|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 30"
Diameter: 1-1/2"
Strokes/Gal: 6
Capacity: 10GPM
Hose Length: 32"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.03 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 24"
Diameter: 1-1/2"
Strokes/Gal: 7
Capacity: 8GPM
Hose Length: 24"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.64 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 36"
Diameter: 1-3/4"
Strokes/Gal: 4
Capacity: 13GPM
Hose Length: 36"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.88 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 36"
Diameter: 1-3/4"
Strokes/Gal: 4
Capacity: 13GPM
Hose Length: 72"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
58.09 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 36"
Diameter: 1-3/4"
Strokes/Gal: 4
Capacity: 13GPM
Hose Length: 108"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
57.59 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 24"
Diameter: 1-3/4"
Strokes/Gal: 6
Capacity: 10GM
Hose Length: 24"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.23 |
|
|
Thirsty-Mate Hand Pump
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 24"
Diameter: 1-3/4"
Strokes/Gal: 6
Capacity: 10GPM
Hose Length: 72"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.04 |
|
|
Thirsty-Mate Hand Pump with 20" Hose
The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.
Features:
Angled top sleeve
Contoured red tee handle
Non-conductive material
Self-priming plunger valve
Special polyvinyl grey body and shaft
Removable foot valve for cleaning
Self-priming
Solvent welded construction
Will withstand temperature to 120 degrees F (49 degrees C)
Length: 18"
Diameter: 1-1/4"
Strokes/Gal: 10
Capacity: 6GM
Hose Length: 20"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.80 |
|
|
Thirsty-Mate High Capacity Super Pump
Coast Guard Approved for commercial use
Manufactured to exceed the original requirements of Coast Guard regulation No. 519C. The specifications of this regulation were later reduced when no hand pump other than Beckson's could pass the test requirements. Still "over built" to Beckson's higher standard.
Length: 24"
Diameter: 3"
GPM: 22
Inlet Hose: 36"
Outlet Hose: 120"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
487.06 |
|
|
Intake Extension Hose
Designed to extend the intake reach of the 124, 136 and 300 series pumps. Use the intake hose to pump out hard to see or reach areas. Comes with bilge strainer to prevent clogging. Makes difficult pumping jobs easier.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.33 |
|
|
Intake Extension Hose
Designed to extend the intake reach of the 124, 136 and 300 series pumps. Use the intake hose to pump out hard to see or reach areas. Comes with bilge strainer to prevent clogging. Makes difficult pumping jobs easier.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
51.72 |
|
|
Siphon-Mate Siphon Pump
Specialty Transfer Pump
Safety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle.
Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.
Features
Use for diesel, oil, water
Length: 11-1/2" (28.4cm)
Diameter: 1-1/4" (32mm)
Lifts: 4 oz (.12 L) per stroke
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.88 |
|
|
F4B-9 Impeller Pump OEM - Flange Mount
Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.
Features:
Flange mount for engines such as: Panda 12000 NE PMS Kubota, Panda 6000 ND PMS Kubota, Panda 8000 NE PMS Kubota, Panda 9000 ND PMS Kubota
A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds
Wearing parts are easily replaceable for all standard models
Applications:
Engine cooling – raw water handling
Freshwater handling
Specifications:
Port size: (inch) 3/4" hose
Mount Type: Flange
CAM: Full 1/1
Lip seal
Material: Bronze
Cooling Capacity:
The required output of the cooling pump – raw water as well as fresh water handling – is related to:
Engine type: (gasoline or diesel)
Type of cooling system (size of heat exchanger)
Water cooled engine oil, reverse gear, exhaust system
*Sold as an Individual
|
240.00 |
|
|
Sherwood G-30-2B Engine Cooling Pump All Bronze
FEATURES
Pump Body:
Bronze
Ports:
1" Hose
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Mechanical
Drive:
Bracket Mount Pulley Drive.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
All Bronze version of Sherwood G-30-2.
Sherwood Engine Cooling Pump All Bronze for G30-2B G-30-2B, Chris Craft and Volvo Penta Model 350 16.80-18346
|
818.46 |
|
|
F5B-9 Impeller Pump OEM - Flange Mount
Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.
Features:
Crankshaft style cooling pump featured on older style small block GM marine engines such as: American Diesel & Bomac Marine
Easy to access impeller design
A general feature of all flexible impeller pumps is that they cannot be permitted to run dry for more than 30 seconds
Wearing parts are easily replaceable for all standard models
Applications:
Engine cooling – raw water handling
Freshwater handling
Specifications:
Port size: (inch) 3/4" NPT
Mount Type: Flange
CAM: Full 1/1
shaft: Mechanical
Material: Bronze
Cooling Capacity:
The required output of the cooling pump – raw water as well as fresh water handling – is related to:
Engine type: (gasoline or diesel)
Type of cooling system (size of heat exchanger)
Water cooled engine oil, reverse gear, exhaust system
*Sold as an Individual
|
438.00 |
|