Linkage Arm f/Merc 9.9HP, 4 Stroke - Starboard Side Option f/Type R System Features: Linkage Arm Specifically for Merc 9.9HP 4 Stroke - Starboard Side Option for Type R System

Linkage Arm f/Merc 9.9HP, 4 Stroke - Port Side Option f/Type R System Features: Linkage Arm Specifically for Merc 9.9HP 4 Stroke - Port Side

WP018 Water Pump Repair Kit for Mercury Outboard Engines This water pump repair kit is designed for specific Mercury outboard engines. Fits: Mercury 9.9 hp 4-stroke outboards Replaces: MERCURY Water Pump Repair Kit 46-99157T2 MERCURY Water Pump Repair Kit 99157A2 MERCURY Water Pump Repair Kit 85098A2 Warranty Information When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4 Blade aluminum propeller for 8-15 horsepower engines with 13 tooth spline and thru hub exhaust. 2-1/2" gear case. 8HP (4-Stroke) 1996-2005; 9.9, 15HP (2-Stroke) 1974-2005; 9.9, 15HP (4-Stroke) 1995-2001

Type R for Cable Steered Boats with Auxiliary Outboards Features: Drive connects to kicker Electronic clutch disengages for manual steering Rotary drive system Safety override technology Current 1.25A typical, 5A peak 6' steering cable for connecting drive unit included Requires outboard link arm assembly Wireless control module plus handheld pendant - steering in the palm of your hand Steer, fish and cruise from anywhere on the boat Easy DIY installation - no need for professional installer 2 Year limited warranty - purchase with confidence Specifications: Wireless Controller & Receiver Meets FCC standards Additional Handheld and receiver can be paired in field Pendant and receiver auto-off in 30 minutes if no usage Over 1 Million control codes provide enhanced security Handheld Pendant Water proof Supplied with 2xAAA batteries Includes lanyard Wireless Receiver & Motor Controller Waterproof Motor drive capability up to 25A Overload protection Reverse polarity protection 12V DC nominal (9V min - 16V max operating range) Offers pass-through capability for Autopilot motor and clutch control circuits

Garmin 12-Pin Transducer Y-Cable Port/Starboard - 10m Connect a port/starboard pair of thru hull or transom mount transducers to the sonar unit with this 12-pin Y-cable. This cable allows the use of two different transducers to produce the left and right SideVü images to avoid engine lower unit or keel/hull shadowing. The right-side (starboard) transducer is used for Traditional, ClearVü, and right- SideVü images plus water temperature and transducer ID. The left-side (port) transducer is used for left-SideVü images. Compatible with all 12-pin GT transducers. Connect a port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Air cooled rectifier and regulator for Johnson and Evinrude outboards.

Type R - Stand Alone Remote LOW COST SOLUTION - No need to change to hydraulic steering EASY TO FIT - Simple to install kits DISCREET INSTALLATION - All components mounted out of sight TIME SAVING - Rudder feedback option mounts directly on drive SAFE - Manual override without disengaging the autopilot COMPATIBLE WITH ALL MAJOR AUTOPILOT BRAND ELECTRONICS simple solutions for difficult installations For mounting as a separate drive system with its own cable and mounting kit. The Remote drive unit can be installed in any convenient location; it requires the addition of a second steering cable and connection kit. There are connection kits for Mercruiser or Volvo Penta stern drive engines, Outboard engines and a universal kit for inboard engines. The drive is mounted in a location away from the heat and vibrations of the engine. An interconnect cable is used to connect it to the engine steering system using one of the simple to mount connection kits.

Type R - Stand Alone Remote LOW COST SOLUTION - No need to change to hydraulic steering EASY TO FIT - Simple to install kits DISCREET INSTALLATION - All components mounted out of sight TIME SAVING - Rudder feedback option mounts directly on drive SAFE - Manual override without disengaging the autopilot COMPATIBLE WITH ALL MAJOR AUTOPILOT BRAND ELECTRONICS simple solutions for difficult installations For mounting as a separate drive system with its own cable and mounting kit. The Remote drive unit can be installed in any convenient location; it requires the addition of a second steering cable and connection kit. There are connection kits for Mercruiser or Volvo Penta stern drive engines, Outboard engines and a universal kit for inboard engines. The drive is mounted in a location away from the heat and vibrations of the engine. An interconnect cable is used to connect it to the engine steering system using one of the simple to mount connection kits.

OC15109-6 Steering Cable 8" Stroke x 6' long For use with Type R Remote Drive Unit

Sterndrive System f/Mercruiser from 1994 & North American Volvo from 1997 w/9' Cable The heart of this pilot drive system is the remote drive. The drive unit is connected to the boat steering by a cable and connection kit. The remote drive system is ideal for the following three types of engine application: Stern drives also known as I/O drives or Z drives Outboard engines up to 150HP Inboard engines requiring traditional rudder steering Features: Low Cost Solution - No need to change to hydraulic steering Easy to Fit - Simple to install kits Discreet Installation - All components mounted out of sight Time Saving - Rudder feedback option mounts directly on drive Safe - Manual override without disengaging the autopilot Compatible with all major autopilot brand electronics - simple solutions for difficult installations

Spacer Kit for Type T System - 0.51" Features: 13mm (0.51") Spacer Kit Use with 90° bezel Specifically for Type T System

RV-220S RealVision 3D™ Starboard Side Thru-Hull CHIRP Bronze Transducer - 20° - 2M Cable - Replacement transducer The RV-220 system features rugged cast-bronze thru-hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downward, the other to starboard and downward, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions.  Features: Gyro-stabilized sonar technology: Gyro stabilization compensates for boat movement, delivering lifelike 3D sonar imagery. Wide spectrum CHIRP sonar: Transmits on 60 different frequencies for the most lifelike sonar imagery and simply the best fish targeting – hands down! Easy fish identification: Easily identify structure and locate fish with the lifelike clarity of RealVision™ 3D sonar Powerful four-channel sonar: Supports RealVision 3D, CHIRP DownVision, SideVision, high frequency CHIRP, and 600W  50/200kHz traditional sonar

Series 101-001 - Starboard Side Light - 1NM - Vertical Mount - Green - Silver Housing Lopolight started out back in 2004, offering many solutions and neat combinations for all size boats and yachts. The tradition continues.  Lopolight offers a full range of navigation lights dedicated for boats and yachts, resulting in an elegant,  compact and precise solution with good value for money.   Features: Navigation Light - Starboard Light Technical Specifications: Visibility - 1NM Vessel size - Under 39.37' (Under 12M) Operating Voltage - 10 - 32 VDC Number of LED Bulbs - 1 Light Color - Green Mounting - Vertical Materials - Anodized aluminum Connection - 8.2' (2.5M) cable IP rating - IP68 Weight - 13.76oz  Certifications: U.S.C.G. EN14744 COLREG72 In the Box: Navigation light w/8.2' (2.5M) cable Mounting hardware Installation guide *Sold as an Individual

Original Equipment Quality Replacement Solenoid for Mercruiser, Mercury & Yamaha 4 Stroke - 12V Isolated Base Replacement solenoid that will fit Mercruiser, Mercury & Yamaha 4 Stroke, Isolated base, 12 Volt. Replaces: MERCURY 89-818999A1 MERCURY 89-818999A2 MERCURY 89-850188A1 MERCURY 89-850188T1 YAMAHA 65W-81941-00 SIERRA 18-5820 *ARCO Assurance 12-month part and labor warranty protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.