|
P79 Plastic In-Hull Transducer, 600w (10-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Plastic In-Hull Mount for Shoot-Through Applications
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
218.18 |
|
|
Plastic Thru-Hull Transducer, 600w (10-Pin)
600 Watts
50/200 kHz
46/10 degree Beam Angles
Plastic Thru-Hull
8-Meter Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
202.67 |
|
|
Urethane In-Hull Transducer, 1kW (10-pin), Broadband
The 527ID-IHD is an in-hull transducer utilizing Broadband Technology.
M260 Transducer with In-Hull Kit
1,000 Watts Power
50/200 kHz w/Diplexer
19/6 degree Beam Angles
Plastic Transducer with In-Hull Mounting Kit
10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1066.67 |
|
|
Bronze Thru-Hull Transducer, 600w (10-Pin)
600 Watts
50/200 kHz
46/10 degree Beam Angles
Bronze Thru-Hull
8-Meter Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
352.00 |
|
|
Plastic Transom Mount Transducer, 600w (10-Pin)
600 Watts
50/200 kHz
46/10 degree Beam Angles
Plastic Transom Mount w/bracket
8-Meter Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
128.00 |
|
|
Plastic Thru-Hull, Low Profile, Transducer, 600w (10-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Low Profile Plastic Thru-hull
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
106.67 |
|
|
Bronze Thru-Hull, Low Profile, Transducer, 600w (10-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Low Profile Bronze Thru-Hull
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
224.00 |
|
|
xSonic P79 Adjustable 200/50kHz Plastic In-Hull Transducer - 9-Pin
This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.
The 9-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.
Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat.
*Fiberglass should be no more than 5/8" thick
*Not recommended for cored hulls
|
122.22 |
|
|
Airmar P79 Adjustable 200/50kHz Plastic In-hull Transducer (8-pin)
010-10327-20
This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.
The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.
Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat.
*Fiberglass should be no more than 5/8" thick. Not recommended for cored hulls.
When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
168.41 |
|
|
Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Bronze Thru-Hull with Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
245.33 |
|
|
Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Plastic Transom Mount with Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
128.00 |
|
|
520T-BLD Bronze Thru-Hull Low Profile 600W - 10-Pin
Airmar B117 Housing Style Transducer
Features:
600 Watts
50/200 kHz
45/15 degree Beam Angles
Low Profile Bronze Thru-Hull with Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
240.00 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 10-Pin Connector
High-Speed Fairing Block Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
480.00 |
|
|
Bronze Thru-Hull Multisensor w/ 7 Inch Stem, 600w (10-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with 7' Stem, Speed and Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
586.67 |
|
|
Airmar P319 200/50kHz Plastic Thru-hull Transducer (8-pin)
010-10194-21
This plastic thru-hull mount transducer performs well at high speeds.
An excellent choice for fiberglass and metal hulls, this 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Do not use on wood hulls.
When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
161.99 |
|