Accessories for SeaStar jack plates.

High-speed hydraulic actuator lifts engines in 8.5 seconds. Rated for 300 HP engines. High output integrated actuator can raise and lower engines in all conditions. Fully captured slide mechanism gives complete rigid engine support at all lift positions. High visibility position scale for quick glance operation. Optional environmentally sealed non-contact SmartStick position sensor available for precise height information (sold separately). Integrated circuit breaker provides electrical protection right at the battery post. Anodized aluminum and stainless steel construction for corrosion resistance. Compatible with Power Pole® and Talon® anchor systems. IMPORTANT: JP5040R requires adapter kit DK4600 for Power Pole® or Talon® anchor systems mounting.

High-speed hydraulic actuator lifts engines in 8.5 seconds. Rated for 400 HP engines. High output integrated actuator can raise and lower engines in all conditions. Fully captured slide mechanism gives complete rigid engine support at all lift positions. High visibility position scale for quick glance operation. Optional environmentally sealed non-contact SmartStick position sensor available for precise height information (sold separately). Integrated circuit breaker provides electrical protection right at the battery post. Anodized aluminum and stainless steel construction for corrosion resistance. Compatible with Power Pole® and Talon® anchor systems. IMPORTANT: JP5040X requires adapter kit DK4600 for Power Pole® or Talon® anchor systems mounting.

High-speed hydraulic actuator lifts engines in 8.5 seconds. Rated for 300 HP engines. High output integrated actuator can raise and lower engines in all conditions. Fully captured slide mechanism gives complete rigid engine support at all lift positions. High visibility position scale for quick glance operation. Optional environmentally sealed non-contact SmartStick position sensor available for precise height information (sold separately). Integrated circuit breaker provides electrical protection right at the battery post. Anodized aluminum and stainless steel construction for corrosion resistance. Compatible with Power Pole® and Talon® anchor systems. IMPORTANT: JP5040R requires adapter kit DK4600 for Power Pole® or Talon® anchor systems mounting.

High-speed hydraulic actuator lifts engines in 8.5 seconds. Rated for 300 HP engines. High output integrated actuator can raise and lower engines in all conditions. Fully captured slide mechanism gives complete rigid engine support at all lift positions. High visibility position scale for quick glance operation. Optional environmentally sealed non-contact SmartStick position sensor available for precise height information (sold separately). Integrated circuit breaker provides electrical protection right at the battery post. Anodized aluminum and stainless steel construction for corrosion resistance. Compatible with Power Pole® and Talon® anchor systems. IMPORTANT: JP5040R requires adapter kit DK4600 for Power Pole® or Talon® anchor systems mounting.

AutoTrim Pro Sensor Kit This kit adds tab position indication functionality to classic hydraulic systems currently without indication capabilities. AutoTrim Pro (ATP) requires the presence of actuator sensor wires in order to display trim tab position indication LEDs (although all other ATP features will function without sensors). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Premium Replacement Throttle Position Sensor for Mercruiser Inboard Engines 1997-Present This throttle position sensor fits GM 5.7L, and 6.2L MPI Mercruiser inboard engines (1997-Up). Replaces: MERCRUISER Throttle Position Sensor 803148 OMC STERN DRIVE Throttle Position Sensor 3855296 VOLVO PENTA Throttle Position Sensor 3855296 SIERRA Throttle Position Sensor 18-7757 CDI ELECTRONICS Throttle Position Sensor E13-0008 *ARCO Assurance 12-month part and labor warranty protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Mirror/Bracket Kit w/VR-140 PRO Mirror & CFR-200 (Black) The PCC-140 PRO Combo offers the CFR-200 bracket AND the popular VR-140 HD panoramic mirror.  The VR-140 mirror has the 140-degree field-of-view allowing the driver to maintain 360 degrees of the boating experience.  All packed in a single box. The 6" x 20" VR-140 PRO offers unparalleled viewable range and clarity via prescription-grade optics.  For the first time ever, the boat driver can follow a skier or wakeboarder from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror.  The premium mirror is housed in a UV-resistant engineered polymer housing.  The spherical tension socket provides infinite positioning for superior stability in the roughest waters. The CFR-200 clamping mirror bracket is manufactured with carbon fiber composite material, providing extremely strong and rigid performance.  The patent-pending bracket design integrates "X" bracing for rigidity and interlocking components provide for functional flexibility.  In the upright performance posture, the bracket "locks" into place with the turn of a single knob, preventing the bracket from loosening and changing position.  Another simple twist of the knob releases the "lock" and with an upward tug, the bracket slips from its interlocking nest, allowing the bracket to be dropped below the windshield for covering and transportation, without removal.  The CFR-200 installs in minutes with a 1/4" allen wrench.  The CFR-200 will accommodate all but a few specialty windshield trims and is American made. In the Box: VR-140 PRO (Black) CFR-200 Mirror Bracket (Black) Ultra-High Bond, Pressure-Sensitive Adhesive  Easy-to-Follow Installation Instructions with Mounting Template Click Here to Find Your Mirror Bracket *Does not include cover *Sold as an Individual

Mirror/Bracket Kit w/VR-100 PRO Mirror & CFR-200 (Black) The PCC-100 PRO Combo pack offers the CFR-200 carbon fiber bracket and the popular VR-100 PRO HD panoramic mirror in a single box. The 6" x 14" HD VR-100 PRO mirror offers unparalleled viewable range and clarity via prescription-grade optics. The premium mirror is housed in a UV-resistant, engineered polymer housing.  The spherical tension socket provides infinite positioning for superior stability in the roughest waters.  The CFR-200 clamping mirror bracket is manufactured with carbon fiber composite material, providing extremely strong and rigid performance.  The patent-pending bracket design integrates "X" bracing for rigidity and interlocking components provide for functional flexibility.  In the upright performance posture, the bracket "locks" into place with the turn of a single knob, preventing the bracket from loosening and changing position.  Another simple twist of the knob releases the "lock" and with an upward tug, the bracket slips from its interlocking nest, allowing the bracket to be dropped below the windshield for covering and transportation, without removal.  The CFR-200 installs in minutes with a 1/4" allen wrench.  The CFR-200 will accommodate all but a few specialty windshield trims and is American made. In the Box: VR-100 PRO (Black) CFR-200 Mirror Bracket (Black) Ultra-High Bond, Pressure-Sensitive Adhesive  Easy-to-Follow Installation Instructions with Mounting Template Click Here to Find Your Mirror Bracket *Does not include cover *Sold as an Individual

12" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit - 12V  Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts. Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches. Kit includes:  Self-contained sealed keypad Control box 36" Pigtail Specifications: Suggested Boat Length: 17' to 30' Length of Tab: 12" Width of Tab: 12" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Standard Tactile Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Limited Space Trim Tab Kits 12-Gauge Blades / 12-Volt Actuators Lenco Electric Limited Space Trim Tab Kits are ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge - 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible. Kit Contents 2 each of 12-gauge 304 stainless steel trim tab blades 2 each of #15054-001 Standard actuator with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting bracket with gland seal 1 each of the Lenco owner's / installation manual All necessary stainless steel mounting hardware Specifications Trim Tab Kit: Limited Space Blades: 12 Gauge Stainless Steel Finish: Electro-Polish Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Made in: Stuart, Florida U.S.A. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airboat Trim Tab Kits 12-Gauge Blades / 12-Volt Actuators Lenco Airboat Electric Trim Tab Kit was designed exclusively for airboats. Engineered with a short Extreme Duty Actuator and a unique mount that allows maximum plate movement and safe upward position when running in shallow water and on land. This system eliminates porposing and helps to create a smoother ride. Blade is 12 gauge - 304 SS with 5/8" flared trailing edge and 1" Custom Hinge with 1/8" diameter hinge pin. Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Kit Contents 1 each of 12-gauge 304 stainless steel trim tab plane 1 each of #15055-001 XD actuator with 6' lead and Deutsch plug 1 each of #30133-002 14' actuator extension wiring harness 1 each of #15085-001 (116) upper mounting bracket with gland seal 1 each of the Lenco owner's/installation manual All necessary stainless steel mounting hardware Specifications Trim Tab Kit: Airboat Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Made in: Stuart, Florida U.S.A. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Edge Mount Trim Tab Kit w/LED Indicator Switch Kit Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Suggested Boat Length:16'-25' L" x W": 9" x 12" Hinge Height: 2" Minimum Transom Height: 13.5" Kit Contents 2 each of 12-gauge stainless steel trim tab blades 2 each of #15054-001 actuator with 6' leads & Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting brackets with gland seal 2 each of #50014-001 (119) lower mounting brackets 1 each of the Lenco owner's / installation manual All necessary stainless steel mounting hardware Specifications: Blades: 12 Gauge Stainless Steel Finish:Smooth Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat LED Indicator Switch Kit With Built-In Retractor & Self-Check Features For Single Actuator Systems / 12 & 24-Volt Lenco Waterproof Trim Tab Tactile Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches. The Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof, and has an over-molded connector to eliminate water intrusion. L.E.D. indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions. The standard tactile switch is built to all the same exacting standards as the indicator switches. Kit Contents Self-contained sealed Key Pad Control box 36" Power Pigtail. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

9" x 9" Standard Performance Trim Tab Kit w/o Switch Kit- 12V Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades Kit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 13' to 20' Length of Tab: 9" Width of Tab: 9" Minimum Transom Height: 13.5" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit- 12V Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades Kit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 16' to 26' Length of Tab: 9" Width of Tab: 12" Minimum Transom Height: 13.5" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.