Temp/Speed Sensor Temperature range of 25-99.9 degrees F. Speed range of 2-75 MPH.     Note: Requires purchase of AS T Y cable to connect with HELIX 5 Series, HELIX 7 Series, 600 Series, select 700 HD Series, 8x9 ci Series, 9x9 ci Series and 11x9 ci Series. 1-Year Limited Warranty Compatibility: Current Models: HELIX 10, HELIX 12, HELIX 5, HELIX 7, HELIX 9, SOLIX 12, SOLIX 15  Discontinued Models: 1100 Series, 500 Series, 600 Series, 700 Series, 800 Series, 900 Series, ONIX  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DX900+ Multilog Smart™ Electromagnetic Speed Sensor Thru‑Hull NMEA 0183 Say goodbye to the paddlewheel and hello to Smart® Sensor technology. The DX900+ uses electromagnetic technology to accurately measure dual-axis speed through water plus immediately calculate leeway travel. Paddlewheels need cleaning and only measure speed longitudinally. The DX900+ measures water flow at 360° and will immediately deliver the leeway data to your instrument. There are no moving parts to clean or maintain. Performance sailors, racers, or long-distance cruisers will immediately see the benefits of the accuracy and reliability of the DX900+. The DX900+ is available as a Speed and Water-temperature sensor. Features: Electromagnetic dual-axis speed, and water temperature with no moving parts Measures transverse and longitudinal speed that instantaneously calculates leeway angle and speed through water with no latency Connects and shares data wirelessly with AIRMAR’s CAST™ app. Perfect for displaying performance data on phones or tablets, plus makes calibration fast and easy. Outputs heel and trim The sensing pins in contact with the water are made from very high-quality alloy, allowing very stable measurements and high resistance to corrosion. (Do not use any bottom paint on exposed sensing pins.) Thru-hull, low-profile housing with water valve Retractable insert for safe storage Available in a plastic (P717V) or stainless steel (SS617V) housing Retrofits to existing P617V housing Specifications: Weight (sensor, box, and cable): Plastic—1 kg (2.3 lb.) Stainless steel—2 kg (4.4 lb.) Hull Material: Plastic housing for fiberglass or metal hull/Stainless steel housing compatible with all hull materials Deadrise Angle: Up to 22° Hole Diameter: Fiberglass or wood—51 mm or 2", Stainless steel housing in metal hull—57 mm or 2-1/4" Transverse Speed Range: ±6 knots Longitudinal Speed Range: ±60 knots Accuracy of Transverse and Longitudinal Speed: ±0.1 knots for speeds under 10 knots, ±1% for speeds above 10 knots Display Resolution: 0.01 knots Outputs: NMEA 0183—speed and temperature Configurable Data Update Rate: Up to 10 Hz Operating Temperature Range: -15°C to 55°C (5°F to 131°F) Water Temperature Accuracy: +0.5°C (+1.0°F) Power: Supply Voltage: 9 to 16 VDC Average Power Consumption: NMEA 0183 - 2.5 W Standard Cable Length: NMEA 0183 - 6M (20') Includes: Blanking plug CE Compliant: Yes to IEC60945 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Water Speed Sensor (4-Pin) f/echo™ Series Fishfinders Easily collect speed data and send it to your echo™ fishfinder with our water sensor. Simply mount our speed sensor on the transom of your vessel and connect it to your device. The paddle wheel on the speed sensor turns as the vessel moves through the water, and speed data is collected and displayed on your device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bike Speed Sensor 2 & Cadence Sensor 2 Bundle Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge® cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+® connectivity and BLUETOOTH® Low Energy technology.  With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transom Mount Speed Sensor Transom-mount paddle wheel 3.1 m (10ft) cable with Micro-C connector. Features Replaces EP-70 Outputs speed through water Transom-mount paddle wheel Ideal for slow, trolling speeds, where GPS is not as accurate Share paddle wheel speed to any networked display, unlike sonar based paddlewheel sensors

H3000 Speed Sensor - Plastic Flush Features: Plastic Flush Housing Integrated Sea Temperature sensor Self-Closing valve to enable easy removal of sensor Dimensions:138mm total/88mm housing  Construction: Plastic

Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer w/Temp - 4-Pin Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GT20-TM Transom Mount DownVü 500W (CHIRP 455/800kHz); Traditional 500W (77/200kHz) Transducer w/Temp - 8-Pin Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 8-pin transducer. This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (DownVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (DownVü); and 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

556TID-HDD SS260 Stainless Steel Thru-Hull Transducer w/Temp and Fairing Block - 10 Pin The SS260 is our best performing, stainless-steel, thru-hull stem for 1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for unparalleled deep-water performance and unmatched bottom and water-column detail. The SS260’s narrow beam gives crisp image detail especially suited for fishing shelves, intricate bottom structures, and wrecks. Standard Features 1,000 Watts Power 50/200 kHz with Diplexer 20/6 degree Beam Angles Stainless Steel Thru-Hull with Temperature 10-Pin Connector High Speed Fairing Block included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Temperature/Humidity Sensor with 24-Hour Fan Aspirated Radiation Shield Features both temperature and humidity sensors inside the 24-hour fan-aspirated radiation shield, which protects the sensors from solar radiation and other sources of radiated and reflected heat. This model includes a solar panel to power the motor-driven fan. Includes hardware for mounting on a fence post or pole and 25' (7,6M) cable. Features: Temperature and humidity sensors are inside a protective radiation shield that protects against solar radiation and other sources of radiated and reflected heat Wireless transmitter and battery are inside a weather-resistant shelter Updates every 2.5 seconds Frequency-hopping spread spectrum radio for continuous data transmission

Transom Mount Transducer w/ Temp, 1kW (10-Pin) M258 Transducer with Transom Mount Bracket 1 kW 50/200 kHz 14x23 degree/3x5 degree Beam Angles Transom Mount with Temperature 10 Meter Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Bronze Thru-Hull with Temperature 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Transducer w/ Temp, 600w (8-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Bronze Thru-Hull with Temperature 30 Foot Cable with 8-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Plastic Transom Mount with Temperature 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Temperature/Humidity Sensor w/Radiation Shield Features both temperature and humidity sensors inside the radiation shield, which protects the sensors from solar radiation and other sources of radiated and reflected heat. Includes hardware for mounting on a fence post or pole and 25' (7,6M) cable.