|
Stand Alone Rudder Angle Indicator System
Complete single station RAI system typically used on vessels that do not have a ComNav autopilot or, in cases where a separate RAI system is required (such as Hydraulic Full Follow-up steering systems). The Stand Alone System consists of three components:
ComNav Rudder Follower w/50' cable and linkage kit
RAI Distribution Box w/special circuitry
ComNav 3" Rudder Angle Indicator
|
1570.81 |
|
|
Analog Rudder Angle Indicator
The analog rudder angle indicator is a backlit 76mm (3in) gauge displaying the actual position of a vessels rudder. All ComNav Autopilots come with built in electronics to drive at least three meters without additional interfacing.
Features:
Flush mount
Water resistant front face
Supply voltage for lighting 12-32VDC
|
610.96 |
|
|
Rudder Angle Indicator Watertight Case
The Rudder Angle Indicator Watertight Case is a good alternative for outdoor applications where flush mounting the RAI may not be possible. In these cases or, when the back of the RAI may be exposed to moisture, we recommend the watertight case. The kit comes complete with case, O-ring seals, screws and two watertight cable glands.
|
169.91 |
|
|
Professional 85MM (3-3/8") Rudder Angle Indicator for NMEA 0183
Specially designed to fit into the standard 85mm panel cut, the Professional Rudder Angle Indicator is developed to suit commercial applications thanks to the embedded NMEA 0183 transceiver - which makes it operable with most of the professional autopilots out in the field - and the large 270° dial scale and Red illumination which makes it well readable and accurate in the indication.
It supports both 12V and 24V systems, and it is designed to resist the harshest environment thanks to its extended operating temperature from -30°C to +80°C and IPX7 protection class.
Able to support the analogue 3-180 Ohm and 0-5V rudder sensors, the Professional Rudder Angle Indicator also repeats the rudder angle data via NMEA 0183 to multiple gauges connected in series to it.
The embedded infrared (IR) pushbutton allows for a user-friendly fine tuning of the predefined calibration.
Features:
Designed for NMEA 0183
Easy programing and installation
Technical Specifications:
Operating Voltage - 8 to 32 V
Protection Class - IP6K7
Illumination - Red LED
Dial - Black w/graphics
Pointer - Red Illuminated
Lens - Plastic Double Lens (anti-reflective)
Operating Temp. - -40°C to 115°C
Connector - Molex MX150 - 12 pin
In the Box:
Gauge
Wire Harness
Mounting Spinlock
Safety Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
200.88 |
|
|
MK5 Rudder Angle Indicator
The Ruddermaster indicates at a glance how far the rudder is from a straight-ahead position. As the steering wheel is turned, the sending unit communicates the angle of the rudder to the calibration box. The calibration box transmits the rudder’s position to the meter.
The Ruddermaster can be used both as a steering aid and to monitor auto pilot systems. Raritan offers several styles of meters for readout as well as some that are splash proof. Repeating units can also be installed should there be a need for a readout at a station and not the main control panel.
Features:
Ready for installation with all necessary components needed - meter, calibration box and sending unit
Constant monitoring of rudder angle position from 0°-45°
Great aid for docking or close maneuvering
Each unit is assembled by hand, individually tested and backed by Raritan's 1-year Limited Warranty and legendary technical support team
Repeater units are available for multiple station readouts
Rudder Indicator with 4-1/2" flush mount panoramic meter
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
695.12 |
|
|
3-3/8" (85MM) ViewLine Rudder Angle Indicator -45°/+45° - 8 to 32V - Black Dial & Bezel
The ViewLine rudder angle instrument for wheel-controlled yachts and pleasure boats displays the current rudder position at all times. This indicator makes it easier to navigate out of harbors or through locks.
Only rudder instruments of the same diameter can be combined.
Specifications:
8 and 14 pole Tyco / Hirschmann bush housing
Operating voltage 8 – 32 V
Accuracy +/- 2.5 % of full scale reading
Anti-fog double lens
Protection rating front IP67, rear IP52
85 mm installation diameter
50 mm installation depth
Operating temperature range -20 °C / +70 °C
Reverse polarity protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
76.37 |
|
|
3-3/8" (85MM) ViewLine Rudder Angle Indicator -45°/+45° - 8 to 32V - White Dial & Bezel
The ViewLine rudder angle instrument for wheel-controlled yachts and pleasure boats displays the current rudder position at all times. This indicator makes it easier to navigate out of harbors or through locks.
Only rudder instruments of the same diameter can be combined.
Specifications:
8 and 14 pole Tyco / Hirschmann bush housing
Operating voltage 8 – 32 V
Accuracy +/- 2.5 % of full scale reading
Anti-fog double lens
Protection rating front IP67, rear IP52
85 mm installation diameter
50 mm installation depth
Operating temperature range -20 °C / +70 °C
Reverse polarity protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
76.37 |
|
|
ViewLine 52mm (2-1/16") Rudder Angle Indicator - 40° Port/Starboard
The ViewLine rudder angle gauge for wheel-controlled yachts displays the current rudder position at all times. An important cockpit gauge for accident-free maneuvers in narrow waterways.
Features:
8 pole Tyco/Hirschmann bush housing
Operating voltage 8–32 V
Current consumption <150 mA • Anti-fog double lens
Front side protection rating IP67
52 installation diameter
50 mm installation depth
*Sold as an Individual Piece
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
46.60 |
|
|
Chesapeake White SS 2" Rudder Angle Indicator Gauge
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
2"- Hole Size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC Negative Ground
Can be adapted for 24 VDC systems
Factory P/N GP7378
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
54.48 |
|
|
Newport SS 2" Rudder Angle Indicator Gauge
The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.
Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations. Perimeter lighting makes reading these gauges easy to read Day/Night.
Features:
Perimeter lighted Retro White Dial
Black and Gray Graphics
Domed fog resistant lens
Two-piece Black pointers
Hand-polished Stainless Steel bezel
Studded connection for ring terminals
Red illuminated edge-lighting
Technical Specifications:
Operating Range - Port to Starboard
2.06" (53 mm) Mounting hole
Operating Voltage - 12/24 V
In the box:
Gauge
Mounting Hardware
Installation Manual
Factory P/N GP8186
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
58.97 |
|
|
Chesapeake Black 2" Rudder Angle Indicator Gauge
Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N GP7377
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
52.37 |
|
|
Euro Black 2" Rudder Angle Indicator
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
2" - Hole size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GP7373
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
42.76 |
|
|
MK2 Rudder Indicator w/2" RD. Analog Panel Meter, Chrome, 12v
The Ruddermaster indicates at a glance how far the rudder is from a straight-ahead position. As the steering wheel is turned, the sending unit communicates the angle of the rudder to the calibration box. The calibration box transmits the rudder’s position to the meter.
The Ruddermaster can be used both as a steering aid and to monitor auto pilot systems. Raritan offers several styles of meters for readout as well as some that are splash proof. Repeating units can also be installed should there be a need for a readout at a station and not the main control panel.
Features:
Useful aid for docking or close maneuvering
Constant monitoring of rudder angle position from 0 to 45 degrees
Ready for installation with all necessary components needed - meter, calibration box and sending unit
MK2 model
2" Round
Sprayproof (IP64)
Backlit
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
704.65 |
|
|
SRA-1
Rudder Angle Indicator
Displays precision analog position reading.
A quick, positive, visual indication of rudder angle can be very important when docking or maneuvering a boat in tight quarters. It can save not only your gel coat but your pride. The SI-TEX SRA-1 Rudder Angle Indicator gives you a precise look at exactly where your rudder is positioned.
An easy-to-read 3-1/8" diameter analog faceplate displays, in high resolution, the rudder position from zero through fifty degrees to either port or starboard. High visibility white characters and scale registrations, along with red and green directional markings stand out from a black background. Where many other analog rudder angle indicators have a pointer at the twelve o'clock position on the dial, the SRA-1's zero position is at six o'clock. This configuration has the advantage of being more intuitive. The indicator moves in exactly the same way as the rudder relative to the boat.
The SRA-1 is designed for use with the SI-TEX SP-70 and SP-80 Autopilots, as well as others equipped with a rudder feedback transducer and an output connector for a rudder angle indicator. It will fit a standard 3-3/8" circular instrument cutout in a dash, or it can be mounted in an optional watertight ABS plastic case. Up to five SRA-1 units can be connected to a single SI-TEX autopilot.
|
630.00 |
|
|
1001 Autopilot
State-of-the-art Reliable Autopilot
Features:
Fixed station autopilot
Suitable for mid-sized vessels, in the range of 30 to 60 feet / 10 to 20 meters
Three "Turn" functions, Continuous, Emergency and "U" Turns
Compatible with most standard types of steering systems
Water resistant Control Head
Automatic trim
Adjustable yaw, turn rate and rudder settings
Easy course changes, from one degree to major changes
"Nav" mode accepts NMEA 0183 information
Fast and Slow Modes may be automatically implemented by Nav device
Ten selectable steering parameters for both Fast and Slow Modes
Digital display of rudder angle
Output for optional analog rudder angle indicator, up to 4 stations
Backlit LCD display for comfortable viewing
Adjustable brightness
Built-in diagnostics and self tests plus visual and audible alarms
Easy to install and fully compatible with your onboard instruments
Extended 3 year warranty
Meets CE requirements
Reliable in any sea and weather conditions
|
3439.26 |
|