Amt 5351-95, Cast Iron Coolant Pump 230/460volt  INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS   1/4 HP Totally Enclosed Motor (TEFC) Three Phase Motor 230/460 volts  0.8/0.4 amps Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry Delivers up to 56 GPM and 26 PSI 3/4" FNPTOutlet   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants. AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.  

AMT 5391-95, Immersion Coolant Oil Pump 23gpm 230/460volt INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   Cast Iron Construction 1/4 HP 230/460V 3 Phase Immersion Type Shaft Seal Material: Sealless Design Speed (RPM): 3450 Type: IMM Voltage: 230/460 Fluid Port: 0.5" HP:1/4 Impeller Material: Stainless Steel GPM: 23   Replacement for Standard Machine Tool Industry Pumps  Fuji: VKP-063A Old Fuji: VKN-061A Mitsubishi: NQ100J  Toshiba: OPF-100M Hitachi: CPD-100M Yasukawa: VFPC-100 Graymills: IMV-25   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants. AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.  

AMT Pump 5411-95 Coolant Pump Cast Iron Imm Cast Iron Immersion Type Coolant Pump Oil Coolant Pumps Fluid Port: 1 HP: 1 Impeller Material: Stainless Steel Phase: 3 1" Cast Iron 1 HP 230/460V 3 Phase Immersion Type Shaft Seal Material: Sealless Design Speed (RPM): 3450 Type: IMM Voltage: 230/460

AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   1/8 HP Totally Enclosed Motor (TEFC) Three Phase Motor 230/460 volts, 0.3/0.19 amps Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry Delivers up to 10 GPM 3/8 inch outlet diameter   Able to pump liquid down to 2 inches Replacement for to following Standard Machine Tool Industry Pumps  Fuji: VKP-053A Old Fuji: VKN-051A Mitsubishi: NQ-60J Toshiba: OPF-60M Hitachi: CPD-060M Yasukawa: VFPC-061DIF Graymills: IMV-08   Gusher: VBV-18

AMT 5390-95, Immersion Coolant Oil Pump 23gpm 115volt INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS   1/4 HP Totally Enclosed Motors (TEFC) 115/230 volts, 3.0/1.5amps Single or Three Phase Motors Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry 1/2 inch FNPT Ports Delivers up to 23 GPM and 26 PSI   Replacement For The Following Standard Machine Tool Industry Pumps  Fuji: VKP-063A Old Fuji: VKN-061A Mitsubishi: NQ100J  Toshiba: OPF-100M Hitachi: CPD-100M Yasukawa: VFPC-100 Graymills: IMV-25 Gusher: VBV-14   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.

AMT Pump 282L-95 3Ph 2Hp Open Drip-Proof 56J 230/460 AMT Pump 282L-95, 1-1/2" Cast Iron Self-Priming Centrifugal Pump Self-Priming Centrifugal Electric Driven Pump HP: 2HP Motor Frame Size: 56J Voltage: 230/460V Phase: 3 Shaft Seal Material: Buna-N / Stainless Steel

AMT Pump 316A-95 Sewage/Trash Pmp 2" 3Ph 3Hp Self-Priming Electric Motor Driven Sewage / Trash  Pump 2" Cast Iron 3 HP 230/460V 3 Phase TEFC Motor Frame Size 56J Totally Enclosed and Fan Cooled Shaft Seal Material: Viton Silicon/Carbide

Amt 5764-95 Sub Shredder Pump 3" Npt SUBMERSIBLE SHREDDER SEWAGE PUMP   Cast Iron with Stainless Steel Motor Housing Carbide-Tipped Shredder Impellers Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability Silicon Carbide Lower Seal 3" NPT Port Sizes Max. Temperature 104° F  3 HP 230 Volt     AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Also ideal for grinder type solids reduction application. Motors are rated continuous duty and single phase models have thermal overload protection.   AMT Submersible Shredder Sewage Pumps are reliable, cost effective and low maintenance.    

AMT Pump 2825-95 Pump Cast Iron Self Prime 3/4Hp 1Ph Pump Body: Cast Iron  Shaft Seal: Buna-N Shaft Seal  Port Size: 1-1/2 inch x 1-1/2 inch NPT Ports.  Motor Specs : 3/4 Horsepower, 115/230 Volts, Single Phase, ODP (Open Drip Proof) NEMA 56J Frame Electric.   Product Specs : Cast Iron Construction with Buna-N Seals Handles 3/8 Inch Diameter Semi-solids NEMA 56J Motors with Stainless Steel Shaft Maximum Working Pressure 75 PSI Self-primes to 20 Ft. Self-cleaning, Clog Resistant Impeller Steel Base and Handle Included Dual Volute Design

AMT 4230-97, Coolant Recirculating Pump 1 Phase, 115V, 3/8" NPT Female 3/8" BRONZE COOLANT RECIRCULATING PUMPS   Cast Bronze Construction No Bottom Bearing!!! Brass Column and Impeller Shaft Bronze Self-cleaning Open Impeller 3/8" NPT Discharge Port Maximum Flow 8 GPM Maximum Head 10 ft. Available with 115V AC Single Phase or 230V AC Three Phase Motors,1590 RPM 1/25 HP Totally Enclosed Fan Cooled (TEFC) Motor Delivers up to 8 GPM and 4 PSI   The AMT Bronze Coolant/Recirculating pump has been manufactured for a wide variety of Industrial/Commercial Coolant and Recirculating applications. The absence of a bottom bearing makes the unit ideal for handling erosive liquids. A 36" 3-conductor power cord is included. AMT Bronze Coolant/Recirculating pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast, 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

AMT Pump 368B-95 Strt Cent Pmp Iron 1/2Hp Engine/Motor Type: Total Enclosed Fan Cooled Horsepower: 0.5 HP Phase: Single-Phase Pump Voltage: 115 Volt (Single-Phase), 230 Volt (Single-Phase) Frequency: 60 Hz Rated Current: 9/5 Amps Pump RPM: 3450 Thermal Overload Protect: Yes Motor Frame: 56J Pump Type: Straight Centrifugal Pump Pump Style: Electric Centrifugal Pump Inlet Diameter: 3/4" Outlet Diameter: 1/2" Discharge Port Rotation: 90 Degree Increments Max Gallon Per Min (GPM) : 38.0 Max Total Head (Static): 57 Feet Maximum Pressure (PSI): 25 Max Working Pressure: 75 PSI Solids Handling: Yes Max Solids Handling (Inches): 0.125" Self Priming Pump: No Pump Housing Drain: Yes Housing Material: Cast Iron Impeller Type: Self-Cleaning, Semi-Open Impeller Material: Stainless Steel Seal Material (Mechanical Or Other): Buna-N Temperature RangeTo 180 F Port Type: NPT Altitude Affected: Yes

Amt 2850-99 Cast Iron 1 1/4" Self Priming Pedestal Pump AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000. • Cast Iron & Stainless Steel Construction • Buna-N Mechanical Seals on Cast Iron Models • Viton® Mechanical Seals on Stainless Steel Models • Optional Silicon Carbide Mechanical Seals Available • 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes • Dual Volute Design Reduces Radial Load on Motors • Maximum Temperature ◆ Buna-N 180° F ◆ Viton® 200° F • Self-Cleaning, Semi-Open Impeller • Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings

AMT 285P-95, Self-Priming Centrifugal Pump 3/4 HP, 3 PH, 230/460 V Cast Iron Construction Buna-N Mechanical Seal and O-Ring with optional Viton? or Silicon Carbide Mechanical Seal and O-ring 1" & 1-1/4" NPT Suction and Discharge Ports Dual Volute Design Reduces Radial Load on Motor Maximum Working Pressure 75 PSI Maximum Temperature 180 F Self-cleaning, Semi-open Impeller

AMT Pump 3152-95 Centrifugal Pump Cast Iron Heavy Duty Straight Centrifugal Pump HP: 5 Voltage: 230/460 Phase: 3 Type: Totally Enclosed, Fan Cooled Motor Frame Size: 184JM Shaft Seal Material: Buna-N / Stainless Steel AMT Crossover Model for Flint & Walling C55A503T  

Amt Pump 3/4Hp 3Ph Sc Seals Self Priming Centrifugal Pump Model Number: 285P-95 Voltage: 230/460 Horsepower: 3/4 Gallons Per Hour: 4020 (67 GPM) 3/4HP 230/460v/3 TEFC