|
Dual Rod Holder/Front Mount
Front-mount rod holder fits all 1 5/16" diameter Cannon booms, including telescopic boom. Also fits several other downrigger makes. Each holder has a separate angle adjustment. Comes with two rugged rod tubes with gimbal and drain hole, two aluminum tube clamps, and Lexan® dual-mounting bracked.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
56.06 |
|
|
2116 HP Electric Downrigger (36"-60")
The number one choice in trolling performance for the charter captain. Equipped with heavy duty, adjustable dual rod holders and all the other great features of our heavy duty, High Performance Downriggers.
PRODUCT OVERVIEW:
Unbeatable pulling power lifts 15 lb. weights at 295 ft./min. and 20 lb. weights with ease at 260 ft./min.
Includes Illuminated, resettable, sealed and silent digital line counter
300 ft. of 180 lb. Test, HP Stainless Steel Downrigger Cable
Dual adjustable and stainless steel jacketed Rocket Launcher Rod Holder (No. 447)
Includes Scotty/Marinco™ Plug and Receptacle
Includes 1148 Weight Storage Hook and marine grade stainless steel boom
Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position
Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position)
Includes Power Grip Plus Line Release
1/2″ Kevlar drive belt by Optibelt™ – The same belts used by superior European auto manufacturers
Clutch brake with the largest braking surface in the industry
Includes 1026 Swivel Pedestal Mount with 16 available positions
Fully assembled and factory tested with complete saltwater protection
Downrigger Boom Length: 36″ – 60″ telescoping stainless steel boom
Downrigger Boom Diameter: 1 1/4″
Rod Holder Interior Diameter: 1.70″
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
912.02 |
|
|
No. 1116 Propack Depthpower Downrigger (36"-60")
The top choice of charter captains. This unit gives the versatility of a telescoping boom with the Dual Rod Holder option and Swivel Pedestal Mount.
PRODUCT OVERVIEW:
Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min. and 15 lb. weights at 203 ft./min.
Spray protected positive-drive depth counter and Kevlar drive belt by Optibelt™
250 ft. of 150 lb. Test, Stainless Steel Downrigger Cable
Includes 247 Dual Rod Holder – Two 10″ tube style rod holders
Includes Scotty/Marinco™ Plug and Receptacle
The lowest amperage draw of any downrigger made with less than 1/3 the battery draw than some of the competition
Includes 1148 Weight Storage Hook and marine grade stainless steel boom
Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position)
Includes 2 Power Grip Plus Line Releases
Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position
Includes 1026 Swivel Pedestal Mount with 16 available positions
Fully assembled and factory tested with complete saltwater protection
Downrigger Boom Length: 36″-60″ telescoping stainless steel boom
Downrigger Boom Diameter: 1 1/4″
Rod Holder Interior Diameter: 2 1/8″
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
719.72 |
|
|
60° Rod Holder Grill Mount
Kuuma's 60° Rod Holder Grill Mount enables you to turn your fishing rod holder into a grill mount. The mount has a 60° angle and an adjustable height of up to 5".
It fits most 60° rod holders with cross pins. The mounting plate is constructed of durable Stainless Steel and the extension rod is constructed of resilient Aluminum for strength.
Compatible With:
All Kuuma grills
Features:
Allows you to turn your fishing rod holder into a grill mount
Adjustable Height
Fits most 60° rod holders with cross pins
Measurements: 13-inches (height) x 5-inches (width) x 5-inches (depth)
Dimensions (H x W x D) - 13" x 5" x 5"
Includes all necessary hardware for easy mounting
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.09 |
|
|
Triple Rod Holders
Scotty's multiple rod holder comes with a built-in lur and accessory rack, which give you quick access to your lures and tools
No. 362 Triple rod holder permanent mount board only
|
26.26 |
|
|
Rod Holder Gimbal Mount Fillet Table - 20"
Features:
Solid one-piece construction for long life and easy maintenance
Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
UV stabilized high-density polypropylene construction
Medium, 20" wide by 12-5/8" deep,
UV stabilized, high-density polypropylene
Assembles in minutes, with all assembly hardware included
Easily accessible knife and pliers holders
Knives and pliers not included
|
135.61 |
|
|
Rod Holder Gimbal Mount Fillet Table - 30"
Features:
Solid one-piece construction for long life and easy maintenance
Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
UV stabilized high-density polypropylene construction
Large, 30" by 12-5/8" deep with towel bar.
UV stabilized, high-density polypropylene
Assembles in minutes, with all assembly hardware included
Easily accessible knife and pliers holders, large has hose holder and towel bar
Knives and pliers not included
|
155.89 |
|
|
290 R-5 Universal Rod Holder w/Mount
The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.
The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.
Features:
Easy adjustable lock bar tension
Designed and built to withstand all conditions and backed by the Scotty name
In the Box:
290 R-5 rod holder
241 Side deck mount
*Sold as an Individual
|
25.96 |
|
|
Fillet Table Rod Holder Gimbal Mount
Gimbaled Rod Holder Mounting Accessory works on all of our fillet tables (326510-3, 326515-3, 326580-3, and 326585-3) and comes complete with hardware to mount to the table. Great for mounting a variety of accessories.
|
86.35 |
|
|
Drink Holder
Drink holder with bulkhead/gunnel mount and rod holder post mount
For cans, coffe mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removable
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
14.20 |
|
|
Dual Rod Holder
247
10" tube style rod holder. Gives you the ability to fish with 2 rods without mounting another rod holder. Designed for use with the No. 1026 Pedestal/Swivel Mount (Mounting hardware included).
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
77.62 |
|
|
Clamp-On Rod Holder Horizontal Mount - Aluminum - 2.375" - 2-3/8" OD - Black
Features:
Clamp-On
Horizontal Mount
Aluminum
2.375" - 2-3/8" OD
Black
Fits Pipe Size #5
|
115.38 |
|
|
DUAL AXIS ADJUSTABLE ROD HOLDERS DOWNRIGGER MOUNT
Mount our dual axis rod holders between the mounting base and swivel base of your Cannon downrigger for unparalleled rod positioning. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to easily pull the holder to a vertical position. Full 360 degree rotation makes it the ultimate fishing accessory.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
371.57 |
|
|
Allows rod holder to mount into the gunnel of the boat. Alignment key allows for 360 degree pivot while holding rod holder securely in place. Includes water-tight cap.
|
7.19 |
|
|
Baitcaster/Spinning Rod Holder without Mount
Holds a bait caster reel in a cushioned cradle.
A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side-mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in a holder with a soft latching strap that snaps over the top.
*Comes with no mount, enabling you to choose whichever mount suits your needs separately.
|
14.40 |
|