|
Micropump GA-T23.J9FS.A Pump Head A Mount
The GA Series high-performance pumps provide precise and pulseless flows. Featuring Micropump's suction-shoe design, GA Series pumps self-compensate for wear, ensuring near zero slip and a longer pump life. Pumps are available in a wide range of materials and configurations.
Feature:
Small Size
Smooth, Pulseless Delivery
Chemically Resistant
Easy to Service
Proven Reliability
Advanced Pump Technology
Wide Range of Options
OEM Configurations
Enhanced Efficiency
Pump Series: GA Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 177
Max Diff. Pressure (psi): 75
Displacement (ml/rev): 0.092
Design: Standard Design
Gear Set: 0.125/2/40 (0.092 ml/rev)
Gear Material: PEEK (hex drive)
Static Seals: PTFE
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: None
Shafts: 316SS
Gear TrimNone
Model: GA-T23.J9FS.A
|
1147.03 |
|
|
Hypro 4101C-A, Roller Pump 7Gpm Ci
Features:
Max flow: 7 gpm
Max pressure: 150 psi
Max speed: 2600 rpm
Port sizes: 3/4" NPT
Pump shaft rotation: CW
5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)
Pumps are available in reverse rotation
|
231.75 |
|
|
Hypro 4101Xl-A, Roller Pump 7Gpm 150Psi
Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.
The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.
Features:
Max flow: 7 gpm
Max pressure: 150 psi
Max speed: 2600 rpm
Port sizes: 3/4" NPT
Pump shaft rotation: CW
5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)
|
592.44 |
|
|
Little Giant Submersible Pump
Little Giant 1-A Submersible Pump
Small submersible oil-filled pump with epoxy coated cast aluminum housing. For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This compact 170 GPH pump features a 1/4" MNPT discharge, 7' shut-off head capability, and screened inlet. This pump is not recommended for aquariums, swimming pools and fuel oil transfer.
Features:
170 GPH @ 1 ft.
Horespwoer 1/200, 115 Volt, 1.1 Amps
Operates submersed.
6' cord
Epoxy-coated aluminum housing
Bottom inlet has snap-off screen for easy cleaning.
1/4" MNPT outlet, with 90° elbow accessory, accepts 1/2" I.D. tubing
|
155.22 |
|
|
Groco Sp-99-A Vane Pump Rotor, 8 Slots
|
47.39 |
|
|
Micropump GJ-N21.PF1S.A-B1 Pump Head A Mount
Micropump 81978 GJ-N21.PF1S.A-B1
Mag-Drive Gear Pump Head
Requires A-Mount compatible Drive
81978 constructed of Base Material 316SS
Gear Material PPS (carbon fiber/ptfe)
Shaft Material 316SS
|
1048.75 |
|
|
Micropump GJ-N23.PF1S.A-B1 Pump Head A Mount
Micropump 81528 GJ-N23.PF1S.A-B1 Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81528 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS
INLET/OUTLET CONNECTION TYPE: FNPT
INLET SIZE: 1/8 in
OUTLET SIZE: 1/8 in
MAX PRESSURE: 300 psi (21 bar)
MATERIAL - GASKET: PTFE
MATERIAL - GEAR: PPS (carbon fiber/ptfe)
DISPLACEMENT: Positive Displacement
|
1048.75 |
|
|
Tuthill 00LE-A-C-7 Pump 1Gpm Short Shaft
Pump Body: Cast Iron
Shaft Seal: Mechanical Seal Viton
Port Size:Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
597.13 |
|
|
Tuthill 000LE-A-7 Pump 3/8 Port
Type: Internal Gear
Maximum Flow Rate: 0.5 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 3/8 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, PPS
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
Configuration Assembly: Tang Shaft
|
593.75 |
|
|
Tuthill 1LE-A-7 Pump 3.2Gpm Short Shaft
Cast Iron Rotary Gear Pump
Pump End Only
Cast Iron Construction
Tang Shaft
Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
646.25 |
|
|
Tuthill 2LE-A-7 Pump 6.2Gpm 1/2"Ports
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
715.00 |
|
|
Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
NO motor
Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
724.80 |
|
|
Tuthill 1LEV-C-A-88462 Pump 3.2Gpm 1/2Hp 1725Rpm 1P
|
684.25 |
|
|
Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft
Type: Internal Gear
Maximum Flow Rate: 6.2 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 1/2 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
|
790.80 |
|
|
Tuthill 2LEV-CC-A-7 Pump Tang Drive
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field)
Counter-clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
790.80 |
|