Hypro 1543P-130ESP, 3" Polypropylene Gas-Driven Transfer Pump W/ Electric Start   Achieve the highest performance available in a 3" poly transfer pump (up to 484 GPM) with the highest efficiency and horsepower on the market. Ideal for nurse tank transfer and other closed system applications. The polypropylene housing and EPDM elastomers protect the pump from most chemicals and corrosive environments. Gas engine mount, pedestal mount or hydraulic drive options available Housing: 3" x 3" Polypropylene Pump seals: EPDM Mechanical Suction Lift: 25 ft/7.62m Poly impeller with stainless steel insert   Details: Max GPM: 440 Max PSI: 54 Port Size: 3" X 3" Engine: 13 HP PowerPro Engine with Electric Start  

Hypro 9303S-HM1C Centrifugal Pump w/Hyd Motor 114 gpm, 130 psi. Max Hydraulic 13 gpm. For Open/Closed Systems 1-1/2" NPT inlet, 1-1/4" NPT outlet.   Hypro 9303S-HM1C Centrifugal Pump.   Hypro centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc.   Hypro Series 9300 hydraulic motor-driven centrifugal pumps provide smooth performance. They can be conveniently mounted on the tractor or sprayer, becoming part of the vehicle’s hydraulic system and freeing the PTO for other uses. The Hypro “close-coupled” design reduces the mounting space required, eliminating long shafts and couplers between the pump and motor.   The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless steel pumps are ideal for use with Roundup® or other acid applications.   The series includes models 9303C-HM1C, 9303S-HM1C, 9303C-HM2C, 9303S-HM2C, 9303C-HM3C, 9303S-HM3C, 9303C-HM4C, 9303S-HM4C, 9303C-HM5C, and 9303S-HM5C.

Hypro 3430-0332, Kit For 9303   Seal and O-Ring Repair Kit   Fits the following pumps:   9202C, 9202S, 9202S-R, 9203C, 9203C-R, 9203S, 9203S-R, 9203C-SP, 9203C-R-SP, 9203S-SP, 9206C, 9206S, 9262C-C, 9262S-C, 926S-CR, 926C-CR-SP, 9263C-CR-SP-B, 9263C-C-SP, 9263S-C-SP, 9263C-C, 9263C-CR, 9263S-C, 9263S-CR   Hydrulic Driven:   9302CT-GM1, 9302C-HM1C, 9302C-HM2C, 9302C-HM4C, 9302ST-GM1, 9302S-HM1C, 9302S-HM2C, 9302S-HM4C, 9303C-HM1C, 9303C-HM2C, 9303C-HM3C, 9303C-HM4C, 9303C-HM5C, 9303S-HM1C, 9303S-HM2C, 9303S-HM3C, 9303S-HM4C, 9303S-HM5C, 9306C-HM1C, 9306C-HM3C, 9306C-HM5C, 9306S-HM1C, 9306S-HM3C, 9306S-HM5C, 9306C-HM1C-3U, 9306C-HM3C-3U, 9306C-HM5C-3U, 9306S-HM1C-3U, 9306S-HM3C-3U, 9306S-HM5C-3U   Belt Driven:   9403C-540-SP, 9403C-540Q-SP, 9403C-540S-SP, 9403C-1000-SP, 9403C-1000L-SP, 9402C-540, 9402C-540Q, 9402C-540S, 9402C-1000, 9402C-1000L, 9402C-1000S, 9403C-540, 9403C-540Q, 9403C-540S, 9403C-1000, 9403C-1000-MTZ, 9403C-1000S, 9403S-540, 9403S-540Q, 9403P-540S, 9403P-1000, 9403P-1000L, 9403P-1000S   Gas Driven:   1521C-65, 1521C-65M, 1538, 1522C-65SP, 1538-SP, 1536, 1539, 1537, 1540, 1536-SP, 1539-SP, 1538-SP, 1537-SP, 1540-SP  

Hypro 4101Xl-A, Roller Pump 7Gpm 150Psi Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.   Features: Max flow: 7 gpm Max pressure: 150 psi Max speed: 2600 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CW 5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)

Hypro 9203P-S, Polypropylene Centrifugal Pump 1-1/2" NPT Inlet, 1-1/4" NPT Outlet. 7/8" Solid, 316 Stainless Steel Shaft. CCW Rotation 100 gpm, 82 psi.   Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.   The broad, versatile line includes models with rugged housings of polypropylene that stand up to strong chemical herbicides. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.

Hypro 9910-D30-GRGI Diaphragm Pump 9.5 Gpm Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids. Pressure and output are designed for optimum performance of small to medium-sized sprayers.    Features: Max flow: 9.5 gpm Max pressure: 580 psi Max speed: 3600 rpm 2 diaphragms Port sizes: 1" HB inlet, 1/2" HB outlet Gearbox and pressure regulator (Model #: GS40GI) allow for the pump to be connected to a gas engine 

Hypro 9910-D403GRGI, 10.6 Gpm 580 Psi Pump W/Gear Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids.   Features: Max flow: 10.6 gpm Max pressure: 580 psi Port sizes: 1" HB inlet, 1/2" HB outlet Gearbox and pressure regulator allow for the pump to be connected to a gas engine

Hypro 4001N-Ah, Roller Pump   Intended for spraying and fluid transfer applications. This pump has a 1/2" hollow shaft and a maximum flow rate of 9.1 GPM at 1,800 RPM.   Performance Information for 4001N Ni-Resist w/ 1/2" Hollow Shaft Pump  Max. flow: 9.1 gpm/34.4 lpm at 1800 rpm Max. pressure: continuous 100 psi/6.9 bar; Max. pressure: intermittent 150 psi/10.3 bar Max. rated speed: 1800 rpm Max. fluid temperature: 140°F/60°C

Hypro 6500C, Roller Pump with Nylon Rollers   This 6-roller pump is made of cast iron (including the housing, rotor, and pump body with side ports), so it can easily handle most harsh chemicals. This pump is not recommended for nitrogen or fertilizer. It features a 5/8" solid shaft, 3/4" ports, and a counter clockwise rotation. Its rotary design is built to last; it has a dependable design with no check valves, less friction, and a lower starting torque than its competitors.    The Hypro 6500C Roller Water Pump runs when the PTO or engine moves the pump shaft. The liquid enters into the unit, which causes the rotor and shaft assembly to turn. Then the rollers expel the fluid through the pump housing and nozzle. This Hypro 6-roller pump has a maximum flow rate of 22 GPM at 1200 RPM.    This hydraulic pump unit has a 3/4" port and Viton shaft seals. A 1" hose barb is included with your purchase.   Specifications   Hypro 6500C Roller Water Pump 6 roller pump Maximum flow rate of 22 GPM at 1200 RPM 5/8" solid shaft 3/4 inch port, 1" hose barb, and Viton shaft seals Quick coupler not included: Use ASC# 27305 Duel speed coupler 540/1000 RPM

Hypro 9910-D252GRGI, Diaphragm Pump   This medium pressure diaphragm pump is recommended for ground and low-level spraying of herbicides or pesticides commonly used by landscapers, greenhouse operators and pest control companies. Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs.   Features:   2 semi-hydraulic diaphragms Inclusion of mounting base Maximum Flow Rate: 6.5 GPM Maximum Pressure: 290 P.S.I. Port Size: 3/4” HB inlet, 3/8” HB outlet Shaft Output: 3/4” hollow shaft Maximum Fluid Temperature: 140°F/60°C

Mate USA M164-500-13 24V BRONZE GEAR PUMP 12.2GPM UP14 Diesel Transfer Pump Bronze Gear Pump 12.2 GPM, 24V DC Self-priming electric pump of small dimension with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze. Ports: 3/4" NPT PSI: 29 Fuse: 15A

Jabsco Transfer Pump/Motor FEATURES Pump Body: Bronze Port Size: 1/2" NPT Female. Includes Two 3/4" Male Garden Hose Adapters. Flow: 6.0 GPM at 10 feet of head Pressure: to 17.3 PSI Impeller: Neoprene, Nitrile or Viton Shaft Seal: Lip Type Shaft: Stainless Steel Motor: 1/6hp - 115 Vac, 60 Hz. ODP Motor 1/4hp - 115 Vac, 60 Hz. TENV Motor Thermal Overload Protector Stainless Steel Shaft 8' Cord with 3 Prong Grounded Plug     APPLICATIONS / CHARACTERISTICS INDUSTRIAL: Circulating and transferring, velocitymixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment       FARMING: Pumping water for stock, pumping water from shallow wells and cisterns   MARINE: Washdowns, utility dock side pump     PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools   PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling     Jabsco Flexible Impeller Utility Pump 115V ODP Motor 6GPM Viton Impeller  

HYPRO 0402-9100P, IMPELLER FOR 9303S SERIES PUMPS POLYPROPYLENE STANDARD

Hypro 1320-0076, Roller Pump Kit PTO Adapter Roller Pump Kit Features Hypro 1320-0076 Shaft Adapter 1-3/8" ( 6 splines) PTO US, 34.9mm (6 splines) PTO Metric 5/16" Pump End US, 23.8mm Pump End Metric Forged Steel Material 540 RPM 1500, 1700, 7560, 7700 Pump Model

Hypro 1320-0081, ROLLER PUMP KIT PTO ADAPTER Adapter adapts solid shaft to 1-3/8" 6-spline PTO hollow shaft includes set screws Replacement for: 5206C; 5210C   Roller Pump Kit Features Hypro 1320-0081 PTO Shaft Adapter 1-3/8" ( 6 splines) PTO US, 34.9mm (6 splines) PTO Metric 1" Pump End US, 34.9 mm Pump End Metric Forged Steel Material 540 RPM