Universal Control Unit Basic Security & Monitoring From basic insurance requirements to advanced security configurations. The main control unit is the central hub for all security and monitoring devices and sensors. With the ability to monitor up to 196 hard-wired or wireless devices and can be accessed and controlled locally through touchscreens or remotely from any device with an Internet connection. Base Package Includes: Main Control Unit x1 Door/Hatch Sensor x1 Mini-siren x1  Remote Keyfob x1

Wireless Analog Temperature Sensor Monitor the temperature of the engine room. Place the Wireless Module in the area that needs to be monitored, link the module to the GOST Universal Control Unit, and receive alerts if the temperature drops below a preset level.

High Water Sensor The Wireless High-Water Sensor detects if there is water in the bilge and instantly sends an alert to the GOST Specter App if water has risen above a preset level. Mount the Water Probe at the desired height in the bilge and plug the other end into the Wireless Module. Link the module to the GOST Universal Control Unit and receive alerts if your boat is taking on water.

MCU002 Remote Control Unit The MCU002 is a compact, waterproof remote control unit for use with the TZT9/14/BB. It offers the expandability of multi touch operation of the TZT9/14/BB to the hardware key operation, as the best supplemental tool to multi touch operation. With the MCU002, basic control of the NavNet TZtouch series is always within arms reach. The MCU002 consists of a simple joystick and 10 dedicated, logical hardware keys, offering control of nearly every aspect of the TZtouch system. The joystick can move in eight directions to move a cursor or scroll the screen. It also has a "push" functionality - for example, if you push the joystick on the Plotter screen, a contextual menu will appear. The MCU002 also offers control of the NavPilot 700 Autopilot when that system is integrated with NavNet TZtouch. Features: Complete control of all TZtouch features and functions Compactly sized for flexible installation (2.3"w x 4.5"h w/a modest .75" mounting depth) Combination of clickable joystick controller and tactile response buttons for simplified operation Auto-Scroll feature enables instant panning/scrolling by placing cursor at edge of screen USB 2.0 device w/2m cable, extendable w/optional USB 2.0 extension cable (tested up to 30m) Use w/Multi-touch controls & NavNet apps TZtouch v3.12 or later software required to support MCU002 functionality WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

OceanBridge Control Unit The OceanBridge is a patented multizone lighting controller designed specifically for controlling all of the boat’s lights from an MFD, smartphone, or tablet. This innovative system allows users complete control of the entire OceanLED range of lights and accessories, as well as most third-party (DMX or on/off) DC-powered lights. The OceanBridge gives users complete control over color change, music sync, color fade, color transitions, brightness, zone creation, and OceanLED's patented movement-to-color functionality. Ideal for All Types of Boats At OceanLED, they understand the need to control all the boat lights from a single interface. Whether users have a small rib, large sport fishing boat, sailing yacht, or motor cruiser, the OceanBridge ensures easy and seamless control. The small unit is quick to install and doesn’t require much space. Control is easy via an MFD, or if the boat isn’t equipped with an MFD, simply control the lights via a smartphone or tablet, thanks to the integrated Wi-Fi module. Custom Scene & Zone Control With the OceanBridge, you can create an incredible 10 lighting zones as standard and up to 10 lighting scenes. No matter how large the vessel is, the agility of fully customizable control means the possibilities are almost endless. OceanBridge scenes allow users to save pre-set lighting colors and modes, which can be easily assigned to any zone. Users can set OceanLED's unique sweep scene mode to any zone using lights of the same type, creating the ‘Knight Rider’ effect. The additional flexibility of adding up to four instant-on switches means control can be tailored to specific areas of the boat. Control Lights & Accessories Easily The advanced OceanBridge system allows you to create and control a lighting system with up to 64 (DMX or on/off) lights at one time; even non-OceanLED lights can be added to the system. With the use of splitters, the system can be expanded to over 150 lights. Plug-and-play control compatibility is ensured thanks to the system NMEA 2000 compatibility and supporting MFD network connectivity. You now have complete flexibility in one system. Intelligent Lighting Commands The OceanBridge makes syncing the underwater and onboard lights to music effortless. With the built-in AUX socket or via Bluetooth audio connection, users can set light colors and modes to automatically match music using the base, midtones, and treble. Alternatively, the unique addition of the built-in gyroscope allows the system to go even further. OceanLED's patent-pending design allows users to set the lights to change with the movement of a boat. OceanLED's timer function goes a step further, allowing users to trigger specific scenes at set times of the day or night. Universal Compatibility and Control The OceanBridge is compatible with all major MFD units, including Garmin, Simrad, Lowrance, B & G, Raymarine, and Furuno. OceanLED built the OceanBridge with complete accessibility in mind; no matter the boat, MFD, or lights, the OceanBridge is the complete control solution. Features: Color control Expandable system Touch-sensitive Universal compatibility  10 dynamic scenes 10 lighting zones Dynamic audio control Wave Motion Mode Technical Specifications: Water Protection Rating: IP66 Power Consumption: 6W (500mA @12V DC) Operating Voltage: 12/24V DC (Max 32V DC) Power Input: NMEA 2000 Connector Port Input Cable Glands: IP68 Output Cable Glands: IP68 Wi-Fi: Built-In External Switch Inputs: Supports Four External Switch Inputs Bluetooth: Built-In On-board Sensors: Gyroscope Sensor & Thermal Sensor Operating Temperature: -10°C to 50°C ambient Network Connections: NMEA 2000 connection & Ethernet connection Audio: 1 x Audio-In 3.5mm | 1 x Audio-Out 3.5mm Physical Specifications: Dimensions: 210mm x 91m x 65mm Weight:    490g Material: Robust Polycarbonate

JCU-1 Joystick Control Unit for M-Series - RJ45 Connection The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls. Controller Functions: Heated LCD screen - Instantly displays system status User-programmable "hot key" for commonly used functions Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard User-selectable color palettes change the video display mode for easier viewing based on operator preference User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity

JCU-1 Joystick Control Unit & Poe Injector Kit The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls. Controller Functions: Heated LCD screen - Instantly displays system status User-programmable "hot key" for commonly used functions Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard User-selectable color palettes change the video display mode for easier viewing based on operator preference User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity Power Over Ethernet Injector - 12V FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.

TracVision HD11 with IP Control Unit & World LNB World’s First Truly Global Satellite TV System with Full HD Support Welcome to the next generation of satellite TV at sea. The KVH TracVision® HD11 is a truly global satellite TV system with full support for DIRECTV HDTV entertainment as well as regional HD services around the globe. Designed with the modern yacht and advanced satellite technology in mind, this sleek, powerful, and easy-to-use 1-meter satellite TV system leaves every other system in its wake.  The TracVision HD11, with 4-axis stabilized tracking, offers: Patented TriAD™ multi-band technology to receive programming from DIRECTV Ka- and Ku-band satellites simultaneously Universal World LNB for full compatibility with many standard and HD regional satellite TV services without swapping LNBs or other hardware Greatest range of motion (-25° to +120°) of any maritime satellite TV system for superior tracking in all sea states and higher latitudes Features: Advanced satellite identification and fully integrated DVB-S2 compatibility IP-enabled antenna control unit with Ethernet connection and built-in Wi-Fi interface, for system setup and operation as simple as opening a web browser Full support for unlimited onboard receivers and DVRs (PVRs) Integrated GPS and NMEA 0183-compatibility for even faster satellite acquisition as well as keyhole satellite tracking along the Equator Integrated GSM Remote Support Module for diagnostics Exclusive TracVision iPhone® App to check signal strength, switch to secondary satellites, download antenna software updates, and more Explore Global Coverage The TracVision HD-series and TV-series are designed not only to provide the best possible performance but also a level of flexibility that will enable you to watch virtually any high-powered regional TV service around the globe. Explore our TV coverage around the world.

Electronics Control Unit (ECU) Power Cable, Threaded Collar - 2.5m Provide power to your electronic control unit (ECU) with Garmin's electronic control unit (ECU) power cable. Simply wire the electronic control unit (ECU) power cable to your boat battery as one of the last connections made during GHP™ installation. Compatible Devices: GHP™ 12 Autopilot System GHP™ 20 Marine Autopilot System with Smartpump WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Second Control Unit for NavPilot 711C Kick back, relax and let NavPilot steer you to your destination! FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile. The NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down. Self-learning and adaptive software From the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate. SAFE HELM and POWER ASSIST features provide Efficient and Effective Helm Steering Control The optional SAFE HELM and POWER ASSIST features provide a unique interface to the vessel's hydraulic hand steering system, providing unrivaled comfort and control of steering directly from any manual helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your autopilot. The POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based, power assisted steering, which greatly reduces manual helm effort in maneuvering situations. POWER ASSIST is a unique helm-activated assisted steering feature that can augment or replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy. SAFE HELM and POWER ASSIST modes will require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset. If you are interested in utilizing the "SAFE HELM" and "POWER ASSIST" features, it is highly recommend that, when installing the NavPilot 700 Series Autopilot, the optional FPS8 Power Steering Module is purchased and installed at the same time. This will eliminate the need to re-plumb the hydraulic system and run additional connection cables in the future. FishHunter mode FishHunter mode is a unique feature of FURUNO's NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB). Furuno's NavPilot series is designed to match the NavNet 3D, FI-50 Instrument series and other navigation equipment. The "Plug and Play" CAN bus interface allows for easy installation and exceptional interface ability. Features: NavPilot 711C second control unit, single din Color day/night graphic display offers improved sunlight viewability during the day while not affecting vision when the sun goes down Revolutionary SAFE HELM and POWER ASSIST option brings unrivaled steering comfort and control at the helm (This feature will be available in an upcoming software update) Selectable "Economy" and "Precision" Navigation Modes combine adaptive technology providing fuel and power savings of up to 2.5% or more "Precision" XTE accuracy: within 18' Dual NMEA2000 network interface and Furuno CAN bus interface provides isolation and redundancy for safety Simplified activation set-up by on-screen wizard Perfect for inboard or outboard power boats and sail boats Simple one-touch mode selection enables flexible steering and course control Perfect cosmetic match with NavNet TZtouch Mix and match up to 6 displays in a single network WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Weather Cover for Joystick Control Unit FLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather Cover has been designed by FLIR to guard against salty spray, moisture, and other irritants that could potentially damage your thermal camera's Joystick Control Unit. You should always put this thermal imaging accessory on your JCU when it is not in use to prevent possible damage. Keep it operating smoothly by using the FLIR Weather Cover. Features: Protective covering Protects the electronics of your Joystick Control Unit (JCU) Guards against moisture, salt and other irritants found in marine environments

ACU-150 Actuator Control Unit The Raymarine ACU-150 is a component of the Evolution™ Autopilot system and is designed to provide power and control to a Raymarine Type-1 Hydraulic Drive Unit (M81120.) The ACU-150 connects to the SeaTalkng network for communication with its other peripherals. It also has connections for an optional Rudder Reference Unit (sold separately.) The ACU-150 works on 12-volt DC systems only. To make a complete ACU-150 autopilot system you must also add the Type-1 Hydraulic Drive Unit (M81120), Evolution EV1 Sensor Core (E70096), Evolution Cable Kit (R70160) and either the p70s (E70328) or p70Rs (E70329) autopilot control head.

Electronic Control Unit (ECU) Garmin's Electronics Control Unit (ECU) is made specifically for the GHP™ 12 Autopilot System. Compatible Devices: GHP™ 12 Autopilot System GHP Reactor™ Mechanical/Retrofit/Solenoid Corepack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

JCU-2 Joystick Control Unit & POE Injector Kit JCU-2 Joystick Control Unit The joystick is the primary control for the M400 & M400XR and the new M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus. Includes  Joystick Control Unit (JCU2) Mounting hardware Power Over Ethernet Injector - 12V FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit. Includes: JCU-2 keypad Keypad mat Mounting gasket 4 x mounting screws, rubber washers, mounting clamps Cable gland nut RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft) Documentation pack  POE injector

Steering Trim Control Unit Trim Switches on the Steering Wheel Improve Safety and Performance.  This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel. Features: Puts trim switches on steering wheel for convenience and safety Allows driver to keep both hands on the steering wheel Mounts easily on steering wheel spokes Weatherproof rubber booted switches Rugged urethane coiled cord Can be used for trim control or jack plate control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.