FishTrax™ Suction Cup Transducer Mounting Bracket The FishTrax™ Suction Cup Transducer Mount easily attaches the standard FishTrax™ transducer to any hull for optimal performance.  Click and go for easy installation and removal on any vessel.    *Transducer not included Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: Suction Cup with Lock Tab Stainless Steel Bolt & Thumb Nut Stainless Steel Lock Washers *Sold as an Individual

FishTrax™ Display Mounting Disc The TraxMount Suction Cup Mounting Disk is an adhesive pad disc that allows you to stick it to any surface and attach any FishTrax or TraxMount accessory that incorporates a suction cup.   No tools are required to install - simply clean the surface and stick to the surface using the strong adhesive base.  Compatible with: TraxMount suction cup display mount FishTrax™ suction cup transducer mount FishTrax™ IceShack enclosure In the Box: Suction Cup Mounting Disk 3M® Adhesive Backing *Sold as an Individual

Suction Cup Transducer Adapter Using your fishfinder as a portable unit? Use this suction cup adapter to attach your transom mount transducer to the side of your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bendable Suction Cup Base Mount with Mounting Disc Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat. Examples of Usage: Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at: The outboard engine The steering console, the windshield or any place on the hull where the lights are seen best On canoes and kayaks with a smooth and flat surface Specifications: Secure suction cup base Quick release suction cap Bendable shaft moves through 180° Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces Size: L = 68mm, H = 157mm Weight (net): 80g

RAM® Twist-Lock™ Composite Suction Cup Ratchet Mount with Socket Arm The RAP-B-104-224U-QU1, composite, ratchet/pivot, suction cup mount is a low profile, light weight and secure suction cup mount that is perfect for securing electronic devices in your mobile environment. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your electronic device in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device.  Features: Assembly Hardware Included Suction Size: 3.3" Diameter Ball/Socket Size: B Size (1") Weight Capacity: 2lbs Materials: High Strength Composite

RAM® Twist-Lock™ Composite Suction Cup Ratchet Mount with Diamond Plate The RAP-B-104-224U, composite, ratchet/pivot, suction cup mount is a low profile, light weight and secure suction cup mount that is perfect for securing electronic devices in your mobile environment. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your electronic device in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device.  Features: Assembly Hardware Included Suction Size: 3.3" Diameter Hole Pattern: 2-Hole AMPS: 1.912" Ball/Socket Size: B Size (1") Weight Capacity: 2lbs Materials: High Strength Composite

Suction Cup Spine Mount Secure your compatible device to your windshield or any smooth, flat surface with this suction cup mount. An additional Spine Mount Adapter is required when used with the inReach® Mini 2 device.

Kayak Scupper Transducer Mount Lowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 1-inch 200 kHz transducers. It's easy to install in most any scupper opening, with few tools, and without messy adhesives as with shoot-thru-hull transducer mountings. Best of all, the Lowrance Scupper Mount positions the Skimmer transducer, so it's totally submerged in the water you're fishing. That guarantees maximum sonar signal return sensitivity, producing the absolute clearest underwater returns of structure and fish possible.

STRIKER™ 4 Portable Fishfinder Bundle with 77/200kHz Transducer 3.5-inch CHIRP Fishfinder with GPS and Portable Kit Features: Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS Portable carrying case is perfect for kayak, canoe or ice fishing Find fish; mark and return to hot spots, docks and ramps Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak) Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately) STRIKER 4 fishfinder with portable carrying case is perfect for fishing from a kayak or canoe and is especially handy for ice fishing. Mark and return to your hot spots, boat ramps and docks. You also can share your favorite waypoints and routes with other STRIKER and echoMAP™ chartplotter combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Includes carrying case, rechargeable battery, CHIRP (77/200 kHz) transducer, tilt/swivel mount and transom and trolling motor mounting kit. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately). Experience the Clarity of CHIRP STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation. You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below. Mark Spots with High-Sensitivity GPS Unlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish. Navigate Easily with Waypoint Map Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp. Check Your Speed on Screen You can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas. Fish Vertically with Built-in Flasher STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it. Take Your Fishfinder Anywhere The portable kit protects and carries your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float. In The Box STRIKER 4 Dual-beam transducer Tilt/swivel mount Portable bag Base/handle Suction cup mount Foam float Kayak In-hull Transducer Mount Power cable Rechargeable battery AC charger Documentation Connections Transducer pin numbers: 4 Pin WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM Dual Articulating Suction Cup Base with 1" Ball Base RAM Suction Cups are regarded as one of the most impressive suction cups in the world. Their incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM Dual Articulating Suction Cup is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting. Features: Customize mounting position for convex and concave surfaces by repositioning suction cup bases Dual suction cups provide extra strength and stability for devices up to 5 lbs. Commercial grade product for unparalleled performance Dual suction cups for redundancy High strength materials maximize longevity of the mount Ball and socket mounting system offers ease of adjustment product adjustment Lifetime warranty Made in U.S.A. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Composite Twist Lock Suction Cup Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc The RAP-B-166-2-GA41U consists of a double socket arm, suction cup twist lock base, diamond adapter base and custom high strength composite cradle for the Garmin GPSMAP 62 series. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the suction cup GPSMAP mount to your optimum viewing position. This mount is designed to hold the following devices: Garmin Astro 320 Garmin GPSMAP 62 Garmin GPSMAP 62s Garmin GPSMAP 62sc Garmin GPSMAP 62st Garmin GPSMAP 62stc Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size

STRIKER™ 4 FishFinder with 4-Pin, 77/200kHz TM Transducer 3.5-inch CHIRP Fishfinder with GPS Features: Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS Find fish; mark and return to hot spots, docks and ramps Convenient keypad operation Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak) Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately) Finding fish is easier than ever with STRIKER 4 fishfinder. Mark and return to your hot spots, boat ramps and docks, and share your favorite waypoints and routes with other STRIKER and echoMAP™ combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount, CHIRP (77/200 kHz) transducer with transom and trolling motor mounting hardware and cable. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately). Experience the Clarity of CHIRP STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation. You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below. Mark Spots with High-Sensitivity GPS Unlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish. Navigate Easily with Waypoint Map Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp. Check Your Speed on Screen You can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas. Fish Vertically with Built-in Flasher STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it. Take Your Fishfinder Anywhere A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float. In The Box STRIKER 4 Dual-beam transducer Transom and trolling motor mounts Tilt/swivel mount Power cable Documentation Connections Transducer pin numbers: 4 Pin WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Garmin STRIKER™ 4 Fishfinder Worldwide Version with 77/200kHz - 4-Pin Transducer with Transom & Trolling Motor Mounts 3.5-inch CHIRP Fishfinder with GPS Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS Find fish; mark and return to hot spots, docks and ramps Convenient keypad operation Includes CHIRP (77/200kHz) sonar transducer; transmit power (200W RMS)/(1,600W peak-to-peak) Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately) Multi-language capability Finding fish is easier than ever with STRIKER 4 fishfinder. Mark and return to your hot spots, boat ramps and docks, and share your favorite waypoints and routes with other STRIKER and echoMAP_ combos. Smooth Scaling_ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount, CHIRP (77/200 kHz) transducer with transom and trolling motor mounting hardware and cable. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately). Experience the Clarity of CHIRP STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation. You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below. Mark Spots with High-sensitivity GPS Unlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish. Navigate Easily with Waypoint Map Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp. Check Your Speed on Screen Check Your Speed on Screen You can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas. Fish Vertically with Built-In Flasher STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it. Take Your Fishfinder Anywhere A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual Articulating Suction Cup w/Medium Length Double Socket Arm & Universal X-Grip® Cradle f/12" Large Tablets The RAM-B-189-PIV1-UN11U consists of a dual articulating 3.3" twist lock suction cup base, double socket arm, and universal X-Grip® cradle for 12" Tablets. The dual articulating suction cup base is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 7.25” Maximum Width = 8.75” Maximum Length (WITHOUT additional supports) = Unlimited Maximum Length (WITH additional supports) = 10.25” Depth = 0.875" Features: Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 2.45 lbs. *The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY.

FishTrax™ Adjustable Mounting Bracket with Suction Cup Utilizing the TraxMount FishTrax™ adjustable mounting bracket with suction cup you can easily mount your FishTrax™ fish finder to any flat surface on your kayak, small boat or canoe.  Combine it with a TraxMount Weighted Display Mount Pad or TraxMount Mounting Disk to maximize usability. Compatible with:  FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C *Sold as an Individual