|
LANLink NMEA 0183 To Ethernet Gateway
More and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.
LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.
It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.
Features:
NMEA 0183 to ethernet gateway version
12/24v DC low power operation
Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection
The web user interface for easy setup from the connected device via the browser
TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP
Bi-Directional
The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS
RS232 port for PC apps too
Status indicators for power, data in-out, network link, and server status
Set-Up:
Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup
Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port
Set up with fixed or dynamic IP address
Status page for system diagnostics
Specifications:
Power: 10-35V DC (Consumption approx. 50mA at 12V DC)
Network Port: Ethernet RJ45 10/100MB
IP Mode: Static or DHCP
Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation
NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183)
NMEA 2000 option via iKonvertgateway
Operating temp: -25 to +70 degrees C
LED Indicators: Power -Status -Link -Data In -Data Out
Options: RS232 connectivity (non-concurrent with NMEA)
Dimensions (W x H): 95mm x 86mm
|
193.15 |
|
|
NavAlert NMEA Monitor & Alarm System
NavAlert is Digital Yacht’s latest innovation and allows an alarm to be set for any parameter that’s available on the boat’s NMEA 2000 network. That could be navigation data such as depth, heading, or speed, as well as electrical data such as voltage and engine/generator data including temperature, pressure, tank levels, fuel flow, etc.
It connects anywhere on the NMEA 2000 network and takes power from this connection, so installation is super simple. A local WiFi network is created by NavAlert, so setup is possible via any smartphone, tablet, or PC. Simply choose the parameter to monitor and set an alarm level.
Alarms/Alerts
Integrated into NavAlert is a custom alarm for anchor drift using an algorithm to calculate the optimum drift radius based on depth and the scope of the chain for reliable notifications. There’s also an anti-collision alarm based on CPA (closest point of approach) and TCPA (time to the closest point of approach) AIS data from a connected AIS. These alerts can also be monitored through the wireless interface with attractive graphical displays of current status.
Alarms can also generate an SMS message, which can be relayed through Digital Yacht’s 4GXtream internet connectivity solution, allowing remote monitoring, which is great for feeling secure that the anchor is holding well when enjoying a lunch ashore. Alarms are independent of any alarms set on a plotter, allowing NavAlert to operate even without a primary multi-function display being powered up (an important feature for power-limited sailboats).
Alerts can also be relayed to compatible multi-function devices (Garmin supports this function) for a pop-up data window indicating an alert and the ability to acknowledge it.
*NavAlert is universal, using the industry standard NMEA 2000 data protocol, so it will integrate with all leading brands and systems.
Operation
The operation is simple. Simply search for the WiFi network that NavAlert creates and connect via a smartphone or tablet. Open a browser and connect to NavAlert, and users are presented with a clear graphical interface allowing easy setup, configuration, and viewing of the alerts and network data. NavAlert constantly monitors the whole network, so alert parameters can be set for any variable.
Users can configure the NavAlert through its simple web interface. Just open a web browser, enter the NavAlert’s IP address, and users can change the network name and password, or even merge the WiFi to an existing WiFi network on board… So no complicated programming software or app is required.
Features:
Multiple parameters can be monitored
Specifications:
Universal NMEA 2000 alarm and monitoring solution
Set a configurable audio and visual alarm for any parameter on the NMEA 2000 network – for instance: shallow depth, low fuel level, off course, engine temp, tank levels, low voltage, etc
Relay the alert via the NMEA 2000 bus to a Garmin multi-function display to deliver a popup alarm window
SMS alerting through Digital Yacht’s 4G Xtream system to a mobile – ideal for remote monitoring of the boat.
Built-in unique anchor drift alarm
Built-in AIS collision avoidance alarm
What’s In the Box:
1m NMEA2000 drop cable
WiFi antenna built-in
|
302.35 |
|
|
LANLink NMEA 2000 To Ethernet Gateway
More and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.
LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.
It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.
*This version ships with an iKonvertNMEA Certified gateway
Features:
NMEA 2000 to ethernet gateway version
The NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options)
12/24v DC low power operation
Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection
Web user interface for easy setup from the connected device via browser
TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP
Bi-Directional
The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS
RS232 port for PC apps too
Status indicators for power, data in-out, network link, and server status
Set-Up:
Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup
Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port
Set up with fixed or dynamic IP address
Status page for system diagnostics
Specifications:
Power: 10-35V DC (Consumption approx. 50mA at 12V DC)
Network Port: Ethernet RJ45 10/100MB
IP Mode: Static or DHCP
Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation
NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183)
NMEA 2000 option via iKonvertgateway
Operating temp: -25 to +70 degrees C
LED Indicators: Power -Status -Link -Data In -Data Out
Options: RS232 connectivity (non-concurrent with NMEA)
Dimensions (W x H): 95mm x 86mm
|
293.95 |
|
|
4G Connect Pro 2G/3G/4G Dual Antenna
Digital Yacht's 4G Connect is a 2G/3G/4G (LTE) internet access solution for use afloat. It utilizes the latest MIMO technology with dual antennas for fast, long-range access and incorporates a full-function wifi router so multiple devices can connect wirelessly. There is also a wired LAN port and WAN port – for connection to high-power wifi devices or satellite modems.
The Pro model ships with two external hi-gain antennas for exceptional long-range performance and is the recommended solution for use afloat.
4G Connect has an easy-to-use interface. It is SIM unlocked so users are free to use any cellular provider they choose.
Operation is simple – turn on, connect to the password-protected wifi hotspot that 4G Connect creates and your device is online. Digital Yacht’s WL510 high-power wifi solution can also be connected to the WAN port for a choice between hotspot wifi and 4G connectivity. iKommunicate can also connect to the LAN port providing boat NMEA data on the wifi network for use with navigation apps.
Features:
Hi-performance 4G/LTE modem for exceptional speed and range with fall back to 2G/3G
SIM unlocked for any network provider
Supplied with 2 x high performance external 48cm antennas for optimum speed and range
7m low loss LMR 200 cable kit included
Supplied with deck base for antennas (as shown)
LTE Class 3 modem offers long range and up to 70Mbps speeds
The recommended solution for offshore use and non-GRP vessels
Wifi interface for tablets and phones
Ethernet LAN port for connection to iKommunicate navigation interface – allows boat NMEA 0183/2000 data to be available on the wifi network – ideal for smartphone and tablet navigation
Ethernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE/WiFi hotspot solution
12V DC operation with <5W power consumption
Optional 1” base adaptor available for antennas
Optional 10 & 20m LMR400 assemblies
Supplied With:
7M Cable Kit
|
789.55 |
|
|
iKonvert NMEA 2000 Gateway with ISO Interface
The iKonvert NMEA2000-0183 Gateway/Converter is an intelligent and flexible gateway for allowing new NMEA2000 equipment to talk to legacy NMEA0183 equipment. Conversions are bi-directional, so whether you want to get the data from older NMEA0183 sensors on to your NMEA2000 network or you have added a new NMEA2000 only MFD and want it to send GPS and Navigation data to your older NMEA0183 VHF and Autopilot, iKonvert will accurately and intelligently carry out the required data conversions.
There are many, many real life applications for NMEA2000 to NMEA0183, with a plethora of different makes and models of equipment that may need to be connected together. We have designed iKonvert to satisfy as many of these situations as possible by incorporating a simple but effective mode selection method, via a set of DIP switches inside iKonvert. Just remove two screws, open the iKonvert box and using a small screw driver, select the mode you need. The next time iKonvert powers up, it will automatically carry out the conversions you selected.
A number of modes have already been defined including; Heading, Sounder, AIS, GPS, Wind, Instruments and an all data gateway mode, which automatically sets the conversions to be done and the baud rate iKonvert will use. What is more, if you need a mode that we have not defined yet, just let us know and we will consider including it.
Digital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral NMEA0183 cable and standard NMEA2000 Micro drop cable (male). Taking its power from the NMEA2000 network, and providing full galvanic isolation between the NMEA0183 and NMEA2000 networks, iKonvert is the perfect solution for all NMEA conversions.
For customers that want to take this converted data in to a computer, please consider the iKonvert USB gateway, that features an integral USB cable that is compatible with all of the popular operating systems (Windows/Mac/LINUX/Android).
Features:
Small but powerful bi-directional NMEA2000 to NMEA0183 Converter
Powered from the NMEA2000 network
Opto Isolated NMEA0183 Interface
Converts AIS, GPS, Navigation, Instrument and XDR data
Features “Real Life” data modes for most common installations
Simple configuration of data modes using DIP switches
Integral NMEA0183 cable and NMEA2000 Micro (Male) cables
Full galvanic isolation
|
176.35 |
|
|
4G Connect 2G/3G/4G Internet Access
4G Connect is a new 2G/3G/4G (LTE) internet access solution for use afloat. It utilises the latest MIMO technology with dual Antennas for fast, long range access and incorporates a full function wifi router so multiple devices can connect wirelessly. There is also a wired LAN port and WAN port – for connection to high power wifi devices or satellite modems.
The Standard model has built in Antennas which are fine on most fibreglass (GRP) hulled boats and will provide good performance when in port and close to shore. For carbon fiber, wooden or metal hulled vessels, or for boat owners that want the maximum possible range, we would recommend our 4GConnect Pro model with external high gain antennas.
4G Connect has an easy to use interface and it is SIM unlocked so users are free to use any cellular provider they choose. Users in Europe are recommended to utilize a Vodafone SIM as this provides excellent maritime performance.
Operation is simple – turn on, connect to the password protected wifi hotspot that 4G Connect creates and your device is online. Digital Yacht’s WL510 high power wifi solution can also be connected to the WAN port for a choice between hotspot wifi and 4G connectivity. iKommunicate can also connect to the LAN port providing boat NMEA data on the wifi network for use with navigation apps.
Features:
Hi performance 4G/LTE modem for exceptional speed and range with fall back to 2G/3G
SIM unlocked for any network provider • Internal Antenna solution with MIMO technology
LTE Class 3 modem offers long range and up to 70Mbps speeds
Wifi interface for tablets and phones
Offers good performance in port on GRP boats
Ethernet LAN port for connection to iKommunicate navigation interface – allows boat NMEA 0183/2000 data to be available on the wifi network – ideal for smartphone and tablet navigation
Ethernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE/WiFi hotspot solution
12V DC operation with <5W power consumption
Easy installation
Easily upgradable to PRO with purchase of external Antennas and cabling
Dimensions:
380mm x 125mm x 55mm (L x W x H)
Supplied With:
1m power cable
Modem/router
2 Internal Antennas
|
503.95 |
|
|
veKonvert NMEA 2000 Gateway
veKonvert brings NMEA 2000 connectivity to Victron’s popular SmartShunt battery monitoring system. Now a navigation multi-function display becomes a sophisticated battery and energy management system.
Features
veKonvert is a stand-alone NMEA 2000 interface designed in conjunction with Victron Energy to integrate VE.Direct compatible devices such as their SmartShunt, BMV Battery Monitors, and MPPT Solar Charge Controller range into NMEA 2000 systems.
This functionality already existed but required the use of a sophisticated Cerbo module. veKonvert is a lower-cost, simpler solution for smaller installations that just need the electrical data displayed on a multi-function display.
Boaters and boat builders like a clear and uncluttered dash or nav area, so integrating electrical data into the main navigation display is a popular and cost-saving option.
The product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.
Victron solar panel controllers (MPPTs) and battery monitors can now also interconnect to NMEA 2000 via the veKonvert interface.
Installation
Installation is simple – just "T" into the NMEA 2000 backbone and plug into the VE.Direct custom connector on the SmartShunt, and you've got battery and electrical data on your NMEA 2000 network!
Specifications:
Universal NMEA 2000 gateway for Victron products with a VE.Direct interface
(see compatibility list in the FAQ tab)
Enables battery management or solar charge monitoring on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc)
Provides battery voltage, charge/discharge current, state of charge, and time to depletion based on a sophisticated algorithm
Easy installation, plug ‘n’ play connectivity, and self-powering from the NMEA 2000 bus
Generates NMEA 2000 alerts from any BMV or SmartShunt Alarms
Supports multiple SmartShunts for a larger multi-battery system
Vekonvert Is Compatible with the Following Victron Products:
BMV -700, BMV -702, BMV -700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart Rev2, SmartShunt 500A/50mV, SmartShunt 1000A/50mV, SmartShunt 2000A/50mV, and All MPPT Charge Controllers
NOTE: veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron "Consumers" such as Multiplus, Quattro, Cerbo, etc.
|
176.35 |
|
|
iSeaSense Wireless Speed Depth Temp Pack Plus Wind
Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity. This pack includes speed, depth, temperature transducer plus wind sensor.
Digital Yacht iSeaSense is a range of complete marine instrumentation packs based on NMEA 2000 and wireless connectivity, allowing maximum flexibility and connectivity. Choose from using phones, iPads, and tablets for boat data displays as well as 3rd party industry-standard instruments and multi-function displays.
Operation:
You can access the iSeaSense dashboard through its web interface, just open your web browser, enter the iSeaSense’s IP address or iSeaSense.local and you will access the attractive dash to display all your instrument data. So no complicated programming software or app is required.
By default, iSeaSense has a series of pre-defined pages that display digital databoxes and analog “instruments” of the instrument and navigation data available on the NMEA 2000 network.
With iSeaSense you’re in control of the data you see. The pages are fully editable, so any databox can be configured for the information you want and you can easily add and remove databox to build your perfect display. The configuration can also be saved and shared – ideal for standard configurations for production boats and OEMs.
Key Features:
Top quality and highly accurate sensors are used for boat depth, speed, wind, compass, and GPS data. Data can be shared with other devices on the NMEA 2000 network too.
iSeaSense is easy to specify. Everything is included as two main starter packs for easy installation and ordering. No app is needed either as the iSeaSense wireless server creates powerful graphical and numeric display pages that can be viewed via a browser on any device.
iSeaSense includes the WND100 wind sensor with 20m cable and an interface to “T” directly to the NMEA 2000 backbone. It means there’s no heavy NMEA 2000 cabling to the top of the mast and no need for complex mast top terminations for the Wind Sensor.
iSeaSense also includes depth, speed, and temperature sensors. A spatial sensor is also included for detecting pitch and roll and there’s a sophisticated algorithm for calibrating boat speed information based on heel.
A full NMEA 2000 backbone cabling back the wireless interface for connectivity and a spare cable and connection point for additional NMEA 2000 devices are included.
With NMEA 2000, expanding the system is easy and you can add any Digital Yacht’s instruments such as GPS, AIS, electronic compass, and more. You can also send the instrument data to your NMEA 2000 chart plotter or display.
iSeaSense features an easy-to-use web interface. No apps are required. Simply open the browser on a connected device, navigate to iSeaSense.local, and the optimized touchscreen display is ready.
You can calibrate the wind sensor via the iSeaSense web interface and also displays true and apparent wind speed and angle plus VMG calculations.
The web interface works on iOS, Android, PC, Linux, and MAC – any standard web browser as well as e-ink displays like Kindle and e-book. It supports up to 3 connected devices with super fast 5Hz updates.
The data can also be used by 100 popular navigation apps & software such as Navionics, TZ iBoat, OpenCPN, SailGrib, etc.
iSeaSense Pack Features:
Pack includes iSeaSense wireless server, NMEA 2000 cabling, and advanced boat depth, speed, and temperature transducer with pitch and heel sensor
Pack also includes WND100 mast head wind sensor – adding wind data to the system and network
Easy to install mast head unit with 20m cable and NMEA 2000 interface
iSeaSense server creates beautiful graphic display pages of data with fast 5Hz updates viewable on any smartphone, tablet, or iPad
Advanced calibration routing is available for the transducer with corrections for the boat heel and transducer location
Calibrate the wind sensor via the iSeaSense interface
Includes extra NMEA 2000 T piece for system expansion allowing easy addition of sensors or displays
Interface Features:
NMEA 2000 interface and wireless gateway for iSeaSense system. Integrated instrument display page server.
Configurable display pages for depth, speed, temp, time, GPS, wind, navigation, and compass
Network diagnostics, settings, and calibration capability
Data logging
Self-powered from NMEA 2000 backbone
Integrated wifi antenna typically footprints boats up to 20m
Supports additional TCP/IP and UDP data connections for 3rd party apps on up to 7 connected devices (outputs GPS, AIS, depth, wind, and speed information from NMEA 2000 bus)
Transducer Features:
Transducer for depth, boat speed, water temperature, and boat heel/pitch with fast, super accurate 5Hz speed updates from 0.3 to 45 knot
Data Update Rate: Depth: 1X/second, Speed: 5X/second, Heel/Trim: 10X/second
235KHz depth operation to minimize interference with 50/200KHz fish finders and sounders
Max depth 100m
Supports up to 22-degree hull deadrise
Supplied with 6m NMEA 2000 cable and self-powered from iSeaSense NMEA 2000 backbone
Standard 2” thru hull size/diameter
Includes Bluetooth interface for advanced calibration and set-up features if required
Stainless steel and bronze skin fittings available as an option
Wind Sensor Features:
The WND200 package comprises a WND100 mast head unit plus iKonvert NMEA 0183-2000 interface supporting 5Hz fast wind mode
8-18V power with ultra-low 25mA power consumption
Supplied with 20m ultra thin 4mm masthead cable for easy cable runs through mast (4 core screened)
iKonvert NMEA 2000 interface included for system integration
Wind angle accuracy is better than 4 degrees
Wind speed accuracy better than 3%
Min wind speed 1.7 knots – max 80 knots
Settling time typically 1.3 seconds
|
1255.80 |
|
|
NMEA 0183 Interface Cable
The NMEA 0183 interface provides a bi-directional gateway between an NMEA 2000® network and NMEA 0183 devices.
Ideal for retrofitting NMEA 2000 devices while retaining existing NMEA0183 components, this interface allows boaters a simple way to upgrade to newer technology, sensors, and devices without replacing a whole system. For existing NMEA 2000® networks and systems, this also allows a user to add NMEA 0183 devices to your network, allowing you to choose the products best suited to your boat and sailing.
Simple mounting, connectivity, and a low-profile design allow for easy installation.
Features
Easy to install
Allows older products to connect to new, more modern products
Supports NMEA 0183 Version 4.1
Filter NMEA 0183 rx/tx sentences and configure transmit frequency via Navico®
Compatible with Lowrance®, Simrad®, and B & G® MFDs and instrument displays
NMEA 2000 Compliant
Standard Micro-C connector
|
179.99 |
|
|
5G Xtream System with 3 Antennas & 7M Cable
For boat owners looking for ultra-fast internet on board, the new 5G Xtream from Digital Yacht offers 4G and 5G connectivity as well as integration with Starlink satellite systems for the best and most affordable blended internet afloat.
The 5G Xtream can support 5G (shoreside) connection speeds up to 3.1GB/s but also integrates a 4G Cat 20 modem, which offers connectivity up to about 25NM from shore at speeds of up to 2GB/s. The system uses three external antennas with dual high-gain vertical antennas and a separate compact dome for the higher 5G frequencies. This MIMO technology and, critically, separate antennas give optimum performance. There’s support for dual SIMs with auto (failover) or manual switching between operators.
The 5G Xtream features dual-band (2.4 and 5GHz) wireless connections, so users on board simply search for the secure wifi point and connect. There are also 4 LAN ports (10/100/1000 MB) for wired devices like smart TVs and a WAN port that is optimized for Starlink satellite connectivity, allowing the 5GX to act as a sophisticated and fast router for all on-board internet communications.
The Wi-Fi router can also be configured to access marina wifi hotspots as an additional method of internet access. This also supports the very latest 5GHz marina wifi services, and there's also a high-gain external wifi antenna available as an accessory.
For advanced users, the 5G Xtream allows for user management, VPNs, blacklists, and IOT applications. NMEA 0183/2000 data can also be connected using Digital Yacht’s LANLink devices. The integrated GPS allows for SMS reporting of boat position or even a geofence/drift setting when the boat is at anchor or in port.
The Digital Yacht 5G Xtream is supplied as a complete solution with antennas, mounts, and cabling – all that’s additionally required is a cellular SIM.
Configuration
Configuration is very simple. Just insert the SIM cards. The 5G Xtream has two standard SIM slots, and it is possible to fit two SIMs from two different network operators. By default, the 5G Xtream will query the SIM that is installed and automatically select the APN settings from its internal database.
However, it is very important that users “lockdown” their wireless network with their network name (SSID) and wireless password. This task only takes a couple of minutes and is done via the 5G Xtream web interface.
User Interface
Accessing 5G Xtream functionality is done via an easy web interface. Any locally connected device can simply enter the IP address into the password-protected interface to set up functions, view traffic and logs, and configure wifi.
Once set up, there should be no requirement to log in other than for diagnostics and configuration. Users simply access the internet through the wifi connection, just as they would in the home or office.
Features:
Ultra-fast 5G internet afloat solution with speeds up to 3.1GBs plus also integrates the latest 4G Cat 20 LTE MIMO technology with a range up to 25NM offshore (network dependent) and 4G connection speeds up to 2GBs
Dual SIM slots with auto-failover or manual selection
Two external, high-gain, wide-bandwidth antennas plus a compact high-gain dome antenna for higher 5G frequencies
Dual-band integrated wifi router (2.4 & 5 GHz)—independently configurable
Built-in GPS with an external patch antenna for IOT and tracking/anchor alarm applications
4 x LAN ports
1 x WAN port for additional internet connectivity, optimized for Starlink satellite systems
Digital input/output connectivity for IoT/control applications
SMS capability
12/24v
Weight: 3800 g
Dimensions: 180 x 125 x 55 mm
operation
Specifications:
Operating Temperature: -40 to +75 degrees C
Dimensions: 180 x 125 x 55mm (excluding antennas)
Weight: 3,8 kg
Protection: IPX4
Technology: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s
5G/LTE: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s
3G/4G Fallback (Support bands): 5G (NSA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77; 5G (SA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78; 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32; 4G (LTE-TDD): B38, B40, B41, B42, B43
4G & 5G Antennas: Dual Wi-Fi band independent 2.4 & 5 GHz (maximum 150 connections); dual 48cm external wideband high gain MIMO supplied with 7-meter cables and mounting bases. (10 & 20m options available) PLUS additional 100mm dome antenna for 4 x 4 MIMO operation and optimized for 5G (7m cable only)
Interfaces: 4 x LAN 10/100 Ethernet Port; 1 x WAN 10/100 Ethernet Port ; WiFi; 802.11 b/g/n/ac
What’s in the Box?
1 x 5G Xtream Modem Unit
1 x DC Power/IO cable
2 x External antennas
2 x E179F antenna bases
2 x 7m LMR200 antenna cables (N male to N male)
1 x 5G dual element dome antenna with pole/1” adaptor mount and integrated 7m cables
2 x Internal wifi antennas
1 x Internal GPS antenna
Options (sold separately):
1” antenna adaptors and range of mounts
10 & 20m LMR400 antenna cable packs for 4G antennas
AC 110/220v power adaptor
4GXWL hi power external wifi option
LANLink NMEA 0183/2000 interface
|
2065.50 |
|
|
NMEA 2000 T-Connector - 1-Way Extension Block
As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use one of these single T-pieces to add devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. The lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed.
*Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit).
Features:
NMEA 2000 Single T-Piece
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors improve reliability
Waterproof rating of IP68
|
26.83 |
|
|
NMEA 2000 T-Connector - 6 Ports
As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use this 4-way T-piece to add another four additional devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. Also, The 4x lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed.
*Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit).
Features:
NMEA 2000 4 x T-pieces
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors improve reliability
Waterproof rating of IP68
|
78.07 |
|
|
AISnet AIS Base Station
AISnet is a new AIS receiver for use as an AIS base station at home or in the office. Utilising the same high performance dual channel AIS receiver as the rest of the Digital Yacht range, AISnet also features an ethernet socket so that you can connect it to your broadband router and send AIS data to an on-line AIS tracking service.
There are now a large number of internet based web sites which offer a view of AIS equipped vessels on a background chart allowing users to check the position and identity of ships and yachts. If your home/office is close to the coast and you would like to contribute your data to one of these sites, simply register with the company and they will give you an IP address and Port number.
Using the setup program that Digital Yacht supply, it takes seconds to program the IP address and Port in to AISnet, which will immediately start sending your local AIS data seamlessly across the internet to be displayed on the site.
It is also possible to view the data, that AISnet is collecting, locally on your PC using the free SmarterTrack Lite software that Digital Yacht include with every AISnet. Simply plug the USB connector into your PC and the AIS data will appear on your PC and still be transmitted over the internet.
AISnet is supplied with a universal UK/Euro/US mains adaptor that provides a regulated 12v supply from 240v/110v AC mains.
KEY FEATURES
AIS base station for Home of Office use
Integrated ethernet network controller for supplying AIS data to online AIS websites
High performance dual channel AIS receiver
Simple configuration via free setup program
USB Interface for simple Plug and Play connection to a PC
Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter
Universal Mains power supply included
Simple "fit and forget" black box solution
|
797.95 |
|
|
DIGITAL YACHT - NEW PRODUCT ALERT!
Digital Yacht has introduced the GPS160, high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.
TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure and more.
NEW! Galileo GNSS
The GPS160 supports GPS, Glonass and Galileo positioning. TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.
MOB Features:
-GPS160 accepts an external switch inpu to activate internal MOB function
-Position is automatically saved and GPS160 calculates and outpus a "synthetic" AIS MOB NMEA sentence allowing compatible plotters to mark the MOB position automatically - just as if an AIS SART had been activated
-Easily installed with a simple push button switch or for connection to outboard kill switch and tether
-Can also function with 3rd party wireless MOB systems with any switched alarm output
Digital Yacht is all about next generation navigation, communication and entertainment systems for your boat. Boating should be fun, safe and easy and Digital Yacht products integrate into existing and new boat networks to bring a powerful dimension to your onboard electronics.
Specials Closeouts Remanufactured Rebates
|
|
|
NMEA 2000 Transducer Smart Sensor DTS810
This combination transducer gives you accurate information about depth, speed and water temperature. The transducer is supplied with a thru-hull / ground sleeve for installation in the bottom of the vessel. The transducer can be easily pulled out for cleaning and maintenance. The data from the Triducer can be displayed on any radar, chart plotter, or device that accepts NMEA 0183 or NMEA 2000® data. The Airmar type DST810 breakthrough sensor fits into the Airmar type P617V breakthrough sleeve (included with the DST810). Because the widely used airmar thru-hull transducer type DST800 is also supplied with the thru-hull type P617V, an exchange / upgrade of existing transducers of the type DST800 with the type DST810 is possible without much effort. Popular depth sensor for shallow water performance.
|
419.95 |
|