|
GMR 18 HD3 18" Radar Dome
This compact 18" dome radar combines ease of use with powerful scanning features that work to maximize your confidence and situational awareness on the water.
Features:
4 KW power output, 36 nautical mile max range
Space-saving 18" dome
Marpa target tracking
Dynamic auto gain and sea filter
Dual-radar support
Quiet dome drive motor
Dual-Radar Support
Using dual radar provides redundancy and allows each display unit on the boat to pull data from one of two different radar sources.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
Radar Overlay
Overlay radar images onto your chartplotter’s map page. You can add an optional autopilot or heading sensor (sold separately) for the best results.
MARPA Target Tracking
MARPA tracks selected targets to help keep track of other vessels and avoid collisions (with appropriate sensors, sold separately).
Low-Noise Scanning
The reliable GMR HD3 dome drive motor spins at a fixed 24 rpm, offering reliable, low-noise operation and minimal power consumption.
Compact and Powerful
4 kW of transmit power, a 36 nautical mile maximum range, and clear echo definition at all ranges.
Close-In Target Scanning
Minimum scanning range of 20 meters for excellent short-range detection and target detail.
High-Resolution Radar
8-bit true color for outstanding target separation with less screen clutter.
Timed Transmit Mode
Specify transmit times down to the seconds to help reduce power consumption.
Intuitive operation
No complex user settings, so it’s easy to install and start using.
In the Box:
GMR 18 HD3 dome radar
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
General:
Dimensions: 20" diameter, 9.8" high (508 mm diameter, 248 mm high)
Weight: 7.0 kg
Waterproof: IPX7
Antenna length: 17" (43 cm)
Rotation Speed (RPM): 24 rpm
Beam Width: 5.2° horizontal, 25° vertical
Maximum Range: 36 nm
Minimum Range: 20 meters
Radar Type: Radome
Electrical Features:
Power Input: 11-32 v DC
Power Consumption (Standby): 15 W
Typical Power Consumption, Transmitting (Normal Mode): 40 W
Transmit Power: 4 KW
Radar Features:
Overlay: Yes
Dual Radar Support: Yes
Auto Gain: Dynamic
MARPA Target Tracking: Yes (requires heading sensor, sold separately)
|
2159.99 |
|
|
GMR™ 434 xHD3 4' Open Array Radar & Pedestal - 4kW
SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR
Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore.
Up to 72-nautical mile range
Scan Averaging Technology
Improved Target-Size Processing
Split-Screen Dual-Range Display
100-Knot Commercial Grade Wind Rating1
Quiet Open-Array Drive Motor
New Scan Averaging Technology
A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.
Angular Target-Size Adjustment
Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.
True Echo Trails
A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats.
Dual Range with Overlay
A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters.
Radar Overlay
See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).
High-Resolution Radar
Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain.
Dual-Radar Support
This provides redundancy and allows each display unit to pull data from different sources.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
Auto Bird Gain
Locate flocks of birds at the water’s surface where baitfish are also likely to be found.
MARPA Target Tracking
Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).
Guard Zone
Set the safety zone, and receive an alarm when an object enters the zone.
Range and Bearing Cues
Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.
Includes:
GMR xHD3 4 kW open array radar with 4’ antenna
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
Dimensions:
4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7"
Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4"
Weight:
4' array and pedestal - 27.6 kg
Specifications:
Waterproof: IPX6
Max Wind Load: 80KT (100KT with optional voltage converter upgrade)
Antenna length: 48 in. (122 CM)
Rotation Speed (RPM): 24 and 48 RPM
Beam Width: 1.8° horizontal, 23° vertical
Maximum Range: 72 nautical miles
Minimum Range: 20 meters
Radar Type: Open-array
Electrical Features:
Power Input: 11-32 V DC
Power Consumption (Standby): 18 W
Typical Power Consumption, Transmitting (Normal mode): 55 W
Transmit Power: 4 kW
14-kW versions require optional equipment (sold separately) for 100-knot wind rating
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
5169.99 |
|
|
GMR™ 436 xHD3 6' Open Array Radar & Pedestal - 4kW
SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR
Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore.
Up to 72-nautical mile range
Scan Averaging Technology
Improved Target-Size Processing
Split-Screen Dual-Range Display
100-Knot Commercial Grade Wind Rating1
Quiet Open-Array Drive Motor
New Scan Averaging Technology
A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.
Angular Target-Size Adjustment
Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.
True Echo Trails
A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats.
Dual Range with Overlay
A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters.
Radar Overlay
See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).
High-Resolution Radar
Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain.
Dual-Radar Support
This provides redundancy and allows each display unit to pull data from different sources.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
Auto Bird Gain
Locate flocks of birds at the water’s surface where baitfish are also likely to be found.
MARPA Target Tracking
Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).
Guard Zone
Set the safety zone, and receive an alarm when an object enters the zone.
Range and Bearing Cues
Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.
Includes:
GMR xHD3 4 kW open array radar with 6’ antenna
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
Dimensions:
6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7"
Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4"
Weight:
6' array and pedestal - 29.6 kg
Specifications:
Waterproof: IPX6
Max Wind Load: 80KT (100KT with optional voltage converter upgrade)
Antenna length: 72 in. (183 CM)
Rotation Speed (RPM): 24 and 48 RPM
Beam Width: 1.1° horizontal, 23° vertical
Maximum Range: 72 nautical miles
Minimum Range: 20 meters
Radar Type: Open-array
Electrical Features:
Power Input: 11-32 V DC
Power Consumption (Standby): 18 W
Typical Power Consumption, Transmitting (Normal mode): 55 W
Transmit Power: 4 kW
14-kW versions require optional equipment (sold separately) for 100-knot wind rating
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
6049.99 |
|
|
GMR™ 1236 xHD3 6' Open Array Radar & Pedestal - 12kW
SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR
Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore.
Up to 96-nautical mile range
Scan Averaging Technology
Improved Target-Size Processing
Split-Screen Dual-Range Display
100-Knot Commercial Grade Wind Rating1
Quiet Open-Array Drive Motor
New Scan Averaging Technology
A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.
Angular Target-Size Adjustment
Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.
True Echo Trails
A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats.
Dual Range with Overlay
A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters.
Radar Overlay
See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).
High-Resolution Radar
Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain.
Dual-Radar Support
This provides redundancy and allows each display unit to pull data from different sources.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
Auto Bird Gain
Locate flocks of birds at the water’s surface where baitfish are also likely to be found.
MARPA Target Tracking
Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).
Guard Zone
Set the safety zone, and receive an alarm when an object enters the zone.
Range and Bearing Cues
Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.
Includes:
GMR xHD3 12 kW open array radar with 6’ antenna
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
Dimensions:
6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7"
Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4"
Weight:
6' array and pedestal - 29.7 kg
Specifications:
Waterproof: IPX6
Max Wind Load: 80KT (100KT with optional voltage converter upgrade)
Antenna length: 72 in. (183 CM)
Rotation Speed (RPM): 24 and 48 RPM
Beam Width: 1.1° horizontal, 23° vertical
Maximum Range: 96 nautical miles
Minimum Range: 20 meters
Radar Type: Open-array
Electrical Features:
Power Input: 10-32 V DC
Power Consumption (Standby): 18 W
Typical Power Consumption, Transmitting (Normal mode): 70 W
Transmit Power: 12 kW
14-kW versions require optional equipment (sold separately) for 100-knot wind rating
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
8029.99 |
|
|
GMR™ 2536 xHD3 6' Open Array Radar & Pedestal - 25kW
SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR
Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore.
Up to 96-nautical mile range
Scan Averaging Technology
Improved Target-Size Processing
Split-Screen Dual-Range Display
100-Knot Commercial Grade Wind Rating1
Quiet Open-Array Drive Motor
New Scan Averaging Technology
A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.
Angular Target-Size Adjustment
Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.
True Echo Trails
A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats.
Dual Range with Overlay
A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters.
Radar Overlay
See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).
High-Resolution Radar
Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain.
Dual-Radar Support
This provides redundancy and allows each display unit to pull data from different sources.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
Auto Bird Gain
Locate flocks of birds at the water’s surface where baitfish are also likely to be found.
MARPA Target Tracking
Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).
Guard Zone
Set the safety zone, and receive an alarm when an object enters the zone.
Range and Bearing Cues
Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.
Includes:
GMR xHD3 25 kW open array radar with 6’ antenna
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
Dimensions:
6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7"
Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4"
Weight:
6' array and pedestal - 30.4 kg
Specifications:
Waterproof: IPX6
Max Wind Load: 80KT (100KT with optional voltage converter upgrade)
Antenna length: 48 in. (122 CM)
Rotation Speed (RPM): 24 and 48 RPM
Beam Width: 1.1° horizontal, 23° vertical
Maximum Range: 96 nautical miles
Minimum Range: 20 meters
Radar Type: Open-array
Electrical Features:
Power Input: 10-32 V DC
Power Consumption (Standby): 18 W
Typical Power Consumption, Transmitting (Normal mode): 70 W
Transmit Power: 25 kW
14-kW versions require optional equipment (sold separately) for 100-knot wind rating
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
10669.99 |
|
|
GMR 18 xHD3 18" Radar Dome
Loaded with advanced features typically found on open arrays, this powerful 18" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water.
Features:
4 KW power output, 48 nautical mile max range
Scan-averaging technology
Improved target-size processing
Split-screen dual-range display
Bird detection
Quiet dome-drive motor
Scan Averaging Technology
A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.
Angular Target-Size Adjustment
Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.
Faster Scanning Antenna
Rotation speeds up to 60 rpm improve the redraw rate for faster target updates.
True Echo Trails
A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats.
Dual Range with Overlay
A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters.
Radar Overlay
See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).
High-Resolution Radar
Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain.
Dual-Radar Support
This provides redundancy and allows each display unit to pull data from different sources.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions.
Auto Bird Gain
Locate flocks of birds at the water’s surface, where baitfish are also likely to be found.
MARPA Target Tracking
Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).
Guard Zone
Set the safety zone and receive an alarm when an object enters the zone.
Range and Bearing Cues
Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.
In the Box:
GMR 18 xHD3 dome radar
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
General:
Dimensions: 20" x 9.8" (508 mm x 248 mm)
Weight: 7.0 kg
Waterproof: IPX7
Antenna length: 17" (43 cm)
Rotation Speed (RPM): Up to 60 RPM, depending on settings
Beam Width: 5.2° horizontal, 25° vertical
Maximum Range: 48 nm
Minimum Range: 20 meters
Radar Type: Radome
Electrical Features:
Power Input: 11-32 v DC
Power Consumption (Standby): 15 W
Typical Power Consumption, Transmitting (Normal Mode): 40 W
Transmit Power: 4 KW
Radar Features:
Dual Range: Yes
Overlay: Yes
Dual Radar Support: Yes
Auto Bird Gain: Yes
Auto Gain: Dynamic
MARPA Target Tracking: Yes (requires heading sensor, sold separately)
Echo Trails: True
Target Size: Yes
Scan Averaging: Yes
|
2399.99 |
|
|
GMR™ 1234 xHD3 4' Open Array Radar & Pedestal - 12kW
SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR
Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore.
Up to 96-nautical mile range
Scan Averaging Technology
Improved Target-Size Processing
Split-Screen Dual-Range Display
100-Knot Commercial Grade Wind Rating1
Quiet Open-Array Drive Motor
New Scan Averaging Technology
A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.
Angular Target-Size Adjustment
Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.
True Echo Trails
A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats.
Dual Range with Overlay
A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters.
Radar Overlay
See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).
High-Resolution Radar
Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain.
Dual-Radar Support
This provides redundancy and allows each display unit to pull data from different sources.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
Auto Bird Gain
Locate flocks of birds at the water’s surface where baitfish are also likely to be found.
MARPA Target Tracking
Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).
Guard Zone
Set the safety zone, and receive an alarm when an object enters the zone.
Range and Bearing Cues
Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.
Includes:
GMR xHD3 12 kW open array radar with 4’ antenna
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
Dimensions:
4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7"
Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4"
Weight:
4' array and pedestal - 27.7 kg
Specifications:
Waterproof: IPX6
Max Wind Load: 80KT (100KT with optional voltage converter upgrade)
Antenna length: 48 in. (122 CM)
Rotation Speed (RPM): 24 and 48 RPM
Beam Width: 1.8° horizontal, 23° vertical
Maximum Range: 96 nautical miles
Minimum Range: 20 meters
Radar Type: Open-array
Electrical Features:
Power Input: 10-32 V DC
Power Consumption (Standby): 18 W
Typical Power Consumption, Transmitting (Normal mode): 70 W
Transmit Power: 12 kW
14-kW versions require optional equipment (sold separately) for 100-knot wind rating
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
7149.99 |
|
|
GMR™ 2534 xHD3 4' Open Array Radar & Pedestal - 25kW
SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR
Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore.
Up to 96-nautical mile range
Scan Averaging Technology
Improved Target-Size Processing
Split-Screen Dual-Range Display
100-Knot Commercial Grade Wind Rating1
Quiet Open-Array Drive Motor
New Scan Averaging Technology
A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.
Angular Target-Size Adjustment
Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.
True Echo Trails
A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats.
Dual Range with Overlay
A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters.
Radar Overlay
See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).
High-Resolution Radar
Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain.
Dual-Radar Support
This provides redundancy and allows each display unit to pull data from different sources.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
Auto Bird Gain
Locate flocks of birds at the water’s surface where baitfish are also likely to be found.
MARPA Target Tracking
Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).
Guard Zone
Set the safety zone, and receive an alarm when an object enters the zone.
Range and Bearing Cues
Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.
Includes:
GMR xHD3 25 kW open array radar with 4’ antenna
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
Dimensions:
4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7"
Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4"
Weight:
4' array and pedestal - 28.4 kg
Specifications:
Waterproof: IPX6
Max Wind Load: 80KT (100KT with optional voltage converter upgrade)
Antenna length: 48 in. (122 CM)
Rotation Speed (RPM): 24 and 48 RPM
Beam Width: 1.8° horizontal, 23° vertical
Maximum Range: 96 nautical miles
Minimum Range: 20 meters
Radar Type: Open-array
Electrical Features:
Power Input: 10-32 V DC
Power Consumption (Standby): 18 W
Typical Power Consumption, Transmitting (Normal mode): 70 W
Transmit Power: 25 kW
14-kW versions require optional equipment (sold separately) for 100-knot wind rating
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
9789.99 |
|
|
GPSMAP® 943xsv with GMR™ 18 HD3 Radome
With its sleek design, powerful processing, and upgraded IPS display, this advanced 9" chartplotter integrates seamlessly into your Garmin marine system.
Features:
Easily integrate with more engines
Connect to compatible third-party devices with OneHelm™ digital switching
Easily build your marine system using the best network connectivity
Navigate any waters with preloaded Garmin Navionics+™ charts and mapping
See below for your boat's built-in sonar capabilities
Manage your marine experience from nearly anywhere
Ultra-High-Definition Scanning Sonar
Get built-in ultra-high-definition sidevü and clearvü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. Gpsmap® X3 series also supports 1 KW chirp traditional sonar capabilities.
Panoptix™ Sonar Support
Pair with panoptix or livescope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real-time.
Faster, Sharper, Smarter
With its added processing power and slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations.
Improved Display Optics
This higher-resolution display offers improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation GPSMAP devices.
Preloaded Mapping
Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters.
Optional Charts & Maps
Bring a fresh look and feel to your chartplotter with the optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more.
Optional Radar Bundle
To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package.
Power-Pole® Shallow Water Anchor
By networking select Garmin chartplotters with a force® trolling motor and your compatible power-pole shallow water anchoring system, you can access advanced boat control features from your plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and auto guidance end-of-route anchoring. Spend more time fishing and less time positioning.
Garmin Sailassist™ Sailing Features
View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields, tide/current/time slider, wind angle, set and drift, wind speed, polars, and more.
Sailing Polars
Use the polar table to see key data, including how fast you should go at a certain wind angle and speed, so you know whether you need to adjust sail trim.
Garmin Marine Network
If you have multiple compatible Garmin devices on your boat, you can share information—such as maps, user data, radar, and IP camera video—among them.
NMEA 2000® and NMEA 0183 Networks
Connect to compatible autopilots, digital switching, weather, fusion-link™ audio system, media, VHF, AIS, and more from one screen.
Activecaptain® App
Built-in wi-fi® connectivity pairs with the free all-in-one mobile app for access to the onechart™ feature, smart notifications, software updates, helm, Garmin quickdraw™ community data, and more.
Integrated Ant® Technology
Connect with some of your favorite devices, such as Quatix® marine watches, gWind™ wireless 2 transducers, GNX™ wind marine instruments, and wireless remote controls.
Engine Connectivity
Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines.
OneHelm Feature
This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen.
Send inReach® Device Messages
Pair your inreach satellite COMMUNICATOR5 to your chartplotter and type custom messages using your mfd’s on-screen keyboard. Access your contact list or enter an email, inreach address, or phone number. You can also group messages by conversation for a texting-like experience.
In the Box (chartplotter):
GPSMAP 943xsv chartplotter
microSD™ card preinstalled
Power cable
NMEA 2000® T-connector
NMEA 2000 drop cable (2 meters)
8-pin transducer to 12-pin sounder adapter cable
Bail mount kit with knobs
Flush mount kit with gasket
Protective cover
Trim-piece snap covers
Documentation
In the Box (radome):
GMR 18 HD3 dome radar
Power cable (49.21 ft)
Network cable (49.21 ft)
Mounting hardware kit and template
Installation instructions
General:
Dimension: 9.2” x 6.4” x 3” (23.3 x 16.2 x 7.6 cm)
Weight: 3.6 lbs (1.6 KG)
Waterproof: IPX7
Touchscreen: Yes
Display Type: WXGA
Display Size: 7.8” x 4.4”; 9.0” diagonal (19.9 cm x 11.2 cm; 22.9 cm diagonal)
Display Resolution: 1280 x 720 pixels
Mounting Options: Bail, flush, or flat (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge are required.)
Input: Touchscreen
Maps & Memory:
Accepts Data Cards: 2 MicroSD cards (Back of Unit)
Waypoints: 5000
Track Points: 50,000
Tracks: 50 saved tracks
Navigation Routes: 100
Sensors:
GPS: Yes
Glonass: Yes
Galileo: Yes
Has Built-In Receiver: Yes
Receiver: 10Hz
NMEA 2000 Compatible: Yes
NMEA 0183 Compatible: Yes
Supports WAAS: Yes
Built-In Maps:
Built-in Auto Guidance+: Yes
Garmin Navionics+ Inland & Coastal: Yes
Tide Tables: Yes
Optional Map Support:
Garmin Navionics+™: Yes
Garmin Navionics Vision+™: Yes
Topo 100K: Yes
Standard Mapping: Yes
Garmin Quickdraw Contours: Yes
Raster Chart Support: Yes
Chartplotter Features:
Smart Mode Compatible: Yes
AIS: Yes
DSC: Yes
Supports Fusion-Link™ Compatible Radios: Yes
GSD Black Box Sonar Support: Yes
GCV Black Box Sonar Support: Yes
Activecaptain® Compatible: Yes
Grid (Garmin Remote Input Device) Compatible: Yes
Wireless Remote Compatible: Yes
Sailing Features: Yes
Spoken Audio Alerts: Yes
Onehelm Support: Yes
Electrical Features:
Power Input: 10 to 32 Vdc
Typical Current Draw at 12 Vdc: 1.37 A
Maximum Current Draw at 12 Vdc: 3.20 A
Maximum Power Usage at 10 Vdc: 40.2w
Sonar Features & Specifications:
Displays Sonar: Yes
Power Output: 1 KW
Traditional Sonar (Dual Frequency/Beam): Built-in (Single Channel Chirp, 50/70/83/200 Khz, L, M, H Chirp)
Clearvü: Built-in 260/455/800/1000/1200 kHz
Sidevü: Built-in 260/455/800/1000/1200 kHz
Panoptix™ Sonar: Yes
Livescope: Yes
Connections:
NMEA 2000® Ports: 1
Connections NMEA0183 Input Ports: 1
NMEA 0183 Input (TX) Ports: 1
Video Input Ports: 1 (BNC Composite)
J1939 Ports: 1
Garmin Marine Network Ports: 1
12-Pin Transducer Ports: 1
USB Ports: Yes
BNC External GPS Antenna Port: Yes
Bluetooth® Pairing: Yes
Ant+ (Connectivity): Yes
Garmin Wi-Fi Network (Local Connection): Yes
|
3409.99 |
|
|
GPSMAP® 1243xsv with GMR™ 18 HD3 Radome
With its sleek design, powerful processing, and upgraded IPS display, this advanced 12" chartplotter integrates seamlessly into your Garmin marine system.
Features:
Easily integrate with more engines
Connect to compatible third-party devices with OneHelm™ digital switching
Easily build your marine system using the best network connectivity
Navigate any waters with preloaded Garmin Navionics+™ charts and mapping
See below for your boat's built-in sonar capabilities
Manage your marine experience from nearly anywhere
Ultra-High-Definition Scanning Sonar
Get built-in ultra-high-definition sidevü and clearvü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. Gpsmap® X3 series also supports 1 KW chirp traditional sonar capabilities.
Panoptix™ Sonar Support
Pair with panoptix or livescope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real-time.
Faster, Sharper, Smarter
With its added processing power and slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations.
Improved Display Optics
This higher-resolution display offers improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation GPSMAP devices.
Preloaded Mapping
Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters.
Optional Charts & Maps
Bring a fresh look and feel to your chartplotter with the optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more.
Optional Radar Bundle
To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package.
Power-Pole® Shallow Water Anchor
By networking select Garmin chartplotters with a force® trolling motor and your compatible power-pole shallow water anchoring system, you can access advanced boat control features from your plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and auto guidance end-of-route anchoring. Spend more time fishing and less time positioning.
Garmin Sailassist™ Sailing Features
View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields, tide/current/time slider, wind angle, set and drift, wind speed, polars, and more.
Sailing Polars
Use the polar table to see key data, including how fast you should go at a certain wind angle and speed, so you know whether you need to adjust sail trim.
Garmin Marine Network
If you have multiple compatible Garmin devices on your boat, you can share information—such as maps, user data, radar, and IP camera video—among them.
NMEA 2000® and NMEA 0183 Networks
Connect to compatible autopilots, digital switching, weather, fusion-link™ audio system, media, VHF, AIS, and more from one screen.
Activecaptain® App
Built-in wi-fi® connectivity pairs with the free all-in-one mobile app for access to the onechart™ feature, smart notifications, software updates, helm, Garmin quickdraw™ community data, and more.
Integrated Ant® Technology
Connect with some of your favorite devices, such as Quatix® marine watches, gWind™ wireless 2 transducers, GNX™ wind marine instruments, and wireless remote controls.
Engine Connectivity
Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines.
OneHelm Feature
This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen.
Send inReach® Device Messages
Pair your inreach satellite COMMUNICATOR5 to your chartplotter and type custom messages using your mfd’s on-screen keyboard. Access your contact list or enter an email, inreach address, or phone number. You can also group messages by conversation for a texting-like experience.
In the Box (chartplotter):
GPSMAP 1243xsv chartplotter
microSD™ card preinstalled
Power cable
NMEA 2000® T-connector
NMEA 2000 drop cable (2 meters)
8-pin transducer to 12-pin sounder adapter cable
Bail mount kit with knobs
Flush mount kit with gasket
Protective cover
Trim-piece snap covers
Documentation
In the Box (radome):
GMR 18 HD3 dome radar
Power cable (49.21 ft)
Network cable (49.21 ft)
Mounting hardware kit and template
Installation instructions
General:
Dimension: 12.1" x 8.9" x 3.2" (30.8 x 22.8 x 8.2 cm)
Weight: 6.6 lbs (3.0 KG)
Waterproof: IPX7
Touchscreen: Yes
Display Type: WXGA
Display Size: 10.3" x 6.4"; 12.1" diagonal (26.2 x 16.3 cm; 30.7 cm diagonal)
Display Resolution: 1280 x 720 pixels
Mounting Options: Bail, flush, or flat (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge is required.)
Input: Touchscreen
Maps & Memory:
Accepts Data Cards: 2 MicroSD cards (Back of Unit)
Waypoints: 5000
Track Points: 50,000
Tracks: 50 saved tracks
Navigation Routes: 100
Sensors:
GPS: Yes
Glonass: Yes
Galileo: Yes
Has Built-In Receiver: Yes
Receiver: 10Hz
NMEA 2000 Compatible: Yes
NMEA 0183 Compatible: Yes
Supports WAAS: Yes
Built-In Maps:
Built-in Auto Guidance+: Yes
Garmin Navionics+ Inland & Coastal: Yes
Tide Tables: Yes
Optional Map Support:
Garmin Navionics+™: Yes
Garmin Navionics Vision+™: Yes
Topo 100K: Yes
Standard Mapping: Yes
Garmin Quickdraw Contours: Yes
Raster Chart Support: Yes
Chartplotter Features:
Smart Mode Compatible: Yes
AIS: Yes
DSC: Yes
Supports Fusion-Link™ Compatible Radios: Yes
GSD Black Box Sonar Support: Yes
GCV Black Box Sonar Support: Yes
Activecaptain® Compatible: Yes
Grid (Garmin Remote Input Device) Compatible: Yes
Wireless Remote Compatible: Yes
Sailing Features: Yes
Spoken Audio Alerts: Yes
Onehelm Support: Yes
Electrical Features:
Power Input: 10 to 32 Vdc
Typical Current Draw at 12 Vdc: 1.37 A
Maximum Current Draw at 12 Vdc: 3.20 A
Maximum Power Usage at 10 Vdc: 40.2w
Sonar Features & Specifications:
Displays Sonar: Yes
Power Output: 1 KW
Traditional Sonar (Dual Frequency/Beam): Built-in (Single Channel Chirp, 50/70/83/200 Khz, L, M, H Chirp)
Clearvü: Built-in 260/455/800/1000/1200 kHz
Sidevü: Built-in 260/455/800/1000/1200 kHz
Panoptix™ Sonar: Yes
Livescope: Yes
Connections:
NMEA 2000® Ports: 1
Connections NMEA0183 Input Ports: 1
NMEA 0183 Input (TX) Ports: 1
Video Input Ports: 1 (BNC Composite)
Video Output Ports: 1 HDMI
J1939 Ports: 1
Garmin Marine Network Ports: 2
12-Pin Transducer Ports: 1
USB Ports: Yes
BNC External GPS Antenna Port: Yes
Bluetooth® Pairing: Yes
Ant+ (Connectivity): Yes
Garmin Wi-Fi Network (Local Connection): Yes
|
5059.99 |
|
|
Garmin GMR Fantom™ 254 Radar
THE POWER TO SEE MORE
GMR Fantom™ 254 is the most powerful 4’ consumer solid-state radar.
The GMR Fantom™ 254, our most powerful 4’ solid-state radars, feature 250 W of power. They use MotionScope™ technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. New MARPA Automatic Acquisition allows for triggering and tracking with no user prompting on all returns, boundary zones, guard zones or MotionScope. Scan-to-scan averaging, a new feature, helps aid in reduction of sea clutter and interference. Its Pulse Compression technology provides high-resolution imaging and maximizes energy to help you detect and identify targets. Auto Bird Gain helps you identify flocks of birds on the water. The GMR Fantom 254 radar have a detection range of 20’ to 96 nautical miles.
Features:
We’ve got the power. 250 watts of it to be exact.
Know the long and short of it with a detection range of 20’ to 96 nautical miles.
MotionScope™ highlights everything that moves so there are no surprises.
The more the merrier with MARPA. Keep track of up to 30 moving targets.
Clear the clutter with scan-to-scan averaging.
MotionScope™ Technology
Detect and highlight moving targets in different colors to help avoid collisions, find flocks of birds and track weather from 20’ to 96 nautical miles.
Automatic Acquisition
New mini-automatic radar plotting aid (MARPA) automatic acquisition allows for triggering and tracking of up to 30 targets with no user prompting on all returns, boundary zones, guard zones or MotionScope™.
Clear The Way
Scan-to-scan averaging aids in reduction of sea clutter and interference, so you have a clear view of what’s out there.
Auto Bird Gain
Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface.
Pulse Compression
This feature provides high-resolution imaging while maximizing energy to enhance target detection and identification.
Echo Trails
True Echo Trails feature displays a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat.
Radar Overlay
Overlay radar on your chart screen as single display or split screen with independent range settings.
Dynamic Sea Filter
Dynamic Sea Filter automatically adjusts gain to calm, medium and rough sea conditions.
Guard Zone
Set the safety zone and receive an alarm when an object enters the zone.
In The Box
GMR Fantom 254 antenna and pedestal
Mounting hardware kit and template
Right angle power cable (15 meters)
Right angle network cable (15 meters)
Voltage converter
Documentation
|
12319.99 |
|
|
Garmin GMR Fantom™ 256 Radar
THE POWER TO SEE MORE
GMR Fantom™ 256 is the most powerful 6’ consumer solid-state radar.
The GMR Fantom™ 256, our most powerful 6’ solid-state radars, feature 250 W of power. They use MotionScope™ technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. New MARPA Automatic Acquisition allows for triggering and tracking with no user prompting on all returns, boundary zones, guard zones or MotionScope. Scan-to-scan averaging, a new feature, helps aid in reduction of sea clutter and interference. Its Pulse Compression technology provides high-resolution imaging and maximizes energy to help you detect and identify targets. Auto Bird Gain helps you identify flocks of birds on the water. The GMR Fantom 256 radar have a detection range of 20’ to 96 nautical miles.
Features:
We’ve got the power. 250 watts of it to be exact.
Know the long and short of it with a detection range of 20’ to 96 nautical miles.
MotionScope™ highlights everything that moves so there are no surprises.
The more the merrier with MARPA. Keep track of up to 30 moving targets.
Clear the clutter with scan-to-scan averaging.
MotionScope™ Technology
Detect and highlight moving targets in different colors to help avoid collisions, find flocks of birds and track weather from 20’ to 96 nautical miles.
Automatic Acquisition
New mini-automatic radar plotting aid (MARPA) automatic acquisition allows for triggering and tracking of up to 30 targets with no user prompting on all returns, boundary zones, guard zones or MotionScope™.
Clear The Way
Scan-to-scan averaging aids in reduction of sea clutter and interference, so you have a clear view of what’s out there.
Auto Bird Gain
Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface.
Pulse Compression
This feature provides high-resolution imaging while maximizing energy to enhance target detection and identification.
Echo Trails
True Echo Trails feature displays a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat.
Radar Overlay
Overlay radar on your chart screen as single display or split screen with independent range settings.
Dynamic Sea Filter
Dynamic Sea Filter automatically adjusts gain to calm, medium and rough sea conditions.
Guard Zone
Set the safety zone and receive an alarm when an object enters the zone.
In The Box
GMR Fantom 256 antenna and pedestal
Mounting hardware kit and template
Right angle power cable (15 meters)
Right angle network cable (15 meters)
Voltage converter
Documentation
|
12869.99 |
|
|
GMR 24 xHD3 24" Radar Dome
Loaded with advanced features typically found on open arrays, this powerful 24" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water.
Features:
4 KW power output, 48 nautical mile max range
Scan-averaging technology
Improved target-size processing
Split-screen dual-range display
Bird detection
Quiet dome-drive motor
Scan Averaging Technology
A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.
Angular Target-Size Adjustment
Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.
Faster Scanning Antenna
Rotation speeds up to 60 rpm improve the redraw rate for faster target updates.
True Echo Trails
A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats.
Dual Range with Overlay
A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart.
Dynamic Auto Gain
Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters.
Radar Overlay
See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).
High-Resolution Radar
Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain.
Dual-Radar Support
This provides redundancy and allows each display unit to pull data from different sources.
Dynamic Sea Filter
Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions.
Auto Bird Gain
Locate flocks of birds at the water’s surface, where baitfish are also likely to be found.
MARPA Target Tracking
Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).
Guard Zone
Set the safety zone and receive an alarm when an object enters the zone.
Range and Bearing Cues
Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.
In the Box:
GMR 24 xHD3 dome radar
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Mounting hardware kit and template
Installation instructions
General:
Dimensions: 25.4" x 9.8" (64.5 cm x 24.9 cm)
Weight: 7.0 kg
Waterproof: IPX7
Antenna length: 17" (43 cm)
Rotation Speed (RPM): Up to 60 RPM, depending on settings
Beam Width: 3.7° horizontal, 25° vertical
Maximum Range: 48 nm
Minimum Range: 20 meters
Radar Type: Radome
Electrical Features:
Power Input: 11-32 v DC
Power Consumption (Standby): 15 W
Typical Power Consumption, Transmitting (Normal Mode): 40 W
Transmit Power: 4 KW
Radar Features:
Dual Range: Yes
Overlay: Yes
Dual Radar Support: Yes
Auto Bird Gain: Yes
Auto Gain: Dynamic
MARPA Target Tracking: Yes (requires heading sensor, sold separately)
Echo Trails: True
Target Size: Yes
Scan Averaging: Yes
|
3219.99 |
|
|
GMR 24 xHD Radar with 15m Cable
4 kW high-definition 24” dome radar
Pairs ease of use with advanced open-array features
48 or 24 RPM rotation speeds for fast screen refreshes, auto adjusts as needed based on range
48 Mile max range setting
No complex user settings, easy to install and start using
Our next-generation, 4 kW high-definition GMR 24 xHD dome radar pairs ease of use with advanced open-array features. Its intuitive operation makes modes and settings simple to understand so you can enjoy great performance without a lot of technical know-how.
The GMR 24 xHD has a narrower beam width that paints a very precise, high-resolution image. New Dynamic Auto Gain and Dynamic Sea Filter continually adjust to your surroundings, providing optimal performance in varying conditions. Choose from multiple levels of aggressiveness or use manual gain adjustment. Dual range operation allows fully independent split-screen display of far and close radar views in full 8-bit color (select chartplotters); range of 48 nm. Optional “No Transmit Zone” can protect areas behind the radar from being radiated while providing full forward-looking radar capability. This makes installation more flexible by providing more suitable installation options on your boat.
In The Box:
GMR 24 xHD
Mounting hardware kit
Power cable (15 m/49.21 ft)
Network cable (15 m/49.21 ft)
Installation instructions
Mounting template
Grommet for marine cable
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1800.00 |
|
|
GMR Fantom™ 56 - 6' Open Array Radar
High-powered Open-Array Radar
6’, 50W solid-state open-array radar with pedestal
MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather
Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification
True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat
Overlay radar on your chart screen as single display or split screen with independent range settings
The GMR Fantom 54 solid-state radar with 50 W of power uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 72 nautical miles.
High-power 50W Radar with Narrow Beam
You get excellent close- and long-range target detection from as close as 20’ to 72 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates.
MotionScope Doppler Technology
GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface.
Echo Trails
A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network.
Auto Bird Gain
Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found.
Dynamic Auto Gain and Sea Filter Settings
Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering.
Target Size
You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details.
Dual Range with Radar Overlay
The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results.
MARPA Target Tracking
Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions.
Dual Radar Support
This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources.
Guard Zone
Set the safety zone, and receive an alarm when an object enters the zone.
Easy Interpretation
Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances.
Easy to Install and Use
All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions.
In The Box
GMR Fantom 56 antenna and pedestal
Mounting hardware kit and template
Right angle power cable (15 meters)
Right angle network cable (15 meters)
Documentation
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
7369.99 |
|