Accurate forced air heating circulates air more effectively and heats it more evenly for more accurate climate control
The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available
Failsafe Design cannot overheat (heating technology is dynamic and automated)
High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier
A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation
Designed for durability and reliability
Complete protection (fully anodized inside and out)
Small footprint
Certified and independently tested now with the UL 1278 standard
Specifications:
Wattage: 600W
BTU: 2047.3
Inrush (startup) Current: 12A 1 sec.
Typical Operating Current: 5.5 A
Fan Flow: 40 CFM
Heater Dimensions (inch): 8″ x 3.5″ x 5-1/8″
Fuse Size Required: 15A
Power Cord: 15 ft. marine-rated power cord
|
375.06 |
|
|
Boat, Cabin, & RV Heater
This Xtreme boat and cabin heater is designed to help keep your boat cabin, RV, or other small space comfortable during the fall and winter months.
This heater features quiet operation, a low profile, and a stable base that prevents tipping. Drawing air from the top, this heater can be placed up against walls or on carpeted surfaces without blocking the air intake. The 1500-watt heat setting will quickly warm your living space, while the 750-watt setting will efficiently maintain comfortable temperatures. The 6 ft. power cord offers more flexibility for heater placement independent of outlet locations.
Features:
Built-in overheat protection
"One Shot" secondary overheat protection
Two heat settings: 750/1500 and 1500 watts
Freeze prevention thermostat setting
Fan-only setting
Automatic thermostat
6 ft. power cord
UL Listed to UL 1278 standards
Specifications:
Color: White/black
Wattage: Low: 750 / High: 1500
Amps: Low: 6.25 / High: 12.5
Voltage: 120V
Dimensions (inch): 10″ L x 10-1/4" W x 4-3/4" H
Cord Length: 6 ft.
Weight: 5lbs
|
126.06 |
|
|
Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.
L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.
The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market. “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting. According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.
For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place.
Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price.
For more information, please visit www.thewirie.com.
About The Wirie:
Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie. The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution. Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com
About L-com:
Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com
Contact:
Liesbet Collaert
liesbet@thewirie.com
http://www.thewirie.com
The Wirie can now be found at CLR Marine.
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband
http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie
|
|
|
Small Swingback Back Boat Seat Cover - Vinyl White
Keep your seats and consoles from cracking and fading! Boat seat and console
covers are designed to protect your seats from damaging ultra-violet rays,
wind, mildew and water. All Covers fold easily for storage and keep your
seats cool and clean!
Dimensions: 36"H x 36"W x 20"D
Features:
Mildew and water repellant
UV Protection
Waterproof
Air vents
Heavy duty
Drawstring hem
|
34.04 |
|
|
Quick Release Bracket for 450W & 600W Heaters
Install and Remove your Xtreme Heater FAST!
Driven by customer demand, our quick-release bracket was designed specifically for your Xtreme heater and allows you to easily install and remove your heater(s) in seconds, without the need for tools.
Using this bracket, your mounting options include locations you may not have considered due to concern for blocked access to other components in your tight engine space.
For our customers who prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick-release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, lock it down, and plug it in!
Features:
Built Xtreme Tough, anodized aluminum construction will not corrode
Provides easy off-season storage, for quick access to engine spaces
Works on ALL Xtreme Heaters built after 2004
Quickly Install and Remove your Heater Without Tools!
One Year Warranty
|
47.68 |
|
|
Towing & Trailering
Trailering can add new dimensions to the sense of freedom that comes with boating, and that's one of the reasons it's so popular. With a trailerable boat, you're free to boat on just about any lake, river, bay or inlet. Trailering is great way to explore different waterways in your state or region it's also the most affordable way to store your boat. The tips below can help you learn all about towing and boat trailer maintenance.
Look for Certified Trailers NMMA Trailer Logo. Highly trained third-party inspectors visit the manufacturer each year and physically inspect boat trailer models, ensuring compliance to all certification requirements.
Trailering your boat can add new dimensions to the freedom that comes with boating. If you've never trailered a boat, there are several things you need to consider. First, determine the towing capacity of your car, truck or SUV. You can find this information in the owner's manual of your vehicle. Usually compact family sedans are not suitable for towing more than a small, aluminum fishing boat or PWC with a properly mounted hitch and lighting plug . Most standard pick-up trucks and SUVs can trailer boats up to 25 feet, but always consult your vehicle owner's manual for limitations.
The owner's manual of your boat will list the "dry” weight of the boat, less fuel and gear. When you're assessing your vehicle's towing capacity, be sure to add several hundred pounds to the dry weight to account for gear, gas and accessories.
As the weight, length and beam (width) of a given boat increase, so does the muscle power needed to launch and retrieve it. A small boat may be easy for one person to handle at the ramp, but larger boats (generally those more than 25 feet) may require additional hands. Don't be afraid to ask for help at the ramp if you need it, trailer boaters are always happy to help.
STOP Invasive Species
By following these guidelines:
Never release live or dead bait or bait packaging into a water body, or release aquatic animals from one water body into another.
Share live bait with other anglers or empty your bait bucket in the trash before leaving the area.
Don't drive the boat through aquatic plants; avoid chopping vegetation with outboard motor propeller
Once on dry land, drain water out of every conceivable place that can hold water: Follow factory guidelines for eliminating water from engines. All engines hold water, but jet drives on personal watercraft and other boats can hold extra water.
Remove the stern drain plug and put boat on an incline so that all the water drains out.
Drain livewells, bilge and transom wells.
Empty water out of kayaks, canoes, rafts, etc.
Remove any visible plant, fish, and animal or fragment as well as mud, which can house them. Check trailer, in and around the boat itself, the anchor, props or steering nozzle (PWCs and jet boats), lines, fenders, paddles
Rinse your boat, trailer, and equipment. Clean and dry anything that came in contact with the water. It is best to use high-pressure, hot (104°F) water or a solution of one percent table salt and water. A garden hose will work if no other option is available.
Air-dry your boat and equipment for as long as possible—at least five days is optimal.
Specials Closeouts Remanufactured Rebates
|
|
|
We have been told of a problem on our web site. The coupon code TT to $ave 10% on Tufted Topper has not been working and shipping to the lower 48 states was being added. To make up for this problem we will be extending our Boat Show Sale until March 31 on the Tufted Topper. We apologize to all that have run into this problem, and we are refunding all shipping charges plus the 10% discount that have occurred.
'Tufted Topper' is not your typical mattress cover but a 4 layer, quilted, ultra-plush, 'pillow-top' pad that's custom-fitted to your boat or RV's sleeping cushions turning them into a virtual sea of mattress-style comfort. Hard cushions and uncomfortable open crevices between the cushions are a thing-of-the-past with 'Tufted Topper'. Now you can enjoy the benefits of a cushy, one-piece quilted sleeping surface that hides EVERYTHING, at a fraction of the cost of an expensive marine mattress. At only 2" high, it delivers the ultimate in sleeping comfort, easily folds to access under berth storage areas and doesn't take up a lot of head room space.
|
|
|
True North Deluxe 9206 120VAC High-Performance Space Heater - 600W, 900W & 1500W
600, 900, and 1500 watt electric space heater. Rugged, steel body construction. Dual overheat protection.
This rugged AC electric heater keeps the cabin warm on the chilliest of those early and late season nights in the marina. The model 9206 True North AC heater was recognized by Powerboat Reports as being the best. There is no other heater on the market that delivers the performance and quality of the True North.
Features:
Steel construction
3 heat settings (600, 900, and 1500 Watt)
Option of a 'fan only' setting
Built-in thermostat
Anti-freeze setting
Low profile design
Made in Canada
5-year warranty
Benefits:
Years of trouble-free use
Extended boating season
Greater on-board comfort
Can use for 'no heat' air circulation
Eliminate snow or frost build up on boat top
Cannot tip over
Easy to stow when not in use
|
97.44 |
|
|
Premium Water Heater 5.8G - 120V
Marine Premium Water Heater 22L (5,8 gal) 800W 120V, toxic free ceramic inside coating to ensure highest water quality over time
Features:
Heats up 22L (5,8 gal) in 1h, good for 35L of mixed warm water or a 3,5 minute shower
Replaces common brands as Isotemp
Toxic Free Ceramic Double coating
Specifications:
Weight: 10,5 kg/24 Lb
Dimensions: 423/16.65L x 390/15.35H x 390/15.35W mm/in
*CE marked (LVD) directive 2006/95/EC, EN 60335-1 (2008), EN 60335-2-21 (02-2004), A1 (07-2005), EC (01-2008). (EMC) directive: 2004/108/EC, EN 55014-1 (1999), A1 (2000), A2 (2003), EN 55014-2 (1998), A1 (2002)
|
481.84 |
|
|
Orca Auto 1300 12V Automatic Bilge Pump
Orca Family - compact and powerful electric bilge pumps designed to be installed deep in the bilge.
Features and Benefits
Compact powerful submersible electric bilge pumps - with large filter base to ensure maximum surface area exposed to bilge water.
High performance
Compact design- fits in small spaces in the bilge
Low amp draw means long battery life
Efficient design - Large filter base ensures maximum surface area exposed to bilge water
Simple installation- Multiple wire locations, extra long wires
Easily maintained- Access to motor cartridge and filter area
Reliability - Robust ABS fuel-resistant housing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
106.22 |
|
|
Orca Auto 1300 24V Automatic Bilge Pump
Orca Family - compact and powerful electric bilge pumps designed to be installed deep in the bilge.
Features and Benefits
Compact powerful submersible electric bilge pumps - with large filter base to ensure maximum surface area exposed to bilge water.
High performance
Compact design- fits in small spaces in the bilge
Low amp draw means long battery life
Efficient design - Large filter base ensures maximum surface area exposed to bilge water
Simple installation- Multiple wire locations, extra long wires
Easily maintained- Access to motor cartridge and filter area
Reliability - Robust ABS fuel-resistant housing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
119.66 |
|
|
Orca 2000 GPH Submersible Bilge Pump 12V
Orca Family - compact and powerful electric bilge pumps designed to be
installed deep in the bilge.
Features & Benefits:
Compact powerful submersible electric bilge pumps - with large filter base to ensure maximum surface area exposed to bilge water
High performance, Compact design- fits in small spaces in the bilge
Low Amp draw means long battery life
Efficient design - Large filter base ensures maximum surface area exposed to bilge water
Simple installation- Multiple wire locations, extra long wires
Easily maintained- Access to motor cartridge and filter area
Reliability - Robust ABS fuel-resistant housing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
97.68 |
|
|
Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - White
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: White
|
9.88 |
|