|
2.4 GHz Wi-Fi Marine Antenna - 4'
Getting and staying connected on the water has never been easier. Digital Antenna's 2.4GHz premium quality 10dB gain omni-directional antennas achieve optimal signal range on 802.11 b/g wireless LANs, Bluetooth and multipoint radio equipment where high gain and wide coverage is desired.
Features:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
10dB gain
Mount: Standard 1"-14 threaded base
Connector: Male
Cable: Not included - use our PowerMax™ low loss antenna cables
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
329.66 |
|
|
528-VW 4' VHF Antenna with 15' Cable - White
Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of Digital's antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
Features:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 15' of Digital's low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
218.15 |
|
|
AIS Antennas
4' Length, 4.5dB Gain
In conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 4 AIS antennas that meet the exacting AIS frequency requirements. Designed with a low 1.5:1.0 SWR ratio from 159-162 MHz, Digital Antennas 4.5 dB gain AIS antennas offer unsurpassed durability and performance compatible with all AIS transponders.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the AIS transponder easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
All 4' AIS Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
500 GOLD Series
Mount: Standard 114 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 25 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
285.22 |
|
|
VHF Antenna
4.5dB Gain
Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
4' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 15 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
241.58 |
|
|
AIS Antennas
4' Length, 4.5dB Gain
In conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 4 AIS antennas that meet the exacting AIS frequency requirements. Designed with a low 1.5:1.0 SWR ratio from 159-162 MHz, Digital Antennas 4.5 dB gain AIS antennas offer unsurpassed durability and performance compatible with all AIS transponders.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the AIS transponder easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
All 4' AIS Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
500 GOLD Series
Mount: Standard 114 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 25 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
308.65 |
|
|
AIS Antennas
4' Length, 4.5dB Gain
In conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 4 AIS antennas that meet the exacting AIS frequency requirements. Designed with a low 1.5:1.0 SWR ratio from 159-162 MHz, Digital Antennas 4.5 dB gain AIS antennas offer unsurpassed durability and performance compatible with all AIS transponders.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
All 4' AIS Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
800 GOLD Series
Mount: Stainless steel double female ferrule for mounting 114 threaded base
Connector: Quality female SO-239 (UHF female)
Cable: Not included use our VHF/AIS cables and two DA645 connectors
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
317.53 |
|
|
AIS Antennas
4' Length, 4.5dB Gain
In conjunction with the USCG Automatic Identification System (AIS) requirements for commercial vessels, Digital Antenna created a series of 4 AIS antennas that meet the exacting AIS frequency requirements. Designed with a low 1.5:1.0 SWR ratio from 159-162 MHz, Digital Antennas 4.5 dB gain AIS antennas offer unsurpassed durability and performance compatible with all AIS transponders.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
All 4' AIS Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
800 GOLD Series
Mount: Stainless steel double female ferrule for mounting 114 threaded base
Connector: Quality female SO-239 (UHF female)
Cable: Not included use our VHF/AIS cables and two DA645 connectors
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
329.66 |
|
|
4' Cellular Antenna
Digital Antenna's 1100 series antennas with a collet ferrule ensure no cable twisting and allows the antenna to be removed when needed. This new technique allows the use of existing coax or a new run of premium low loss cable. A taperedcollet securely locks Digital Antenna's 1100 series antenna to the bottom ferrule which mounts standard 1"-14 threads. All marine antennas are manufactured in the USA with 316 surgical stainless, UV stable high gloss finish and precision soldered components.
Features:
Sleek, rugged design
Locking collett allows antenna to be attached without twisting cable
Large connector pass thru
Mounts to standard 1"-14 mount or mount with U-bolt to a pole
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
404.00 |
|
|
826-VW 4' VHF Antenna - White
Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years.
All of Digital's antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
Features:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
4.5dB gain
800 GOLD Series:
Mount: Stainless steel double female ferrule for mounting 1"14 threaded base
Connector: Quality female SO-239 (UHF)
Cable: NOT Included
Use Digital's VHF/AIS cables and 2-DA645 connectors
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
282.79 |
|
|
WindSense - Wi-Fi Wireless Wind System
WindSense is a wireless wind system designed to allow iPads, tablets, SmartPhones and PCs to display accurate apparent wind speed and direction. It features a high quality, precision mast head sensor with 20m cable that connects to a below decks interface unit providing a wifi and NMEA 0183 wired connection. Existing NMEA compatible sensors can also be connected to the NMEA input to allow the wireless network to share other available on board instrument data. It's compatible with a wide range of apps for iOS and android. The built in wifi will typically footprint a GRP boat up to 30m.
Features:
Stand alone or networkable (via NMEA 0183) wind system with precision mast head unit
Wired connection with super-thin cable from MHU to below deck interface with wireless WiFi and wired NMEA connections
Ultra tough Igildur™ mast head unit bearings for exceptional life and corrosion resistance
Full range of apps for iOS & Android plus compatible with multiple PC and MAC apps
Support for up to 7 Wi-Fi connected devices - use multiple smart phones, iPads or tablets as a display at the helm, chart table or on deck
NMEA 0183 output
NMEA 0183 (4800 or 38400 baud) input with multiplex facility for WiFi connection
Wi-Fi can be standalone or joined to existing network
Minimal power consumption
Optional NMEA 2000 interface
Installation is easy with an ultra thin mash head unit cable with removable connector which plugs directly into the interface unit.
|
554.35 |
|
|
4' VHF/AIS White Antenna with 15' Cable
The 594-MW is one antenna designed for the best performance on VHF and AIS signals. To ensure the most incredible AIS and VHF range, Digital Antenna’s new 4.5dB gain AIS/VHF antenna features a less than 1:5:1 SWR on both the VHF (156MHz) and AIS (162MHz) frequencies.
Digital VHF radio-based transponder systems need antennas designed for digital signals. Digital Antenna is the only manufacturer to design all antennas to maintain and maximize digital signals for the best transmit and receive range.
Ideal for use on any size commercial or recreational vessel. Perfect for use with combined VHF/AIS radios. Factory-installed mini-UHF connector (less than 3/8” OD) and included PL259 adapter make a quick and secure connection to the radio. (no soldering needed).
Features:
Designed for Digital AIS/VHF signals
4.5dBi Omni-directional gain
Rugged fiberglass rod with UV stable finish
Secure soldered connections
316 stainless steel base
1”x14 female threaded base
15’ premium low-loss RG-8X cable
Factory-installed mini-UHF connector
5-year warranty
Specifications:
Radiation: Pattern Omni-Directional
Gain: 4.5dBi
Bandwidth: VSWR: < 1.5:1 = 1 56-162.5 MHz (6.5MHz)
Cable: 15’ Digital Antenna exclusive low loss RG-8X
Impedance: 50 ohms
Max Input Power: 50 watts
Exterior Finish: White polyurethane high gloss UV stable
Dimensions: 4’ length x 1” OD taper
Weight: 1.7 lbs
RF Connector: Mini-UHF female with included PL259 adapter
Installation: 1”x14tpi female threaded base
Elements: Brass - Hand soldered
Polarization: Vertical
Wind Rating: >160KPH
Operating Temp: 30º F to +175º F
Warranty: 5 Years
Compliance: Automatic Identification System (AIS)
Use with all AIS class A and B transceivers, AIS transponders, Smart AIS transponders, AIS receivers, auxiliary civil services, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrow band FM, VHF SATCOM, Automatic Identification System (AIS), and NOAA Weather Stations.
Applications:
Commercial
Recreational
Government vessels where AIS is required
|
232.70 |
|
|
529-VW-S 8' VHF Antenna - White
6dB Gain
Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
8' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
6dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 20' of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
347.44 |
|
|
529-VB-S 8' VHF Antenna - Black
6dB Gain
Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.
8' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
6dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 20' of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
375.73 |
|
|
532-VW-S 16' Antenna - White
10dB Gain
A favorite of marine professions, our largest VHF antennas offer the power and durability to achieve maximum range and extended performance, even in the roughest seas. A powerful gain of 10dB and solid construction make Digital Antennas 16 VHF antennas the ideal choice for critical communication onboard large yachts, commercial vessels and base stations.
Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. UPS shippable.
Our 16' VHF antennas require a side support 3' to 4' from the base of the antenna.
All 16' VHF Antennas Feature:
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
10dB gain
500 GOLD Series:
Mount: Standard 1"14 threaded base
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
Cable: Includes 20 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1042.40 |
|
|
532-VW-RS 16' White VHF f/RUPP Mounts
10dB Gain
** Designed to be used with RUPP Antenna Mounts **
A favorite of marine professions, our largest VHF antennas offer the power and durability to achieve maximum range and extended performance, even in the roughest seas. A powerful gain of 10dB and solid construction make Digital Antenna's 16' VHF antennas the ideal choice for critical communication onboard large yachts, commercial vessels and base stations.
Customers and installers love the 500 GOLD Series' easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors.
All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. UPS shippable.
16' VHF antennas require a side support 3' to 4' from the base of the antenna
Features:
Pre-installed RUPP collar
Powerful brass radiators
Soldered connections
Power directing ferrite choke bead
High gloss urethane finish
316 stainless steel ferrule
10dB gain
Cable: Includes 20’ of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable
Mount: Standard 1"–14 threaded base (RUPP support arm required)
Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1098.16 |
|