GMR 18 xHD3 18" Radar Dome Loaded with advanced features typically found on open arrays, this powerful 18" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water. Features: 4 KW power output, 48 nautical mile max range Scan-averaging technology Improved target-size processing Split-screen dual-range display Bird detection Quiet dome-drive motor Scan Averaging Technology  A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. Faster Scanning Antenna  Rotation speeds up to 60 rpm improve the redraw rate for faster target updates. True Echo Trails A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface, where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. In the Box: GMR 18 xHD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 20" x 9.8" (508 mm x 248 mm) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): Up to 60 RPM, depending on settings Beam Width: 5.2° horizontal, 25° vertical Maximum Range: 48 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Dual Range: Yes Overlay: Yes Dual Radar Support: Yes Auto Bird Gain: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately) Echo Trails: True Target Size: Yes Scan Averaging: Yes

GMR™ 434 xHD3 4' Open Array Radar & Pedestal - 4kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 72-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor  New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 4 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 27.6 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 72 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 11-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 55 W Transmit Power: 4 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 436 xHD3 6' Open Array Radar & Pedestal - 4kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 72-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 4 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 29.6 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 72 in. (183 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 72 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 11-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 55 W Transmit Power: 4 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 1236 xHD3 6' Open Array Radar & Pedestal - 12kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 12 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 29.7 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 72 in. (183 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 12 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 2536 xHD3 6' Open Array Radar & Pedestal - 25kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 25 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 30.4 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 25 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 1234 xHD3 4' Open Array Radar & Pedestal - 12kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 12 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 27.7 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 12 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 2534 xHD3 4' Open Array Radar & Pedestal - 25kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 25 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 28.4 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 25 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Garmin GMR Fantom™ 254 Radar THE POWER TO SEE MORE GMR Fantom™ 254 is the most powerful 4’ consumer solid-state radar. The GMR Fantom™ 254, our most powerful 4’ solid-state radars, feature 250 W of power. They use MotionScope™ technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. New MARPA Automatic Acquisition allows for triggering and tracking with no user prompting on all returns, boundary zones, guard zones or MotionScope. Scan-to-scan averaging, a new feature, helps aid in reduction of sea clutter and interference. Its Pulse Compression technology provides high-resolution imaging and maximizes energy to help you detect and identify targets. Auto Bird Gain helps you identify flocks of birds on the water. The GMR Fantom 254 radar have a detection range of 20’ to 96 nautical miles. Features: We’ve got the power. 250 watts of it to be exact.  Know the long and short of it with a detection range of 20’ to 96 nautical miles.  MotionScope™ highlights everything that moves so there are no surprises.  The more the merrier with MARPA. Keep track of up to 30 moving targets.  Clear the clutter with scan-to-scan averaging. MotionScope™ Technology Detect and highlight moving targets in different colors to help avoid collisions, find flocks of birds and track weather from 20’ to 96 nautical miles. Automatic Acquisition New mini-automatic radar plotting aid (MARPA) automatic acquisition allows for triggering and tracking of up to 30 targets with no user prompting on all returns, boundary zones, guard zones or MotionScope™. Clear The Way Scan-to-scan averaging aids in reduction of sea clutter and interference, so you have a clear view of what’s out there.  Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface.  Pulse Compression This feature provides high-resolution imaging while maximizing energy to enhance target detection and identification.  Echo Trails True Echo Trails feature displays a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat.  Radar Overlay Overlay radar on your chart screen as single display or split screen with independent range settings.  Dynamic Sea Filter Dynamic Sea Filter automatically adjusts gain to calm, medium and rough sea conditions.  Guard Zone Set the safety zone and receive an alarm when an object enters the zone.  In The Box GMR Fantom 254 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation

Garmin GMR Fantom™ 256 Radar THE POWER TO SEE MORE GMR Fantom™ 256 is the most powerful 6’ consumer solid-state radar. The GMR Fantom™ 256, our most powerful 6’ solid-state radars, feature 250 W of power. They use MotionScope™ technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. New MARPA Automatic Acquisition allows for triggering and tracking with no user prompting on all returns, boundary zones, guard zones or MotionScope. Scan-to-scan averaging, a new feature, helps aid in reduction of sea clutter and interference. Its Pulse Compression technology provides high-resolution imaging and maximizes energy to help you detect and identify targets. Auto Bird Gain helps you identify flocks of birds on the water. The GMR Fantom 256 radar have a detection range of 20’ to 96 nautical miles. Features: We’ve got the power. 250 watts of it to be exact.  Know the long and short of it with a detection range of 20’ to 96 nautical miles.  MotionScope™ highlights everything that moves so there are no surprises.  The more the merrier with MARPA. Keep track of up to 30 moving targets.  Clear the clutter with scan-to-scan averaging. MotionScope™ Technology Detect and highlight moving targets in different colors to help avoid collisions, find flocks of birds and track weather from 20’ to 96 nautical miles. Automatic Acquisition New mini-automatic radar plotting aid (MARPA) automatic acquisition allows for triggering and tracking of up to 30 targets with no user prompting on all returns, boundary zones, guard zones or MotionScope™. Clear The Way Scan-to-scan averaging aids in reduction of sea clutter and interference, so you have a clear view of what’s out there.  Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface.  Pulse Compression This feature provides high-resolution imaging while maximizing energy to enhance target detection and identification.  Echo Trails True Echo Trails feature displays a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat.  Radar Overlay Overlay radar on your chart screen as single display or split screen with independent range settings.  Dynamic Sea Filter Dynamic Sea Filter automatically adjusts gain to calm, medium and rough sea conditions.  Guard Zone Set the safety zone and receive an alarm when an object enters the zone.  In The Box GMR Fantom 256 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation

GMR 24 xHD3 24" Radar Dome Loaded with advanced features typically found on open arrays, this powerful 24" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water. Features: 4 KW power output, 48 nautical mile max range Scan-averaging technology Improved target-size processing Split-screen dual-range display Bird detection Quiet dome-drive motor Scan Averaging Technology  A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. Faster Scanning Antenna  Rotation speeds up to 60 rpm improve the redraw rate for faster target updates. True Echo Trails A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface, where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. In the Box: GMR 24 xHD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 25.4" x 9.8" (64.5 cm x 24.9 cm) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): Up to 60 RPM, depending on settings Beam Width: 3.7° horizontal, 25° vertical Maximum Range: 48 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Dual Range: Yes Overlay: Yes Dual Radar Support: Yes Auto Bird Gain: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately) Echo Trails: True Target Size: Yes Scan Averaging: Yes

GMR 24 xHD Radar with 15m Cable 4 kW high-definition 24” dome radar Pairs ease of use with advanced open-array features 48 or 24 RPM rotation speeds for fast screen refreshes, auto adjusts as needed based on range 48 Mile max range setting No complex user settings, easy to install and start using Our next-generation, 4 kW high-definition GMR 24 xHD dome radar pairs ease of use with advanced open-array features. Its intuitive operation makes modes and settings simple to understand so you can enjoy great performance without a lot of technical know-how. The GMR 24 xHD has a narrower beam width that paints a very precise, high-resolution image. New Dynamic Auto Gain and Dynamic Sea Filter continually adjust to your surroundings, providing optimal performance in varying conditions. Choose from multiple levels of aggressiveness or use manual gain adjustment. Dual range operation allows fully independent split-screen display of far and close radar views in full 8-bit color (select chartplotters); range of 48 nm. Optional “No Transmit Zone” can protect areas behind the radar from being radiated while providing full forward-looking radar capability. This makes installation more flexible by providing more suitable installation options on your boat. In The Box: GMR 24 xHD Mounting hardware kit Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Installation instructions Mounting template Grommet for marine cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GMR Fantom™ 56 - 6' Open Array Radar High-powered Open-Array Radar 6’, 50W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings The GMR Fantom 54 solid-state radar with 50 W of power uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 72 nautical miles. High-power 50W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 72 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install and Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box GMR Fantom 56 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GMR Fantom™ 54 - 4' Open Array Radar High-powered Open-Array Radar 4’, 50W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings The GMR Fantom 54 solid-state radar with 50 W of power uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 72 nautical miles. High-power 50W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 72 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install and Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box GMR Fantom 54 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GMR Fantom™ 124 - 4' Open Array Radar Open-array Radar with Industry-leading 120 W Solid-state Output Power Features: 4’, 120 W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings Featuring 120W of power, GMR Fantom 126 is our most powerful 6’ solid-state radar. It uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 96 nautical miles. High-power 120W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 96 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install & Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box: GMR Fantom 126 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GMR Fantom™ 126 - 6' Open Array Radar  Open-array Radar with Industry-leading 120 W Solid-state Output Power Features: 6’, 120W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings Featuring 120W of power, GMR Fantom 126 is our most powerful 6’ solid-state radar. It uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 96 nautical miles. High-power 120W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 96 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install & Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box GMR Fantom 126 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.