|
Marine Grade Fuse Holder 4 GA
DS18 has new fuse holders that you can be sure to use in almost all weather conditions, the MFH4. This weatherproof fuse holder is completely sealed from the elements.
Features:
Water tight construction to prevent short circuits and corrosion.
Included allen keys, ferrules, and allen bolts to help maintain the tightest connection.
Comes with an assortment of fuses so you can pick the correct fuse based on your amp power requirements.
Made of high strength plastic to give unparalleled long lasting durability.
Specifications:
1pc X Fuse Holder Includes Red Silicone Sheath (Size : OD6.5MM)
3pcs X AFS Fuse (80A x 1, 100A x 1, 150A x 1)
3pcs x Allen Key(Nickel Plating, 2mm x 1,3mm x 1, 4mm x 1)
Bass Accessories, Silver plating
Tubular terminal x 8:8 AWG x 4, 10 AWG x 4
∗Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.34 |
|
|
Marine Grade Fuse Holder 8 GA
DS18 has new fuse holders that you can be sure to use in almost all weather conditions, the MFH8. This weatherproof fuse holder is completely sealed from the elements.
Features:
Water tight construction to prevent short circuits and corrosion.
Included allen keys, ferrules, and allen bolts to help maintain the tightest connection.
Comes with an assortment of fuses so you can pick the correct fuse based on your amp power requirements.
Made of high strength plastic to give unparalleled long lasting durability.
Specifications:
1pc X Fuse Holder Includes Red Silicone Sheath (Size : OD6.5MM)
4pcs X ATC Fuse (30A x 2, 40A x 2)
2pcs x Allen Key(Nickel Plating, 2mm x 1,3mm x 1)
Bass Accsessories, Silver plating
Tubular termian x 8:8 AWG x 4, 10 AWG x 4
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.34 |
|
|
VMANL Mini-ANL Fuse Holder - 4 to 8 AWG
T-SPEC'S VMANL fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time. Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.
The T-SPEC VMANL fuse holder accepts 4 to 8 gauge power cables and mini-ANL fuses.
Features:
Compact fuse holder with 360° rotating base
Accepts mini-ANL fuses
Connects to 4- to 8-gauge power cable
Solid brass construction
Black nickel finish
Water resistant
T20 Torx® screws
Gate Lock technology
In the Box:
One (1) mini-ANL fuse holder
Two (2) Threaded end-caps
4 and 8 gauge rubber grommets (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.64 |
|
|
VAGU AGU Fuse Holder 4 to 8 AWG
Fusing an aftermarket stereo system provides protection for your car and your car stereo. No fuse system provides better protection than T-Spec. The new T-Spec compact brass designs are constructed from solid brass and are smaller than anything else in the industry. This combination of top quality materials and thoughtful design provides an incredibly reliable and simple to install product that will last for years.
Features:
Compact fuse holder with 360° rotating base
Accepts an AGU fuse (not included)
Connects to 4 to 8 gauge power wire
Black nickel-plated brass construction
Anodized finish resists rust
Impact-resistant polycarbonate cover
Fastening screws can be used with a variety of tools
T20 Torx® screws
Gate Lock technology
In the Box:
AGU fuse holder
Plastic cover
2 Rubber grommets (pre-installed)
Installation sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.64 |
|
|
MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution.
Features:
Carded blister packaging for simple retail display
Compatible with MIDI bolt-down fuses up to 200A (sold separately)
The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block
Slots molded into the base enable secure tie-wrap mounting
Zinc-plated steel M5 studs and hex nuts
Bolt-down fuse holder base features M4 mounting holes
UL 94 V-0 flammability rating
Applications:
Battery and alternator Connections
*Fuses not included
|
8.16 |
|
|
Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.
L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.
The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market. “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting. According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.
For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place.
Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price.
For more information, please visit www.thewirie.com.
About The Wirie:
Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie. The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution. Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com
About L-com:
Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com
Contact:
Liesbet Collaert
liesbet@thewirie.com
http://www.thewirie.com
The Wirie can now be found at CLR Marine.
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband
http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie
|
|
|
HYDRO 6 Channel Full-Range Class D Waterproof Marine Amplifier - 3000W
DS18 designed the NXL-X900.6D for customers looking for a compact and waterproof amplifier with exceptional power output and prioritizing boosting sound.
The NXL series' impressive power output is supplemented by its outstanding efficiency, and its durability in harsh conditions makes it a favorite among customers in need of a waterproof amplifier to be the powerhouse of their system.
The NXL-X900.6D comes in a 6-channel configuration making it great for powering more complicated active setups. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL units have stable and reliable 4-layer PCB layouts, IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is perfect for outdoor enthusiasts looking for a durable, waterproof amplifier with intense power for their marine vehicle's audio system. This series is best used in various rugged and wet environments, such as on trails or at the lake.
Features:
Included a marine grade fuse and fuse holder that is connected inline with your main power wire will help with ultimate protection against the elements.
IP67 Waterproof Rating
UV, Salt, and Fog Protection
Direct Power Harness Design with Marine Grade OFC Tinned Wires
Latest Digital Amplifier Design With SMC Technology
Technical Specifications:
Number of Channels - 6
Frequency Response - 10Hz-20KHz
4 Ohm RMS Power - 6 x 150W
2 Ohm RMS Power - 6 x 250W
Signal-to-Noise Ratio - > 84dB
Product Dimensions: (L x W x H) - 14" x 4.4" x 1.77" (360mm x 112mm x 45mm)
*Sold as an Individual
|
839.94 |
|
|
HYDRO 4 Channel Full-Range Class D Waterproof Marine Amplifier - 2400W
DS18 designed the NXL-X850.4D for customers looking for a compact and waterproof amplifier with exceptional power output and prioritizing boosting sound.
The NXL series' impressive power output is supplemented by its outstanding efficiency, and its durability in harsh conditions makes it a favorite among customers in need of a waterproof amplifier to be the powerhouse of their system.
The NXL-X850.4D comes in a 4-channel configuration making it great for powering more complicated active setups. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL units have stable and reliable 4-layer PCB layouts, IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is perfect for outdoor enthusiasts looking for a durable, waterproof amplifier with intense power for their marine vehicle's audio system. This series is best used in various rugged and wet environments, such as on trails or at the lake.
Features:
Included a marine grade fuse and fuse holder that is connected inline with your main power wire will help with ultimate protection against the elements.
IP67 Waterproof Rating
UV, Salt, and Fog Protection
Direct Power Harness Design with Marine Grade OFC Tinned Wires
Latest Digital Amplifier Design With SMC Technology
Technical Specifications:
Number of Channels - 4
Frequency Response - 10Hz-20KHz
4 Ohm RMS Power - 4 x 200W
2 Ohm RMS Power - 4 x 300W
Signal-to-Noise Ratio - > 83dB
Product Dimensions: (L x W x H) - 11.8" x 4.4" x 1.77" (301mm x 112mm x 45mm)
*Sold as an Individual
|
659.94 |
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
MEGA Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 500 Amps
The MEGA Flex Series 32V Bolt-Down Fuse Holder makes it simple to install high-amp fusing thanks to its flexible cover. The UL 94 V-0 rated cover features 6 different positions for cable entry, plus its flexibility accommodates large wire sizes and ring terminal stack up. Designed for MEGA fuses up to 500 amps, this bolt-down fuse holder also has a dovetail feature on the sides that allows you to connect multiple MEGA Flex Series fuse holders to create a fused high-power distribution block. This fuse holder (02981028-BP) includes stainless steel M8 studs, hex nuts, and split washers.
Features:
Blister packaging promotes the easy retail display
Compatible with MEGA high-current bolt-down fuses up to 500 amps
Black or red flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetailing feature lets you connect multiple MEGA Flex Series fuse holders together to create a fused high-power distribution block (busbars for multi-fuse applications are sold separately)
Slots molded into the base enable secure tie-wrap mounting
Bolt-down fuse holder base features an M6 mounting hole and an M6 slot measuring 6mm long
Includes stainless steel M8 studs, hex nuts, and split washers
The flexible cover has a UL 94 V-0 flammability rating
Applications:
Battery and Alternator Connections
High-Current Circuit Protection
Electric Construction Equipment
*Fuses not included
|
12.43 |
|
|
HYDRO 2 Channel Full-Range Class D Waterproof Marine Amplifier - 1000W
DS18 designed the NXL-X360.2D for customers looking for a compact and waterproof amplifier with exceptional power output and prioritizing boosting sound.
The NXL series' impressive power output is supplemented by its outstanding efficiency, and its durability in harsh conditions makes it a favorite among customers in need of a waterproof amplifier to be the powerhouse of their system.
The NXL-X360.2D comes in a 2-channel configuration making it great for powering one set of speakers or bridging the power to supercharge a subwoofer. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL units have stable and reliable 4-layer PCB layouts, IP67 waterproof rating for power sports, ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is perfect for outdoor enthusiasts looking for a durable, waterproof amplifier with intense power for their marine vehicle's audio system. This series is best used in various rugged and wet environments, such as on trails or at the lake.
Features:
Included a marine grade fuse and fuse holder that is connected inline with your main power wire will help with ultimate protection against the elements.
IP67 Waterproof Rating
UV, Salt, and Fog Protection
Direct Power Harness Design with Marine Grade OFC Tinned Wires
Latest Digital Amplifier Design With SMC Technology
Maximum output of 500W bridged at 4-Ohms, 180W x 2CH at 4-Ohms, and 250W x 2CH at 2-Ohms
Technical Specifications:
Number of Channels - 2
Frequency Response - 10Hz-20KHz
4 Ohm RMS Power - 2 x 180W
2 Ohm RMS Power - 2 x 250W
Signal-to-Noise Ratio - > 82dB
Product Dimensions: (L x W x H) - 8.3" x 4.4" x 1.77" (211mm x 112mm x 45mm)
*Sold as an Individual
|
479.94 |
|
|
MIDI 498 Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to interlocking pins on its sides, the MIDI 498 Series 32V Bolt-Down High-Current Fuse Holder can be used as a single automotive fuse holder or combined with additional fuse holders to create a multi-fuse block. Compatible with MIDI bolt-down fuses (sold separately) up to 200 amps, the high-amp fuse holder comes with a protective thermoplastic cover that can be tethered to the base. This model of the MIDI 498 Series fuse holder (04980903-BP) includes a base with mounting tabs and M6 holes and a protective cover with cable openings at the ends. Split washers and hex nuts are included to install a fuse on the M5 threaded studs simply.
Features:
Blister packaging promotes the easy retail display
Base style 2 with mounting brackets and M6 holes is designed for outboard mounting
M5 threaded studs, split washers, and hex nuts for simple fuse installation
Protective cover openings at the ends accommodate heavy-duty cables
Applications:
High-Current Circuit Protection
*Fuses not included
|
6.65 |
|
|
Class T Fuse Holder with 2 Additional Studs 225-400A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
Class-T: 225-400 Amp
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.47 |
|
|
HYDRO 4-Channel Full Range Digital Marine Amplifier
The NVY series was manufactured to put power back into your hands whether you’re out on the great blue or maneuvering on the dirt path less traveled.
Our latest amplifier added to this series has an IPX waterproof rating of IPX7, giving this fortified beast of a machine the ability to be submerged in water as deep as 1 meter for up to 30 minutes. It also has a 2 CH/4 CH input selector giving you complete control over how much power gets designated to each speaker.
Place this amplifier anywhere using our Direct Power harness design manufactured to give you creative control over where you get the wave-making tunes on your marine vehicle.
Features:
The included marine-grade fuse and fuse holder connected to your primary power wire will help with ultimate protection against the elements.
Latest Digital amplifier design with SMC technology
Submergible IPX7 Waterproof Rating
UV, Salt, and Fog protection
2 CH/4 CH Input Selector
Maximum output of 350W x 2 CH bridged at 4-Ohms, 200W x 4 CH at 2-Ohms, and 120W x 4 CH at 4-Ohms
Technical Specifications:
Total Watts (Peak) - 1440 Watts
RMS Power @ 4 ohm - 4 x 120 Watts
RMS Power @ 2 ohm - 4 x 200 Watts
RMS Power @ 4 ohm Bridge - 2 x 350 Watts
Frequency Response - 20Hz - 20KHz
Signal to Noise Ratio 1W@4Ω - >90 dB
Measurements - 10" (L) x 4.5" (W) x 1.9" (H)
Heatsink Length - 8.5"
*Sold as an Individual
|
599.94 |
|
|
Marine Tinned OFC 18GA RGB Wire with 16GA Speaker Wire - 100' Spool
DS18 likes it loud and a lot of our loudspeakers and marine speakers come with RGB connectivity. No more will you need to make your own RGB harness to string your speaker wires and RGB wires together. Now DS18 offers an all-in-one speaker and RGB wire grouping sheathed in a protective cover so you can more easily wire all your RGB and speakers together for an easy and great-looking install.
Features:
RGB wiring grouped with positive and negative speaker wire with a marine-grade protective sheath.
Color-coded for easy recognition and installation.
Protective cover and tinned wiring to make installs look fantastic and keep away corrosion and other bad elements.
OFC wire offers the highest current and conductivity all while being corrosion-resistant.
16 gauge positive and negative speaker wiring paired with 18 gauge RGB wiring for easy installs.
Technical Specifications:
Length - 100'
Conductor Material - Tinned OFC
Thread Size - 0.12mm
Nominal Outside Diameter - 9.2mm
Gauge - 16 GA Speaker Wire/18 GA RGB Wire
Shield Type / Material / Color - UV Protected / Ultra Flex / White
*Sold as an Individual
|
176.34 |
|