Flojet 01740-010 Strainer 3/4 Barb X Quad 90D
Flojet Strainer with Direct Plug-In Quad Port Outlet and 3/4” Hose Barb Inlet, 90 Degree Elbow Design, Fine 40 Mesh Stainless Steel Screen
Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
Maximum Water Temperature: 160F (70C)
Maximum Pressure: 70 PSI (5 bar)
Flojet 01740-950S Strainer 90' Quad X Quad
This Flojet 01740-950S strainer keeps debris out of your pump. Its 40 mesh screen is typically used for potable / drinking water applications. The strainer body is made of polypropylene with a clear cap and Buna-N o-rings. It has a 90 degree elbow design.
The strainer has a direct plug-in quad port outlet and female quad port inlet. You can use any standard snap-in quad port fitting for the inlet side. It will fit into the snap-in quad ports on Flojet diaphragm pumps under 6 GPM.
Materials are FDA approved
Easy-to-clean plastic bowl
Fine 40 mesh stainless steel screen
Ports: Quad Female to Quad Male
Set at 90 degrees from inlet to outlet
Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb
Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen
Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
Maximum Water Temperature: 160F (70C)
Maximum Pressure: 70 PSI (5 bar)
The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.
FloJet 01720-123S Strainer 3/8 Brb x 3/8 Npt PP
This is the replacement part for FloJet 01720-123
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
Stainless Steel Bow Eye - 3/8" x 4-1/4"
These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.
Flojet 01740-012 Strainer 1/2" Barb X Quad
These Flojet strainers are compatible with fresh or salt water and meet FDA standards for portable water. They will handle up to 7 gpm, have twist off clear bowls, and 40 mesh stainless steel screens.
Flojet 01720-375B Strainer 3/8 Brb 20 Mesh
Strainers for In-Line Applications. FDA Approved for Potable Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
Flojet 01720-010S Strainer Inlet 3/4Hb X Q
Strainers for In-Line Applications. FDA Approved for Potable Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)