Heavy Duty RV Water Pump with Strainer - 12V - 4GPM - 50PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 4 GPM (15 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Heavy Duty RV Water Pump with Strainer - 24V - 4GPM - 50PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 4 GPM (15 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Heavy Duty RV Water Pump with Strainer - 12V - 3GPM - 50PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RV Water Pump with Strainer - 12V - 3GPM - 50PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RV Water Pump with Strainer - 24V - 3GPM - 50PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

AQUA KING™ II Supreme 5.0 (24VDC) Fresh Water Pump w/Strainer & Fittings SHURFLO®’s AQUA KING™ II Fresh Water Pumps are designed for boats with multi-fixtures providing “Just like home” shower pressure, and can operate at lower flow conditions without cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With heavy duty motors built to withstand the tough marine environment these motors feature an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING™ II Fresh Water Pumps can run dry without damage. Inlet strainer and ½" hose barb fittings are included. (aftermarket models only). Ignition protected. Thermally protected. 3 Year Warranty Features: Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-in Check Valve Co-Molded Diaphragm Adjustable Switch & By-Pass Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Specifications: 24 VDC 5.0 GPM [18.9 LPM] 7 Amps (Max.) 55 PSI [3.8 BAR] Intermittent Duty Multi-fixture Applications 1/2" NPS-M Inlet/Outlet

RV Water Pump - 12V - 1GPM - 35PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC 1 GPM (3.8 LPM) 35 PSI (2.4 BAR) Port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HotShot HD6 Heavy Duty Washdown Pump with 25' HoseCoil - 12V - 6 GPM - 70 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Par-Max HD3 Heavy Duty Water Pressure Pump - 12V - 3 GPM - 40 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance.  Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Par-Max HD3 Heavy Duty Water Pressure Pump - 12V - 3 GPM - 60 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance.  Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Par-Max HD4 Heavy Duty Water Pressure Pump - 12V - 4 GPM - 40 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance.  Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Par-Max HD5 Heavy Duty Water Pressure Pump - 12V - 5 GPM - 60 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance.  Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Scot Pump 48377 MOTOR & PUMP with STRAINER 3/4HP 1PH The suction Sea Strainer has a heavy, clear, removable acrylic cover to provide access to the strainer basket. The strainer basket is easy to remove. It should be checked daily for debris and sea weed that could appreciatively reduce pump capacity. A fouled suction line will cause a pump to cavitate. Cavitation can destroy a pump case and impeller in a short period of time.   Pump • Seawater Bronze case, impeller, adapter • Seawater Bronze 7/8 inch shaft • Mechanical seal is 7/8 inch diameter • Both Input and Output Ports are 1.5" • Impeller is keyed to stub shaft and secured by a washer and locking assembly. • O-Ring case gasket   Motor • Standard NEMA frame motor

Heavy Duty Positive Displacement Reversing Vane Pump - 12V GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft. Specifications: Self Priming: YES Thread NPT: 1/2" + Garden Hose Adaptor Control Type: Pump Mounted Reversing Switch Max GPM: 6.5 Breaker DC: 30 Amp

HotShot HD4 Heavy Duty Washdown Pump with 25' HoseCoil - 12V - 4 GPM - 60 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.