MCU006 Vertical Remote Control  Total Control with ease and comfort.  Furuno's MCU006 Series of Remote Controller for NavNet TZtouch3, TZtouchXL, and TZT2BB Multi-Function Displays feature a comfortable rotary knob and beveled keys for enhanced ease of use. The large knob can be utilized as the RotoKey and for zooming in/out on both TZtouch3 and TZtouchXL. The remote also has 10 dedicated buttons that operate different functions. A single MCU006 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU006 Remote Control is a perfect companion for any helm or bridge. Whether you want to mount the controller in the arm of the captain's chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU006 is an ideal solution.

MCU002 Remote Control Unit The MCU002 is a compact, waterproof remote control unit for use with the TZT9/14/BB. It offers the expandability of multi touch operation of the TZT9/14/BB to the hardware key operation, as the best supplemental tool to multi touch operation. With the MCU002, basic control of the NavNet TZtouch series is always within arms reach. The MCU002 consists of a simple joystick and 10 dedicated, logical hardware keys, offering control of nearly every aspect of the TZtouch system. The joystick can move in eight directions to move a cursor or scroll the screen. It also has a "push" functionality - for example, if you push the joystick on the Plotter screen, a contextual menu will appear. The MCU002 also offers control of the NavPilot 700 Autopilot when that system is integrated with NavNet TZtouch. Features: Complete control of all TZtouch features and functions Compactly sized for flexible installation (2.3"w x 4.5"h w/a modest .75" mounting depth) Combination of clickable joystick controller and tactile response buttons for simplified operation Auto-Scroll feature enables instant panning/scrolling by placing cursor at edge of screen USB 2.0 device w/2m cable, extendable w/optional USB 2.0 extension cable (tested up to 30m) Use w/Multi-touch controls & NavNet apps TZtouch v3.12 or later software required to support MCU002 functionality WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RF Remote Control f/Explorer NavPro GPS Radio Frequency Remote Control for Explorer NavPro GPS Operate unit from multiple locations

MCU004 Remote Control for NavNet TZtouch & TZtouch2 Furuno's NavNet TZtouch and TZtouch2 Multi Function Displays have become widely utilized on a variety of helms and bridges. To enhance the various installations, Furuno has developed the MCU004, a versatile remote control unit that can be used with TZtouch and TZtouch2 units. The MCU004 Remote Control features a large rotary knob and joystick, which can be utilized as the RotoKey on NavNet TZtouch and for zooming in/out on both TZtouch and TZtouch2. In addition, the joystick allows you to pan around the chart and move the cursor on the screen. The remote also has dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel. For those captains that have multiple TZtouch or TZtouch2 displays on their helm or bridge, a single MCU004 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU004 Remote Control is a perfect companion for any helm or bridge. Whether you are using the TZtouch Black Box and want to mount the MCU004 in the arm of the captain_s chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU004 is an ideal solution. Features: Rotary knob as well as a joystick to take the place of the RotoKey Allows users to zoom in and out Joystick functions like a mouse allowing users to move the cursor on the MFD screen Buttons for Edge Swiping, Home, MOB and more Single MCU004 can control multiple TZtouch and TZtouch2 displays Allows for toggling back and forth from one display to another WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

OP50 Wired Remote Control - Portrait Mount Perfectly designed for mounting in a helm chair arm, between monitors, or in other locations suiting a portrait orientation, the Simrad OP50 Remote Controller provides intuitive keypad and rotary-dial command of up to six NSS evo2 or NSO evo2 multifunction displays. Features: Control up to six NSS evo2 or NSO evo2 multifunction displays High-quality aluminium control dial with built-in cursor functions Portrait orientation (landscape version also available) Narrow design perfect for helm chair arm mounting Dash mount with low 8mm profile Zero-profile flush mount with optional bracket Integrated high-decibel speaker for critical alarms Quickly switch displays with dedicated button and LED indicators Single NMEA 2000® connection Manage Multiple Displays Networked with a single NMEA 2000® connection for both power and control, one OP50 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicator lights clearly show the selected display number, while a dedicated button cycles quickly through the available displays. Controls Optimized for NSS evo2 and NSO evo2 The OP50 Remote Controller features a keypad specifically designed to operate the latest NSS evo2 and NSO evo2 multifunction displays efficiently and reliably in all conditions. The controller's high-quality aluminium dial features a knurled edge for precise rotary control, and built-in cursor functions for easy on-screen navigation. Easy Mounting in Vertical or Portrait Orientation The portrait OP50 is perfectly suited to mounting in the arm of a helm chair, with its narrow design and cable positioned specially to fit such installations. This orientation is also ideal for use in narrow consoles and beside Simrad MO-series touchscreen or pilothouse monitors. Dash mounting provides a slim 8mm profile, while an optional bracket allows total flush-mount installation. Specifications: NMEA 2000 Certified: Yes Operating Temperature: -15°C to +55°C/5°F to 131°F Waterproof Standard/Rating: IPX6 (from front when dash mounted with gasket) IPX2 (from back) Product Width: 60mm/2.36" Product Depth: 44.5mm/1.75" Product Height: 150mm/5.9" Product Weight: 0.3kg/0.66lb Power Consumption: <100mA@13.5V NMEA 2000 Load Equivalency Number: 2 network loads (100mA)

RMK-10 System Remote Control Portrait Keypad Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location. The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control. RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displays The RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere. Utilising Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays. When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between. Mounting Options The RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you. For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system. RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom. Specifications: PoE classClass 1 Nominal supply voltage12 / 24 V dc Operating voltage range10.8V dc to 31.2V dc Power consumption3.84W Environmental: Operating temperature-25ºC to +55ºC (-13ºF to 131ºF) Storage temperature-30ºC to +70ºC (-22ºF to 158ºF) Relative humidityMaximum 75% Waterproof ratingIPX6 Wired Connections: Network / power1 x RayNet connector | (gS Series - 1000 Mb/s plus PoE) | (aSeries , cSeries, eSeries - 100 Mb/s) Alternate power1 x power connector

RMK-10 System Remote Control - Portrait & Landscape Keypad Raymarine's RMK-10 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location.  The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control. RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displays The RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere. RMK-10 Mounting Options The RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you. For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system. RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom. Networking & Control Utilizing Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays. When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.

V-CAN Wireless Remote Controller for V-CAN Thrusters & BOW PRO This system gives boaters full control of their electrically driven equipment on board. It includes a base unit, one remote control, and two connection cables. The VETUS wireless control handheld remote has a range of 10 to 25 m, depending on the location of the receiver, and delivers easy control of V-CAN Thrusters and BOW PRO models. The wireless remote control meets the EMC requirements. Features: For V-CAN Thrusters and BOW PRO models Connectors for two thrusters (4 channels) Open-air range is up to 10m Maximum range is up to 25m when unimpeded Specifications: Remote Control  Power supply 3 VDC CR2032 (1x)  Protection Class: IP66  Frequency: 433.92 Hz  Temperature Range: 0°C - 70°C (+32°F - 158°F)  Weight: 50 g (2 oz) Receiver  Power Supply: 8 VDC to 30 VDC  Maximum Current (per output): 8 A (at 30 Volts DC)  Protection Class: IP40  Frequency: 433.92 Hz  Temperature Range: 0°C - 70°C (+32°F - 158°F)  Weight: 800 g (28 oz) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Battery Status and Freedom Inverter/Charger Remote Control Provides Valuable Inverter/Charger System Monitoring and Control The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel. Note: Not for Freedom HF or Freedom SW Series. Product Features Independent invert and charge on/off controls Push button control of power sharing, equalizing, battery set-up Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage LED warning indictors for low battery and overload warning Splash resistant design Incoming AC breaker selection allows programmable power sharing Easy to install 25' Cable One year warranty Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04 WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

S100 Wireless SeaTalk autopilot remote control S100 Wireless Autopilot Remote Compact and lightweight, the S100 remote delivers the freedom of wireless control to any Raymarine SeaTalk autopilot. The bright display is easy to read with two lines of text and a graphical autopilot mode indicator. The 5 button ergonomic keypad and intuitive menu structure provides simple operation and easy access to extended features. Rugged and waterproof the S100 fits in your pocket or clips to your belt, keeping full function autopilot control always within reach. S100 Features Two line display with a graphical autopilot status indicator Crisp, high contrast 24 x 127 dot matrix display Backlit display Raised profile on Standby button for easy identification in the dark Keylock security Convenient, replaceable AAA alkaline batteries No longer comes with Belt clip Wireless Features: Up to 32 feet (10 meters) wireless operating range from the base station Signal strength indicator Pre-registered each unit leaves the factory already registered to the base station S100 comes with Instruction Manual, S100 Controller, Base Station, Cradle, Lanyard The S100 wireless autopilot controller is compatible with the following Raymarine/Autohelm SeaTalk Autopilots: ST1000 ST2000 ST3000 ST4000 ST5000 SmartPilot ST6001 SmartPilot ST7001 SmartPilot ST8001 SmartPilot S1000

MS-RGBRC RGB Lighting Control Module with Wireless Remote Control Enhance your on-board audio entertainment experience with not only brilliant audio, but LED illumination options to match! The MS-RGBRC wireless remote lets you take control of your on-water experience to adjust the lighting of your Fusion RGB speakers. This portable wireless remote will function up to 10m from the speaker lighting control module, giving you the freedom to adjust the illumination from anywhere on your boat. Both static and dynamic color options are available, with the color easily selectable on the intuitive color select wheel.  Wireless Control of Your LED Illumination Enjoy full control of the illumination of your Fusion RGB speakers with the MS-RGBRC wireless remote control. The remote is portable and will function up to 10m from the speaker lighting control module. Static and Dynamic Color Options A range of colors are available in both static and dynamic modes with the RGB speakers to complement your music and enhance your on-board audio entertainment experience. Simply select any color on the remote’s color wheel or change modes to cycle automatically through predefined lighting patterns. Intuitive Touch Controls Adjusting the lighting of your Fusion RGB speakers is made easy with touch controls including an intuitive color-select wheel.  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LR-1 Rremote Controller Control your HDS LIVE display from anywhere on your boat with the Lowrance LR-1 Remote Controller. Mark waypoints and zoom in/zoom out using preprogrammed keys and access up to five user-programmable favorites without ever touching your HDS LIVE display. The LR-1 connects to HDS LIVE via Bluetooth_ and features simple, short- and long-press programming functionality, making it easy to save your favorite functions to the remote. Features: Control HDS LIVE from anywhere on your boat Five user-programmable options Easy-to-use long- and short-press programming functionality Preprogrammed zoom in/zoom out and waypoint keys Bluetooth connectivity

Mechanical Remote Control for side Mounting VETUS single lever remote control for side mounting, with stainless steel (AISI 316) handle, black plastic housing and red knob. With neutral safety switch. The SICO single lever remote control features throttle advance in neutral facility, plus pre-installed 'start in gear' protection micro switch for sports boats. The handle friction is adjustable. The push-pull cables may be installed both horizontally and vertically. DIMENSIONS (LENGTH X WIDTH X HEIGHT) 5-25/32" x 5" x 3" x 7-7/8" (handle length) MECHANISM DEPTH (INCHES)    9-19/32" This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Universal Remote Control Kit for RCL-100 LED Control an ACR spotlight from any place on a vessel with fingertip control and accuracy  This controller can be surface or flush mounted. Compatible With: RCL-100 LED In the Box: Master controller (URC-103) Point Pad™ (URP-102) Connectors Coaxial cable - 15' Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R 6.5" Marine Audio Package with RGB Remote & Controller - Anthracite Grill When it’s time to #GetLoud and you’re starting from scratch, the Roswell R 6.5" Marine Audio Package comes ready to rock with every piece of the puzzle. Trade trips to the store for cruises to the sandbar with this all-in-one audio solution, including Roswell's R 6.5" in boat speakers, RGB controller, R1 650.4 amp, Cybox Bluetooth Controller, Dual Zone Volume Control, and every accessory boaters need to get on the water. Features: Anthracite grill color Includes: (2 pair) R 6.5" Marine Speakers     (2) 2M 2 Channel RCA cable (1)  R1 650.4 Amplifier     (1) Dual Zone Volume Control (1)  Cybox Bluetooth Controller     (1) RGB Remote & Controller