|
AC Universal Plug Holder - Black
Features:
Black AC Universal Plug Holder is designed for all standard 120V AC plugs
Plug clamp insert included—converts plug holder to an AC inlet for battery chargers
No cutting, stripping, or rewiring of AC power cord
Watertight and UV resistant cover. Stainless steel mounting screws included
Easy to reach safe AC power cord connections
|
10.31 |
|
|
AC Universal Plug Holder - White
Features:
White AC Universal Plug Holder is designed for all standard 120V AC plugs
Plug clamp insert included - converts plug holder to an AC inlet for battery chargers
No cutting, stripping, or rewiring of AC power cord
Watertight and UV resistant cover
Stainless steel mounting screws included
Easy to reach safe AC power cord connections
|
10.31 |
|
|
289 R-5 Universal Rod Holder without Mount
The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.
The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.
*Mount sold separately
Features:
Easy adjustable lock bar tension
Designed and built to withstand all conditions and backed by the Scotty name
In the Box:
290 R-5 Rod Holder
*Sold as an Individual
|
24.25 |
|
|
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe
Color:Black
Pipe Size:#1
Fits:1.050" O.D. Pipe
Mount:Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe
Color:Black
Pipe Size:#3
Fits:1.660" O.D. Pipe
Mount:Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
102.28 |
|
|
RAM-A-CAN™ II Universal Cup Holder Base
The RAP-299-3U serves as a mounting point for RAM 1" double socket ball mounts. Included are support fins that flex, making the cup holder base conform to most vehicle cup holders. Also included is hardware to attach a RAM diamond base to the cup holder base.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
25.30 |
|
|
290 R-5 Universal Rod Holder w/Mount
The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.
The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod.
Features:
Easy adjustable lock bar tension
Designed and built to withstand all conditions and backed by the Scotty name
In the Box:
290 R-5 rod holder
241 Side deck mount
*Sold as an Individual
|
25.96 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.050 O.D. Pipe
Color: Black
Pipe Size:#1
Fits:1.050" O.D. Pipe
Mount: Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.315 O.D. Pipe
Color: Black
Pipe Size: #2
Fits: 1.315" O.D. Pipe
Mount: Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. Pipe
Color: Black
Pipe Size: #3
Fits: 1.660" O.D. Pipe
Mount: Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D.
Pipe
Color:Black
Pipe Size:#5
Fits:2.375" O.D. Pipe
Mount:Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe
Color:Black
Pipe Size:#2
Fits:1.315" O.D. Pipe
Mount:Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe
Specifications:
Color: Black
Pipe Size: #4
Fits: 1.900" O.D. Pipe
Mount: Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
RAM-A-CAN™ II Universal Cup Holder Base with Double Ball Mount
The RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder base. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN™ II cup holder base serves as a mounting point for the diamond base.
Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5".
Specifications:
Material: High Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
|
40.86 |
|
|
RAM® Power Plate™ III Universal Magnetic Holder
The RAM® Magnetic Power Plate™ III is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets, a composite cradle, and one adhesive metal plate. To mount your device to the magnet, you will need to attach the metal plate to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm metal plate with adhesive back.
Features:
Designed to hold a range of devices including radar detectors; rectangular metal plate attaches to the back of your device
Magnetic plate features adhesive, two powerful magnets, and cradle
Made of high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) 50mm x 38mm Steel Adhesive Plate, (2) Rare Earth Magnets, (4) #6-32 x 1/2" Machine Screws, (4) #6-32 Nylock Nuts
Hole Pattern: 4-Hole AMPS: 1.181" x 1.496"
Plate Size: 3.13" x 4"
Materials: High Strength Composite
|
15.24 |
|