MU Series Horizontal Clean Agent Fire Extinguisher - 225 Cubic Feet As an enhancement to Fireboy's product line, the company has added this manual/automatic extinguisher designed specifically for horizontal mounting. This unit uses the FK-5-1-12 clean extinguishing agent and is designed for maximum firefighting efficiency when mounted in the horizontal position. Why Fireboy-Xintex is Needed: Continuous protection Automatic operation Manual operation with pull cable Peace of mind Often detects and suppresses a fire before it is known International system approvals (FM, USCG, CE, RINA, BV) FK-5-1-12 Clean Extinguishing Agent approved for marine use worldwide (EPA SNAP and European) Approved for Class B fires in engine rooms, machinery spaces, and similar industrial applications Applications:  Fire protection fluid with very low global warming potential (GWP <1) Low toxicity in a properly designed system (no harm to personnel) No damage to sensitive equipment Not targeted for emission reduction or phase-out Coverage from 25-485 ft3 (0.7-13.7 m3) for engine rooms, machinery spaces, and other enclosed spaces for Class B fires Factory Mutual and USCG Approved Don't Just Manage a Fire. Extinguish it. FK-5-1-12 clean extinguishing agent is a highly effective clean fire suppressant designed to extinguish a fire in its incipient stage before it has a chance to spread. The FK-5-1-12 clean extinguishing agent evaporates more than 50 times faster than water. Transitions from a liquid to a gaseous state very rapidly when discharged through a nozzle and readily achieves vapor-extinguishing concentrations in the air. Low toxicity (no harm to personnel) Extinguishes fires in less than half the time of CO2 and other inert gases No damage to sensitive equipment Not targeted for emission reduction or phase-out Ready to Install Each Fireboy system includes a heavy-duty powder-coated steel shelf bracket system, helm display, and owner’s manual. Specifications: Volume Protected: 225 ft.^3 (6.4 m^3) Diameter: 6.3 in. (160 mm) Agent Weight: 12.7 lbs. (5.8 kgs) Shipping Weight: 17.2 lbs. (8 kgs) System Pressure: 360 psi @70 degrees F

MA Series Fire Extinguishing System - 450 Cubic Feet Fireboy-Xintex clean agent fire extinguisher systems are designed to automatically discharge whenever the protected space's ambient temperature reaches 175 degrees Fahrenheit. When the Fireboy System discharges, the extinguisher is designed to fully empty the HFC-227ea (Heptafluoropropane) and 3M Novec Clean Agent in less than 10 seconds.  No clean-up is required.  There is no powdery residue or water left behind.  The fire is extinguished by a combination of heat reduction and chemical reactions. *Diesel-powered craft require installation of an Engine Shutdown System  Features: Protects engine rooms and machinery spaces  Pre-engineered, total flooding system The safest way to combat an engine room fire Automatic discharge at 175°F (79°C) with optional manual release Utilizes HFC-227ea and 3M Novec clean agents – an effective Halon replacement No water or powdery residue Includes locking lever for increased safety when removing or installing cable Certifications: U.S.C.G. EN ISO 9094-1 and 9094-2 standards  ISO RINA MCA Certified Factory Mutual  Technical Specifications: Volume Protected - 450 ft3 Dimensions (Dia. x H) - 7.1" x 19.4" (18 x 49.3 cm) Agent - HFC-227ea and 3M Novec Agent Weight - 19.4 lbs (8.8 kg) System Pressure (@70°F) - 240 psi In the Box: Fire extinguisher Mounting bracket Helm station panel - 90107 Owners manual  *Sold as an Individual 

Automatic Vertical Fire Extinguisher with Heavy Duty Bracket - 225 Cubic Feet Volume Protected This fire extinguisher provides clean agent fire suppression and is meant to be mounted vertically with the heavy-duty bracket. Features: Discharge is automatic at 175 degrees F (79 degrees C) for round-the-clock engine compartment fire protection Total flooding of the engine compartment in less than 10 seconds for fast smothering of the fire FK-5-1-12 clean extinguishing agent leaves no harmful residue to clean up Easy to read color coded pressure gauge on the cylinder also identifies the “charged/discharged” status Coverage from 25 ft3 to 1,800 ft3 in a broad array of increments provides maximum coverage at the lowest cost Integrated shelf bracket mounting system Up to 4,000 ft3 available with GA FK-5-1-12 Systems Rugged industrial-designed pressure gauge ensures trouble-free performance International system approvals (FM, USCG, CE, RINA, BV) FK-5-1-12 clean extinguishing agent is approved for marine use worldwide (EPA SNAP, European) Approved for Class B fires in engine compartments, machinery spaces, and similar industrial applications Many marine insurance providers offer a discount to boaters who install a fixed fire extinguisher system (contact your insurer for details) CG Series: Automatic discharge only (@ 175 degrees F / 79 degrees C) Engine compartments up to 1,000 ft3 (28.3 m3) Heavy-duty mounting bracket Helm display Specifications: Volume Protected: 225ft3 / 6.4 m3 Diameter: 6.3 in. / 160mm Total Height: 18.7 in. / 476mm Agent Weight: 12.1 lbs. / 5.5 kgs Shipping Weight: 32 lbs. / 14.3 kgs System Pressure: 360 psi @70 degrees F

Automatic Vertical Fire Extinguisher with Heavy Duty Bracket - 175 Cubic Feet Volume Protected This fire extinguisher provides clean agent fire suppression and is meant to be mounted vertically with the heavy-duty bracket. Features: Discharge is automatic at 175 degrees F (79 degrees C) for round-the-clock engine compartment fire protection Total flooding of the engine compartment in less than 10 seconds for fast smothering of the fire FK-5-1-12 clean extinguishing agent leaves no harmful residue to clean up Easy to read color coded pressure gauge on the cylinder also identifies the “charged/discharged” status Coverage from 25 ft3 to 1,800 ft3 in a broad array of increments provides maximum coverage at the lowest cost Integrated shelf bracket mounting system Up to 4,000 ft3 available with GA FK-5-1-12 Systems Rugged industrial-designed pressure gauge ensures trouble-free performance International system approvals (FM, USCG, CE, RINA, BV) FK-5-1-12 clean extinguishing agent is approved for marine use worldwide (EPA SNAP, European) Approved for Class B fires in engine compartments, machinery spaces, and similar industrial applications Many marine insurance providers offer a discount to boaters who install a fixed fire extinguisher system (contact your insurer for details) CG Series: Automatic discharge only (@ 175 degrees F / 79 degrees C) Engine compartments up to 1,000 ft3 (28.3 m3) Heavy-duty mounting bracket Helm display Specifications: Volume Protected: 175ft3 / 4.9 m3 Diameter: 6.3 in. / 160mm Total Height: 18.7 in. / 476mm Agent Weight: 9.4 lbs. / 4.3 kgs Shipping Weight: 26 lbs. / 11.9 kgs System Pressure: 360 psi @70 degrees F

The US Coast Guard issued a safety alert advising of a potential problem involving certain ANSUL – High Pressure Carbon Dioxide Fire Extinguishing Systems. There have been several instances where this system has discharged without human intervention. The manufacturer has identified the suspect CO2 cylinder valves as those having a date code between 10-07 and 06- 08. Owners, operators, and masters of ships having such ANSUL systems should immediately check the dates on the CO2 cylinder valves and notify ANSUL if the date code is within the suspect range. Safety Alert 05-09

System Ready Panel Warning Light  The green warning L.E.D. provides constant monitoring of the fire suppression system when the ignition switch is On.  Complies with U.S. Coast Guard requirements for system approval. This 2" round indicator light has an adhesive back aluminum plate for easy panel mounting and requires a 5/16" hole for wire routing. Standard with all pre-engineered fire extinguishing systems. Compatible With: MA2, CG2 and GA suppression systems  *Sold as an Individual 

Gasoline & Propane Sensor Only This sensor is a replacement for Fireboy-Xintex P systems.  Installation: The sensor should be located by the propane-powered appliance, near the floor Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage Harsh chemicals should not be used to clean sensors Use the appropriate #8 mounting hardware to mount the Propane Fume Sensor in the desired location The rubber gasket should be installed between the sensor and the mounting surface Connect to the extension cable using the attached quick-disconnect connectors (Sold Separately)

Fireboy - Xintex Fireboy-Xintex manufactures top-of-the-line safety devices to keep your boating experience safe. Our equipment detects fires and fatal fumes to protect your marine craft and your life. Fireboy is the world's leading manufacturer of engine compartment fire extinguishing systems.

The US Coast Guard has issued a warning on Counterfeit Portable Fire Extinguishers.     Please click on the Linked PDF for more information.  Counterfeit Portable Fire Extinguishers

CO Alarm 12/24V DC - Black A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual 

CO Alarm Internal Battery - Black A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual 

CO Alarm 12/24V DC - White A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual 

CO Alarm Internal Battery - White A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - No *Sold as an Individual 

CO Alarm 12/24V DC with Interconnect - Black   A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries Technical Specifications: Power Usage - 4 mA Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual 

CO Alarm Internal Battery w/Interconnect - Black A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces. The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.  The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response. *Long sensor life – approximately 7 year end-of-life (EOL) Features: Interconnect up to ten (10) CO alarms - all connected CO alarms sound together  Microprocessor controlled Compact design for inconspicuous protection Time-weighted average CO measurement process constantly monitors all CO levels Highly resistant to most chemicals, solvents & cleaners CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.   Technical Specifications: Power Usage - None Alarm Point - 10% COHb Alarm Horn - 85 dBA Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm) Interconnect Functionality - Yes *Sold as an Individual