Drill Pumps Jabsco drill pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. They provide easy powered pumping almost anywhere a hand utility pump might be used. Pumps up to 3.5 gpm Self-priming to 3ft 1/4" diameter shaft Supplied with 3/4" garden hose thread port adapters WARNING: This product can expose you to chemicals including COBALT METAL POWDER which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Aqua Jet Wash Down Kit 5.2 New 19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5 meters (25') of coiled wash down hose all in one package. Aqua Jet wash down pump kit makes it easy to add a wash down pump to any boat. CE-Approved Feaures: Whisper quiet operation Five-chamber construction Smooth flowing Self-priming Easy, low cost maintenance Quick-connect hose Long service life Connection: 1/2" NPT / hose 3/4". 3/4" GHT, Hose 3/4" GHT Bulkhead fitting - Inlet 3/4" hose, outlet 3/4" GHT

5.2GPM Aqua Jet Wash Down Kit 20 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5 meters (25') of coiled wash down hose all in one package. Aqua Jet wash down pump kit makes it easy to add a wash down pump to any boat. Integrated pressure switch turns pump on and off automatically when the spray nozzle is opened and closed Dry running without damage Low power consumption.

  Jabsco's NEW VFlo Water Pressure Pump, Quiet With A Constant Flow     The new variable flow, constant water pressure pump now featuring the revolutionary new technology, designed to automatically diagnose and monitor all aspects of your pump and water pressure system performance to prevent system failure. V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow needed to perform the variety of onboard delivery tasks.     Specials   Closeouts    Remanufactured    Rebates

Jabsco 17250-0003 Drill Pump, 1/4"   FEATURES Pump Body: Plastic Port Size: Connections for 1/2" (13mm) ID hose and 3/4" GHT female threaded fittings. Flow: up to 3.5 gpm (13 lpm) Impeller: Nitrile Shaft: 1/4" diameter shaft (6.5mm)     APPLICATIONS / CHARACTERISTICS Jabsco Drill Pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. They provide easy powered pumping almost anywhere a hand utility pump might be used. Includes pump and Garden Hose Adaptors only.     Jabsco Drill Pump Only With 2 Garden Hose Adaptors 3.5GPM, 1/2" Hose and Garden Hose Ports  

Micropump GJ-N25.FF1S.J-P4 Pump Head I Drive Mt Micropump GJ-N25.FF1S.J-P4 Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L25689 constructed of Base Material 316SS, Gear Material PTFE and Shaft Material 316SS. Micropump L25689 GJ Series Pumphead with Port/fittings 1/4-18 NPT Ports, Max Speed 5500 RPM, Max Pressure 300 psi and Max Temp 54.4444444444444 (C). Pump Series: GJ Series Ports/Fittings: 1/4-18 NPT Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 54.4444444444444 Max Diff. Pressure (psi): 49.03225806451613 Displacement (ml/rev): 0.91 Design: Standard Design Gear Set: 0.500/2/24 (0.91ml/rev) Gear Material: PTFE Static Seals: PTFE Gasket (.004) 5369 Base Materials: 316SS Drive Mount: I-Drive® IEG Bypass: No Driven: Ferrite Driving Magnet: I-Drive®, IEG High System Pressure: No Bushings: PTFE Shafts: 316SS Gear Trim: None Part Number: L25689 Model: GJ-N25.FF1S.J-P4

JMP Marine Volvo Penta Replacement Engine Cooling Seawater Pump Replaces Volvo Penta 3583115, 3581558, 860629, Johnson 10-24394-01, 10-24524-01 JPR-V1000 JMP Marine Volvo Penta Replacement Engine Cooling Raw Water Pump   Product Information & Specs: Uses JMP Impeller p/n: 7400-01K Port Type: 1" Hose Pump Size (LxWxH): 129mm x 158mm x 90mm Pump Weight (approx): 6.0 lbs (2.73 kgs) Replaces Genuine Volvo Penta Pump p/n(s): 3583115 (Old 3581558, 860629) Replaces Johnson Pump p/n(s): 10-24394-01, 10-24524-01 Engine Model(s): AD31/41/43, TAMD31/41/42, KAD32/42/43/44, KAMD42/43/44, MD31, TMD31/41   Parts Internally Compatible to Genuine: NO   Changes made: Ball Bearing, Screw for Cover, Cam, Screw for Cam, Gasket for Cam, End Cover, Mechanical Seal, O-Ring for End Cover, Oil Seal, Shaft, Small Snap Ring for Better Quality & Peformance   Product Features: Universal Model Plug & Play Replacement Heavy Duty Marine Grade Casting Marine Grade Shaft (3X Series Non-Magnetic) Durable Double Ball Bearing O-Ring Packing High Performance Flexible Impeller Mechanical Seal instead of Lip Seal  

Jabsco 99202-1000-J Vortex Pump Kit Complete

Autopilot Hydraulic Steering Installation Kit w/Hoses & Fittings Hydraulic Hose & Fittings Kit Includes: (2) - 30" Flexible High Pressure Hyd. Hose's (1) - 30" Flexible Low Pressure Hyd. Hose O.R.B Helm fitting kit NPT Helm fitting kit

Run-Dry Macerator Waste Pump WASTE EVACUATION The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage. FISH BOX AND LIVEWELL TANK EVACUATION The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties. Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats. Triple sealed motor to prevent both internal and external motor corrosion New Four-bladed chopper reduces clogging Detects the absence of fluid then shuts-off pump before impeller is damaged Sensor provides adequate run-dry period to allow initial priming of the pump Interrupting power supply to the macerator resets the Run-Dry Device Flow rate to 12 gpm Self-priming to 4ft Fitting: Inlet Port: 1-1/2" Hose Barb plus 1-1/2 NPT Discharge Port: 1" Hose Barb WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Yanmar YM 119773-42652-J Raw Water Pump JPR-YM06LPB SW PUMP 6LPB

Scot Pump 35068-J-2.50 MOTOR/PUMP 2.5" IMPELLER Pump • All Bronze marine centrifugal pump Freshwater or seawater applications • Precision machined to close tolerances for consistent performance. • Hardware - Type 303 stainless steel • Semi-open impeller handles solids • Heavy-duty. Use for continuous 24 hour – 7 day operation. • Stainless steel shaft.   Shaft Seal • Rated at 75 PSI – 5 BAR • Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components   Motor – 2 Pole • Totally enclosed fan cooled IP-44 motors meet marine, European, and Coast Guard ignition protected requirements. • Sealed ball bearings • Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt • Motors are dual frequency 50 Hz or 60 Hz • Three phase motors are not available

Verado Installation Kit with Hoses

Neoprene Impeller Kit with Cover, Gasket or O-Ring - 6-Blade - 5/16 Shaft Diameter Jabsco's Neoprene Impeller Kit is used specifically in Jabsco's Water Puppy, Part #6617. Included: Cover Gasket O-Ring WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

JMP Marine JPR-VP0020D Volvo Penta Replacement Seawater Pump Replaces Volvo Penta 3583089, Johnson 10-13283, Ancor ST347, AN5893 Note: Pump Without Gear   Product Information & Specs: Uses JMP Impeller p/n: 7100-01K Pump Weight (approx): 4.25 LBS (1.93 KG) Replaces Genuine Volvo Penta Pump: 3583089 Replaces Johnson Pump: 10-13283 Replaces Ancor Pump: ST347, AN5893 Engine Model(s): D2 SERIES D2-55A/B/C/D/E/F, D2-75A/B/C/F   Parts Internally Compatible to Genuine: YES   Product Features: Plug & Play Replacement Heavy Duty Marine Grade Casting Marine Grade Shaft (3X Series Non-Magnetic) Lip Seal High Performance Flexible Impeller